prikaz prve stranice dokumenta NAVARIVANJE KOTAČA ŽELJEZNIČKIH VAGONA
Access restricted to students and staff of home institution
master's thesis
NAVARIVANJE KOTAČA ŽELJEZNIČKIH VAGONA
Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2020. urn:nbn:hr:153:485512
Vincent, Luka
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod

Institutional repository: Repository of Mechanical Engineering in Slavonski Brod

Cite this document

Vincent, L. (2020). NAVARIVANJE KOTAČA ŽELJEZNIČKIH VAGONA (Master's thesis). Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:485512

Vincent, Luka. "NAVARIVANJE KOTAČA ŽELJEZNIČKIH VAGONA." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2020. https://urn.nsk.hr/urn:nbn:hr:153:485512

Vincent, Luka. "NAVARIVANJE KOTAČA ŽELJEZNIČKIH VAGONA." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2020. https://urn.nsk.hr/urn:nbn:hr:153:485512

Vincent, L. (2020). 'NAVARIVANJE KOTAČA ŽELJEZNIČKIH VAGONA', Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 28 December 2024, https://urn.nsk.hr/urn:nbn:hr:153:485512

Vincent L. NAVARIVANJE KOTAČA ŽELJEZNIČKIH VAGONA [Master's thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2020 [cited 2024 December 28] Available at: https://urn.nsk.hr/urn:nbn:hr:153:485512

L. Vincent, "NAVARIVANJE KOTAČA ŽELJEZNIČKIH VAGONA", Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2020. Available at: https://urn.nsk.hr/urn:nbn:hr:153:485512

Metadata
TitleNAVARIVANJE KOTAČA ŽELJEZNIČKIH VAGONA
Title (english)OVERLAY WELDING OF WHEELS FOR RAILWAY WAGONS
AuthorLuka Vincent
MentorIvan Samardžić (mentor)
Committee memberIvan Samardžić (član povjerenstva)
Committee memberLeon Maglić (predsjednik povjerenstva)
Committee memberVlatko Marušić (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Slavonski Brod
Defense date and country2020-07-23, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U radu je opisan postupak navarivanja kotača željezničkih vagona. Postupak se primjenjuje radi toga što se kretanjem vozila po tračnicama dolazi do trošenja naplatka kotača željezničkih vozila. U uvodu su opisani tipovi kotača koji se pojavljuju u primjeni. Opisan je slijed aktivnosti koje se provode tijekom navarivanja kotača, isto kao i kontrola kvalitete. Navedeni su primjeri WPS i WPQR dokumenata, što oni moraju sadržavati i kako izgledaju. Opisana je tehnologija elektrolučnog postupka zavarivanja pod praškom i ostale pripremne aktivnosti koje je potrebno ostvariti prije početka procesa navarivanja. Navedene su metode kontrole kvalitete bez razaranja koje se koriste tijekom i nakon procesa zavarivanja. Svaka od tih metoda ukratko je opisana i shematski prikazana. Greške koje se pojave tijekom postupka potrebno je popraviti odgovarajućim postupcima, da ne bi došlo do neželjenih događaja tijekom eksploatacije koje mogu imati ljudske žrtve i materijalne štete.
Abstract (english)
In thesis overlay welding of wheels for railway wagons are briefly described. The procedure is applied because the movement of the vehicle on the rails leads to the wear of the rims of the wheels for railway vehicles. The introduction describes the types of wheels that appear in the application. The sequence of activities carried out during overlay welding are described, as is the quality control. Examples of WPS and WPQR documents are given, what they must contain and what they look like. The technology of submerged arc welding and other preparatory activities that need to be accomplished before the start of the welding process are described. The non-destructive quality control methods used during and after the welding process are listed. Each of these methods are briefly described and schematically illustrated. Failures that occur during the procedure must be corrected by appropriate procedures, in order to avoid unwanted events during exploitation that may have human casualties and material damage.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:485512
Study programmeTitle: Graduate Study Mechanical Engineering; specializations in: Design and Product Development, Manufacturing Logistics, Materials Engineering, Engineering Technologies, Power Engineering
Course: Design and Product Development
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2020-09-09 11:25:02