prikaz prve stranice dokumenta Ispitivanje obradivosti Ti legura
Access restricted to students and staff of home institution
master's thesis
Ispitivanje obradivosti Ti legura
Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2020. urn:nbn:hr:153:884502
Bendra, Jakov
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod

Institutional repository: Repository of Mechanical Engineering in Slavonski Brod

Cite this document

Bendra, J. (2020). Ispitivanje obradivosti Ti legura (Master's thesis). Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:884502

Bendra, Jakov. "Ispitivanje obradivosti Ti legura." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2020. https://urn.nsk.hr/urn:nbn:hr:153:884502

Bendra, Jakov. "Ispitivanje obradivosti Ti legura." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2020. https://urn.nsk.hr/urn:nbn:hr:153:884502

Bendra, J. (2020). 'Ispitivanje obradivosti Ti legura', Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 27 November 2024, https://urn.nsk.hr/urn:nbn:hr:153:884502

Bendra J. Ispitivanje obradivosti Ti legura [Master's thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2020 [cited 2024 November 27] Available at: https://urn.nsk.hr/urn:nbn:hr:153:884502

J. Bendra, "Ispitivanje obradivosti Ti legura", Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2020. Available at: https://urn.nsk.hr/urn:nbn:hr:153:884502

Metadata
TitleIspitivanje obradivosti Ti legura
Title (english)Testing of machinability of Ti-alloys
AuthorJakov Bendra
MentorAntun Stoić (mentor)
Committee memberAntun Stoić (član povjerenstva)
Committee memberMiroslav Duspara (predsjednik povjerenstva)
Committee memberJosip Cumin (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Slavonski Brod
Defense date and country2020-07-23, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovom radu je opisano ispitivanje hrapavosti tj. obradivosti Ti legura prilikom promjena parametara obrade. Ispitivanje se provodi na Ti legurama koje se koriste u medicinske svrhe. Rad se sastoji od teorijskog i eksperimentalnog dijela. Teorijski dio se sastoji od nekoliko poglavlja u kojemu je opisana obradivost materijala (općenito) te primjeri medicinskih proizvoda od titanovih legura te u konačnici odabir proizvoda za ispitivanje obradivosti tj. hrapavosti. Eksperimentalni dio se sastoji od poglavlja ispitivanja obradivosti Ti legura na konkretnom proizvodu. Za ispitivanje obradivosti izrađeni su etaloni određenih promjera i duljina na kojima se vrši obrada odvajanjem čestica s različitim parametrima obrade. Na obrađenim etalonima provedeno je ispitivanje hrapavosti u svrhu otkrivanja utjecaja parametara na najveću hrapavost materijala.
Abstract (english)
This paper describes the testing of roughness, respectively machinability of Ti alloys during changes in machining parameters. The test is performed on Ti alloys used for medical purposes. The paper consists of a theoretical and an experimental part. The theoretical part consists of several chapters which describe the workability of the material (in general) and examples of medical products made of titanium alloys and finally the selection of products for testing workability, respectively roughness. The experimental part consists of the chapter on testing the workability of Ti alloys on a specific product. To test workability, standards of certain diameters and lengths have been developed on which machining is performed by separating particles with different machining parameters. Roughness testing was performed on the processed standards in order to detect the influence of parameters on the maximum roughness of the material.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:884502
Study programmeTitle: Graduate Study Mechanical Engineering; specializations in: Design and Product Development, Manufacturing Logistics, Materials Engineering, Engineering Technologies, Power Engineering
Course: Design and Product Development
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2020-09-09 06:20:44