prikaz prve stranice dokumenta IZRADA TEHNOLOŠKOG POSTUPKA OBRADE POMOĆU CAD/CAM SUSTAVA
Access restricted to students and staff of home institution
master's thesis
IZRADA TEHNOLOŠKOG POSTUPKA OBRADE POMOĆU CAD/CAM SUSTAVA
Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2020. urn:nbn:hr:153:044973
Trakoštanec, Marko
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod

Institutional repository: Repository of Mechanical Engineering in Slavonski Brod

Cite this document

Trakoštanec, M. (2020). IZRADA TEHNOLOŠKOG POSTUPKA OBRADE POMOĆU CAD/CAM SUSTAVA (Master's thesis). Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:044973

Trakoštanec, Marko. "IZRADA TEHNOLOŠKOG POSTUPKA OBRADE POMOĆU CAD/CAM SUSTAVA." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2020. https://urn.nsk.hr/urn:nbn:hr:153:044973

Trakoštanec, Marko. "IZRADA TEHNOLOŠKOG POSTUPKA OBRADE POMOĆU CAD/CAM SUSTAVA." Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2020. https://urn.nsk.hr/urn:nbn:hr:153:044973

Trakoštanec, M. (2020). 'IZRADA TEHNOLOŠKOG POSTUPKA OBRADE POMOĆU CAD/CAM SUSTAVA', Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 26 December 2024, https://urn.nsk.hr/urn:nbn:hr:153:044973

Trakoštanec M. IZRADA TEHNOLOŠKOG POSTUPKA OBRADE POMOĆU CAD/CAM SUSTAVA [Master's thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2020 [cited 2024 December 26] Available at: https://urn.nsk.hr/urn:nbn:hr:153:044973

M. Trakoštanec, "IZRADA TEHNOLOŠKOG POSTUPKA OBRADE POMOĆU CAD/CAM SUSTAVA", Master's thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2020. Available at: https://urn.nsk.hr/urn:nbn:hr:153:044973

Metadata
TitleIZRADA TEHNOLOŠKOG POSTUPKA OBRADE POMOĆU CAD/CAM SUSTAVA
Title (english)Making of production procedure with using CAD/CAM systems
AuthorMarko Trakoštanec
MentorAntun Stoić (mentor)
Committee memberAntun Stoić (član povjerenstva)
Committee memberMiroslav Duspara (predsjednik povjerenstva)
Committee memberJosip Cumin (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Slavonski Brod
Defense date and country2020-09-11, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovom diplomskom radu objašnjen je postupak izrade tehnološkog postupka kod izrade proizvoda postupcima obrade odvajanja čestica prema zadanom crtežu. Prikazan je postupak odabira polaznog materijala prema zadanom materijalu s crteža, izrađen je proračun adekvatnih brzina rezanja za strojnu obradu prema tehnološkim specifičnostima s odabranim alatima za obradu. U praktičnom dijelu rada prikazan je postupak modeliranja zadanog proizvoda u programskom alatu QAPT 2018 te su definirani tehnološki postupci obrade.
Abstract (english)
In this diploma thesis, the procedure of making the technological procedure in the products, the procedures of processing the separation of particles according to the given drawing is explained. The procedure for selecting the starting material according to the given material from the drawing, the calculation of adequate cutting speeds for machining according to the selected processing tools is presented. In the practical of the paper, the procedure of modeling a given product in the software tool QAPT 2018 is presented, and the technological processsing procedures are defined.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:044973
Study programmeTitle: Graduate Study Mechanical Engineering; specializations in: Design and Product Development, Manufacturing Logistics, Materials Engineering, Engineering Technologies, Power Engineering
Course: Engineering Technologies
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2020-09-17 12:31:35