prikaz prve stranice dokumenta MEHANIČKA SVOJSTVA I PROIZVODNJA IMPLANTATA ADITIVNIM POSTUPCIMA
Access restricted to students and staff of home institution
master's thesis
MEHANIČKA SVOJSTVA I PROIZVODNJA IMPLANTATA ADITIVNIM POSTUPCIMA
Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2020. urn:nbn:hr:153:041621
Vuković, Mihael
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod

Institutional repository: Repository of Mechanical Engineering in Slavonski Brod

Cite this document

Vuković, M. (2020). MEHANIČKA SVOJSTVA I PROIZVODNJA IMPLANTATA ADITIVNIM POSTUPCIMA (Master's thesis). Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:041621

Vuković, Mihael. "MEHANIČKA SVOJSTVA I PROIZVODNJA IMPLANTATA ADITIVNIM POSTUPCIMA." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2020. https://urn.nsk.hr/urn:nbn:hr:153:041621

Vuković, Mihael. "MEHANIČKA SVOJSTVA I PROIZVODNJA IMPLANTATA ADITIVNIM POSTUPCIMA." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2020. https://urn.nsk.hr/urn:nbn:hr:153:041621

Vuković, M. (2020). 'MEHANIČKA SVOJSTVA I PROIZVODNJA IMPLANTATA ADITIVNIM POSTUPCIMA', Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 01 December 2024, https://urn.nsk.hr/urn:nbn:hr:153:041621

Vuković M. MEHANIČKA SVOJSTVA I PROIZVODNJA IMPLANTATA ADITIVNIM POSTUPCIMA [Master's thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2020 [cited 2024 December 01] Available at: https://urn.nsk.hr/urn:nbn:hr:153:041621

M. Vuković, "MEHANIČKA SVOJSTVA I PROIZVODNJA IMPLANTATA ADITIVNIM POSTUPCIMA", Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2020. Available at: https://urn.nsk.hr/urn:nbn:hr:153:041621

Metadata
TitleMEHANIČKA SVOJSTVA I PROIZVODNJA IMPLANTATA ADITIVNIM POSTUPCIMA
Title (english)MECHANICAL PROPERTIES AND PRODUCTION OF IMPLANTS BY ADDITIVE MANUFACTURING
AuthorMihael Vuković
MentorJosip Stojšić (mentor)
Committee memberJosip Stojšić (član povjerenstva)
Committee memberAndrijana Milinović (predsjednik povjerenstva)
Committee memberDaniel Novoselović (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Slavonski Brod
Defense date and country2020-09-11, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U radu se opisuju aditivne tehnologije i njihovo korištenje prilikom izrade implantata. Na početku se opisuje osnovni princip aditivnih tehnologija. Opisani su biomaterijali i zašto je bitna njihova biokompatibilnost za implantate. Za izradu implantata se koriste metali, keramike, kompozitni materijali i nanokompoziti. Opisana je njihova primjena za izradu implantata. Pored mehaničkih svojstava implantata važna je njihova biokompatibilnost s ljudskim tkivima i prihvaćanje od strane organizma. Nadalje, u radu su objašnjene najčešće korištene aditivne tehnologije za izradu implantata i prikazani su neki primjeri koji se izrađuju za komercijalne svrhe.
Abstract (english)
The paper describes additive technologies and their use in the manufacturing of implants. At the beginning, the basic principle of additive technologies is described. Additive technologies are used to make various products from different materials. Biomaterials are also described and why their biocompatibility is important for implants. Metals, ceramics, composite materials and nanocomposites are used to make the implants. Their application for the manufacturing of implants is described. Except to the mechanical properties of implants, their biocompatibility with human tissues and acceptance by the organism are also important. Furthermore, the thesis explains the most commonly used additive technologies for production of the implants and presents some examples that are made for commercial purposes.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:041621
Study programmeTitle: Graduate Study Mechanical Engineering; specializations in: Design and Product Development, Manufacturing Logistics, Materials Engineering, Engineering Technologies, Power Engineering
Course: Engineering Technologies
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2020-09-15 09:16:58