prikaz prve stranice dokumenta TOLERNACIJE DULJINA, KUTOVA, OBLIKA I POLOŽAJA KOD ZAVARENIH KONSTRUKCIJA PREMA HRN EN ISO 13920
Access restricted to students and staff of home institution
master's thesis
TOLERNACIJE DULJINA, KUTOVA, OBLIKA I POLOŽAJA KOD ZAVARENIH KONSTRUKCIJA PREMA HRN EN ISO 13920
Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2020. urn:nbn:hr:153:840896
Lubina, Vlatka
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod

Institutional repository: Repository of Mechanical Engineering in Slavonski Brod

Cite this document

Lubina, V. (2020). TOLERNACIJE DULJINA, KUTOVA, OBLIKA I POLOŽAJA KOD ZAVARENIH KONSTRUKCIJA PREMA HRN EN ISO 13920 (Master's thesis). Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:840896

Lubina, Vlatka. "TOLERNACIJE DULJINA, KUTOVA, OBLIKA I POLOŽAJA KOD ZAVARENIH KONSTRUKCIJA PREMA HRN EN ISO 13920." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2020. https://urn.nsk.hr/urn:nbn:hr:153:840896

Lubina, Vlatka. "TOLERNACIJE DULJINA, KUTOVA, OBLIKA I POLOŽAJA KOD ZAVARENIH KONSTRUKCIJA PREMA HRN EN ISO 13920." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2020. https://urn.nsk.hr/urn:nbn:hr:153:840896

Lubina, V. (2020). 'TOLERNACIJE DULJINA, KUTOVA, OBLIKA I POLOŽAJA KOD ZAVARENIH KONSTRUKCIJA PREMA HRN EN ISO 13920', Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 29 May 2024, https://urn.nsk.hr/urn:nbn:hr:153:840896

Lubina V. TOLERNACIJE DULJINA, KUTOVA, OBLIKA I POLOŽAJA KOD ZAVARENIH KONSTRUKCIJA PREMA HRN EN ISO 13920 [Master's thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2020 [cited 2024 May 29] Available at: https://urn.nsk.hr/urn:nbn:hr:153:840896

V. Lubina, "TOLERNACIJE DULJINA, KUTOVA, OBLIKA I POLOŽAJA KOD ZAVARENIH KONSTRUKCIJA PREMA HRN EN ISO 13920", Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2020. Available at: https://urn.nsk.hr/urn:nbn:hr:153:840896

Metadata
TitleTOLERNACIJE DULJINA, KUTOVA, OBLIKA I POLOŽAJA KOD ZAVARENIH KONSTRUKCIJA PREMA HRN EN ISO 13920
Title (english)TOLERANCES FOR LENGTHS, ANGLES, SHAPE AND POSITIONS FOR ERLDED CONSTRUCTIONS ACCORDING TO HRN EN ISO 13920
AuthorVlatka Lubina
MentorIvan Samardžić (mentor)
Committee memberIvan Samardžić (član povjerenstva)
Committee memberLeon Maglić (predsjednik povjerenstva)
Committee memberDaniel Novoselović (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Slavonski Brod
Defense date and country2020-07-23, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Diplomski rad je utemeljen na raspoloživoj literaturi. Sadrži opis kontrole i osiguranja kvalitete zavara i zavarenih konstrukcija, metoda kontrole kvalitete bez razaranja, metoda kontrole kvalitete s razaranjem, općih tolerancija za zavarenu konstrukciju te karakteristika mjerne i kontrolne opreme. Poseban naglasak stavljen je na tolerancije duljina, kutova, oblika i položaja kod zavarenih konstrukcija prema normi HRN EN ISO 13920. Objašnjeni su uređaji koji se koriste za ispitivanje i mjerenje tolerancija, definirani su postupci mjerenja pravocrtnosti, ravnosti i paralelnosti te su dane vrijednosti raspona nazivnih veličina za tolerancije duljinskih izmjera, tolerancije kutnih izmjera i za tolerancije pravocrtnosti, ravnosti i paralelnosti. Također je detaljno objašnjena primjena mehaničkih uređaja za kontrolu i mjerenje duljina i kutova.
Abstract (english)
The paper is based upon the available literature. It consists of the description of the control and quality assurance of welds and welded constructions, non-destructive quality control methods, destructive quality control methods, general tolerances for welded constructions and the characteristics of measuring and control equipment. Special emphasis is placed upon tolerances for lengths, angles, shape and position for welded constructions according to the HRN EN ISO 13920 standard. Devices used for testing and measuring tolerances are explained, the procedures for measuring straightness, flatness and parallelism are defined and the range of nominal sizes for tolerances for linear dimensions, tolerances for angular dimensions and straightness, flatness and parallelism tolerances are listed as well. The application of the mechanical devices for control and measurement of lengths and angles is also explained in detail.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:840896
Study programmeTitle: Graduate Study Mechanical Engineering; specializations in: Design and Product Development, Manufacturing Logistics, Materials Engineering, Engineering Technologies, Power Engineering
Course: Design and Product Development
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2020-09-09 09:35:38