prikaz prve stranice dokumenta RAČUNALOM PODRŽANO PROJEKTIRANJE TEHNOLOŠKOG PROCESA ZA IZRADU SKLOPA ZUPČANIKA S KOSIM HELIKOIDNIM ZUBIMA
Access restricted to students and staff of home institution
master's thesis
RAČUNALOM PODRŽANO PROJEKTIRANJE TEHNOLOŠKOG PROCESA ZA IZRADU SKLOPA ZUPČANIKA S KOSIM HELIKOIDNIM ZUBIMA
Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2020. urn:nbn:hr:153:743690
Brezić, Tomislav
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod

Institutional repository: Repository of Mechanical Engineering in Slavonski Brod

Cite this document

Brezić, T. (2020). RAČUNALOM PODRŽANO PROJEKTIRANJE TEHNOLOŠKOG PROCESA ZA IZRADU SKLOPA ZUPČANIKA S KOSIM HELIKOIDNIM ZUBIMA (Master's thesis). Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:743690

Brezić, Tomislav. "RAČUNALOM PODRŽANO PROJEKTIRANJE TEHNOLOŠKOG PROCESA ZA IZRADU SKLOPA ZUPČANIKA S KOSIM HELIKOIDNIM ZUBIMA." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2020. https://urn.nsk.hr/urn:nbn:hr:153:743690

Brezić, Tomislav. "RAČUNALOM PODRŽANO PROJEKTIRANJE TEHNOLOŠKOG PROCESA ZA IZRADU SKLOPA ZUPČANIKA S KOSIM HELIKOIDNIM ZUBIMA." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2020. https://urn.nsk.hr/urn:nbn:hr:153:743690

Brezić, T. (2020). 'RAČUNALOM PODRŽANO PROJEKTIRANJE TEHNOLOŠKOG PROCESA ZA IZRADU SKLOPA ZUPČANIKA S KOSIM HELIKOIDNIM ZUBIMA', Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 27 November 2024, https://urn.nsk.hr/urn:nbn:hr:153:743690

Brezić T. RAČUNALOM PODRŽANO PROJEKTIRANJE TEHNOLOŠKOG PROCESA ZA IZRADU SKLOPA ZUPČANIKA S KOSIM HELIKOIDNIM ZUBIMA [Master's thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2020 [cited 2024 November 27] Available at: https://urn.nsk.hr/urn:nbn:hr:153:743690

T. Brezić, "RAČUNALOM PODRŽANO PROJEKTIRANJE TEHNOLOŠKOG PROCESA ZA IZRADU SKLOPA ZUPČANIKA S KOSIM HELIKOIDNIM ZUBIMA", Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2020. Available at: https://urn.nsk.hr/urn:nbn:hr:153:743690

Metadata
TitleRAČUNALOM PODRŽANO PROJEKTIRANJE TEHNOLOŠKOG PROCESA ZA IZRADU SKLOPA ZUPČANIKA S KOSIM HELIKOIDNIM ZUBIMA
Title (english)COMPUTER-AIDED PROCESS PLANNING FOR MACHINING THE ASSEMBLY OF GEAR WITH HELICAL TEETH
AuthorTomislav Brezić
MentorIlija Svalina (mentor)
Committee memberIlija Svalina (član povjerenstva)
Committee memberRoberto Lujić (predsjednik povjerenstva)
Committee memberTomislav Šarić (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Slavonski Brod
Defense date and country2020-09-11, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Tema diplomskog rada je projektiranje tehnoloških procesa u CAD/CAM sustavu. Na početku je opisana razlika između troosnih i višeosnih obradnih sustava. Prikazane su njihove prednosti kao i nedostaci. U eksperimentalnom dijelu predstavljen je rad sa Siemensovim programskim paketom NX 12 na projektiranju tehnološkog procesa za izradu helikoidnog zupčastog sklopa. Koristeći troosno i višeosno okruženje softvera prikazana je izrada tehnološkog procesa na dva načina. Oba načina su detaljno objašnjena, te je za oba pristupa generirana putanja alata i prikazana simulacija obrade. Pomoću navedenog softvera, uspoređeno je vrijeme potrebno za izradu troosnim i višeosnim obradnim sustavima. Na kraju je opisan postupak izrade tehnološke dokumentacije koja je generirana za oba pristupa izrade zadanog sklopa.
Abstract (english)
The theme of the Master's degree thesis is the design of technological processes in the CAD / CAM software. At the beginning, the difference between the three axis and multi axis processing systems is described. In the experimental part of the Master's degree thesis the work with the Siemens program package NX 12 on the design of the technological process for making the helical gear assembly is presented. Using the three axis and multi axis environment of the software, the creating of a technological process is presented in two ways. Both ways are explained in detail, and for each approach the tool paths are generated and the simulation of process is displayed. With the help of the above mentioned software, the time needed to create process using three axis and multi axis systems was compared, Finally, the process of producing the technological documentation that is generated for both approaches to the production of the given assembly is described.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:743690
Study programmeTitle: Graduate Study Mechanical Engineering; specializations in: Design and Product Development, Manufacturing Logistics, Materials Engineering, Engineering Technologies, Power Engineering
Course: Manufacturing Logistics
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2020-09-17 12:18:05