prikaz prve stranice dokumenta Analiza geometrijskih značajki odvojenih čestica pri ispitivanju obradivosti Ti legura
Access restricted to students and staff of home institution
master's thesis
Analiza geometrijskih značajki odvojenih čestica pri ispitivanju obradivosti Ti legura
Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2020. urn:nbn:hr:153:205563
Rica, Matea
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod

Institutional repository: Repository of Mechanical Engineering in Slavonski Brod

Cite this document

Rica, M. (2020). Analiza geometrijskih značajki odvojenih čestica pri ispitivanju obradivosti Ti legura (Master's thesis). Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:205563

Rica, Matea. "Analiza geometrijskih značajki odvojenih čestica pri ispitivanju obradivosti Ti legura." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2020. https://urn.nsk.hr/urn:nbn:hr:153:205563

Rica, Matea. "Analiza geometrijskih značajki odvojenih čestica pri ispitivanju obradivosti Ti legura." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2020. https://urn.nsk.hr/urn:nbn:hr:153:205563

Rica, M. (2020). 'Analiza geometrijskih značajki odvojenih čestica pri ispitivanju obradivosti Ti legura', Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 17 February 2025, https://urn.nsk.hr/urn:nbn:hr:153:205563

Rica M. Analiza geometrijskih značajki odvojenih čestica pri ispitivanju obradivosti Ti legura [Master's thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2020 [cited 2025 February 17] Available at: https://urn.nsk.hr/urn:nbn:hr:153:205563

M. Rica, "Analiza geometrijskih značajki odvojenih čestica pri ispitivanju obradivosti Ti legura", Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2020. Available at: https://urn.nsk.hr/urn:nbn:hr:153:205563

Metadata
TitleAnaliza geometrijskih značajki odvojenih čestica pri ispitivanju obradivosti Ti legura
Title (english)Analysis of the geometric characteristics of separated particles when testing the machinability of Ti alloys
AuthorMatea Rica
MentorAntun Stoić (mentor)
Committee memberAntun Stoić (član povjerenstva)
Committee memberMiroslav Duspara (predsjednik povjerenstva)
Committee memberJosip Cumin (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Slavonski Brod
Defense date and country2020-07-23, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Istraživanjem dostupne literature vezane za obradivost titan legura i geometrijske oblike odvojenih čestica izrađen je ovaj diplomski rad. Kroz diplomski rad prikazana je analiza geometrijskih značajki odvojenih čestica pri ispitivanju obradivosti titan legura. Rad se sastoji od dva dijela, teorijskog dijela i zadatka. U teorijskom dijelu opisana su svojstva titana i njegovih legura, obradivost titana, te oblici odvojenih čestica kao kriterij obradivosti. U drugom dijelu analiziran je utjecaj parametara režima obrade (dubina rezanja, broj okretaja i posmak) na geometrijske oblike odvojenih čestica.
Abstract (english)
This graduate thesis was made by exploring the available literature related to the workability of titanium and titanium alloys and the geometric shapes of separated particles. Through the graduate thesis, the analysis of geometric characteristics of separated particles in the examination of machinability of titanium alloys is presented. The work is based off of two components, the theoretical part and the assignment. The property of titanium and its alloys, the machinability of titanium and the shapes of separated particles as criteria for machinability are defined in the theoretical part. In the second part, the influence of processing regime parameters (cutting depth, number of revolutions and offsets) on the geometric shapes of separated particles is analyzed.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:205563
Study programmeTitle: Graduate Study Mechanical Engineering; specializations in: Design and Product Development, Manufacturing Logistics, Materials Engineering, Engineering Technologies, Power Engineering
Course: Design and Product Development
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2020-09-09 06:28:52