prikaz prve stranice dokumenta PRORAČUN I KONSTRUKCIJA UKOVNJA ZA IZRADU KRIŽA KARDANA PO TEHNIČKOM CRTEŽU D_SZ_2020
Access restricted to students and staff of home institution
master's thesis
PRORAČUN I KONSTRUKCIJA UKOVNJA ZA IZRADU KRIŽA KARDANA PO TEHNIČKOM CRTEŽU D_SZ_2020
Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2020. urn:nbn:hr:153:290907
Zaklanović, Svetozar
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod

Institutional repository: Repository of Mechanical Engineering in Slavonski Brod

Cite this document

Zaklanović, S. (2020). PRORAČUN I KONSTRUKCIJA UKOVNJA ZA IZRADU KRIŽA KARDANA PO TEHNIČKOM CRTEŽU D_SZ_2020 (Master's thesis). Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:290907

Zaklanović, Svetozar. "PRORAČUN I KONSTRUKCIJA UKOVNJA ZA IZRADU KRIŽA KARDANA PO TEHNIČKOM CRTEŽU D_SZ_2020." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2020. https://urn.nsk.hr/urn:nbn:hr:153:290907

Zaklanović, Svetozar. "PRORAČUN I KONSTRUKCIJA UKOVNJA ZA IZRADU KRIŽA KARDANA PO TEHNIČKOM CRTEŽU D_SZ_2020." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2020. https://urn.nsk.hr/urn:nbn:hr:153:290907

Zaklanović, S. (2020). 'PRORAČUN I KONSTRUKCIJA UKOVNJA ZA IZRADU KRIŽA KARDANA PO TEHNIČKOM CRTEŽU D_SZ_2020', Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 28 November 2024, https://urn.nsk.hr/urn:nbn:hr:153:290907

Zaklanović S. PRORAČUN I KONSTRUKCIJA UKOVNJA ZA IZRADU KRIŽA KARDANA PO TEHNIČKOM CRTEŽU D_SZ_2020 [Master's thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2020 [cited 2024 November 28] Available at: https://urn.nsk.hr/urn:nbn:hr:153:290907

S. Zaklanović, "PRORAČUN I KONSTRUKCIJA UKOVNJA ZA IZRADU KRIŽA KARDANA PO TEHNIČKOM CRTEŽU D_SZ_2020", Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2020. Available at: https://urn.nsk.hr/urn:nbn:hr:153:290907

Metadata
TitlePRORAČUN I KONSTRUKCIJA UKOVNJA ZA IZRADU KRIŽA KARDANA PO TEHNIČKOM CRTEŽU D_SZ_2020
Title (english)FORGING TOOL CALCULATION AND CONSTRUCTION FOR U-JOINT CROWN SPICER
AuthorSvetozar Zaklanović
MentorJosip Cumin (mentor)
Committee memberJosip Cumin (član povjerenstva)
Committee memberDaniel Novoselović (član povjerenstva)
Committee memberJosip Stojšić (predsjednik povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Slavonski Brod
Defense date and country2020-07-23, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U radu je ukratko opisana tehnologija kovanja i dvije glavne podjele. Uspoređene su ostale tehnologije kojima je moguće izraditi križ kardana s primarnom tehnologijom izrade ovog proizvoda te su navedene glavne prednosti i nedostatci. Prema crtežu D_SZ_2020 potrebno je klasificirati otkivak, odrediti potrebne gravure, odabrati stroj i napraviti proračun prema kojemu će se konstruirati i dizajnirati alat za kovanje. Prema obliku otkivka utvrđeno je da se kovanje vrši u dvije faze, odnosno ukovanj mora imati gravuru za sabijanje i završnu gravuru. Nakon obavljenog proračuna konstruiran je ukovanj i izrađena je potrebna dokumentacija pomoću programa Solidworks 2016 za izradu istog.
Abstract (english)
This paper briefly describes the forging technology and the two main groups. Other technologies which are able to produce same product (universal joint) are compared with primary technology used to make this part and the main advantages and disadvantages are mentioned. Using the technical drawing D_SZ_2020, it is necessary to classify the forged part, determine the necessary engravings, select the machine and make a calculation according to which the forging tool is constructed and designed. Based on the forged part design, it has been determined that the forging will be performed in two phases. The forging must have a compression engraving and a final engraving. After the calculation, the forging tool is designed and the necessary documentation for it's production is prepared using Solidworks 2016.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:290907
Study programmeTitle: Graduate Study Mechanical Engineering; specializations in: Design and Product Development, Manufacturing Logistics, Materials Engineering, Engineering Technologies, Power Engineering
Course: Design and Product Development
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2020-09-09 08:32:30