prikaz prve stranice dokumenta SIMULACIJA TEČENJA POLIMERNE TALJEVINE U KALUPNOJ ŠUPLJINI ZA OTPRESAK PREMA CRTEŽU KPP1/2020
Access restricted to students and staff of home institution
master's thesis
SIMULACIJA TEČENJA POLIMERNE TALJEVINE U KALUPNOJ ŠUPLJINI ZA OTPRESAK PREMA CRTEŽU KPP1/2020
Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2020. urn:nbn:hr:153:889543
Širić, Marko
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod

Institutional repository: Repository of Mechanical Engineering in Slavonski Brod

Cite this document

Širić, M. (2020). SIMULACIJA TEČENJA POLIMERNE TALJEVINE U KALUPNOJ ŠUPLJINI ZA OTPRESAK PREMA CRTEŽU KPP1/2020 (Master's thesis). Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:889543

Širić, Marko. "SIMULACIJA TEČENJA POLIMERNE TALJEVINE U KALUPNOJ ŠUPLJINI ZA OTPRESAK PREMA CRTEŽU KPP1/2020." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2020. https://urn.nsk.hr/urn:nbn:hr:153:889543

Širić, Marko. "SIMULACIJA TEČENJA POLIMERNE TALJEVINE U KALUPNOJ ŠUPLJINI ZA OTPRESAK PREMA CRTEŽU KPP1/2020." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2020. https://urn.nsk.hr/urn:nbn:hr:153:889543

Širić, M. (2020). 'SIMULACIJA TEČENJA POLIMERNE TALJEVINE U KALUPNOJ ŠUPLJINI ZA OTPRESAK PREMA CRTEŽU KPP1/2020', Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 21 December 2024, https://urn.nsk.hr/urn:nbn:hr:153:889543

Širić M. SIMULACIJA TEČENJA POLIMERNE TALJEVINE U KALUPNOJ ŠUPLJINI ZA OTPRESAK PREMA CRTEŽU KPP1/2020 [Master's thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2020 [cited 2024 December 21] Available at: https://urn.nsk.hr/urn:nbn:hr:153:889543

M. Širić, "SIMULACIJA TEČENJA POLIMERNE TALJEVINE U KALUPNOJ ŠUPLJINI ZA OTPRESAK PREMA CRTEŽU KPP1/2020", Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2020. Available at: https://urn.nsk.hr/urn:nbn:hr:153:889543

Metadata
TitleSIMULACIJA TEČENJA POLIMERNE TALJEVINE U KALUPNOJ ŠUPLJINI ZA OTPRESAK PREMA CRTEŽU KPP1/2020
Title (english)SIMULATION OF MOLD FLOW IN INJECTION MOLD CAVITY FOR MOLDED PART ACCORDING DRAWING NUMBER KPP1/2020
AuthorMarko Širić
MentorJosip Stojšić (mentor)
Committee memberJosip Stojšić (član povjerenstva)
Committee memberDaniel Novoselović (predsjednik povjerenstva)
Committee memberJosip Cumin (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Slavonski Brod
Defense date and country2020-07-23, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U radu je prikazano injekcijsko prešanje, te računalna simulacija tečenja polimerne taljevine u kalupnoj šupljini prema crtežu KPP1/2020. Rad se sastoji iz 2 dijela, teorijskog dijela i računalne simulacije. U prvom dijelu tj. teorijskom definirani su pojmovi polimernih materijala, njihove strukture i injekcijskog prešanja. Definirane su i vrste i svojstva polimernih materijala, te postupak injekcijsko prešanja. U drugom dijelu, analizom teorijskog dijela izrađena je simulacija u programskom paketu Moldflow. Na kraju je provedena simulacija punjenja kalupne šupljine te su rezultati prikazani grafički i numerički.
Abstract (english)
This paper presents injection molding and computer simulation of the flow of polymer melt in the mold cavity according to the drawing KPP1/2020. The paper consists of 2 parts, a theoretical part and a computer simulation. In the first part, the theoretically, the terms of polymeric materials, their structure and injection molding are defined. The types and properties of polymeric materials and the injection molding process are also defined. In the second part, the analysis of the theoretical part made a simulation in the software package Moldflow. Finally, a simulation of the mold cavity filling was performed and the results were presented graphically and numerically
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:889543
Study programmeTitle: Graduate Study Mechanical Engineering; specializations in: Design and Product Development, Manufacturing Logistics, Materials Engineering, Engineering Technologies, Power Engineering
Course: Design and Product Development
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2020-09-09 06:12:05