prikaz prve stranice dokumenta Strojevi za obradu bušenjem
Access restricted to students and staff of home institution
undergraduate thesis
Strojevi za obradu bušenjem
Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2020. urn:nbn:hr:153:421021
Lucić, Kristijan
Josip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod

Institutional repository: Repository of Mechanical Engineering in Slavonski Brod

Cite this document

Lucić, K. (2020). Strojevi za obradu bušenjem (Undergraduate thesis). Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:153:421021

Lucić, Kristijan. "Strojevi za obradu bušenjem." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2020. https://urn.nsk.hr/urn:nbn:hr:153:421021

Lucić, Kristijan. "Strojevi za obradu bušenjem." Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, 2020. https://urn.nsk.hr/urn:nbn:hr:153:421021

Lucić, K. (2020). 'Strojevi za obradu bušenjem', Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, accessed 30 August 2024, https://urn.nsk.hr/urn:nbn:hr:153:421021

Lucić K. Strojevi za obradu bušenjem [Undergraduate thesis]. Slavonski Brod: Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod; 2020 [cited 2024 August 30] Available at: https://urn.nsk.hr/urn:nbn:hr:153:421021

K. Lucić, "Strojevi za obradu bušenjem", Undergraduate thesis, Josip Juraj Strossmayer University of Osijek, Mechanical Engineering Faculty in Slavonski Brod, Slavonski Brod, 2020. Available at: https://urn.nsk.hr/urn:nbn:hr:153:421021

Metadata
TitleStrojevi za obradu bušenjem
Title (english)Drilling machines
AuthorKristijan Lucić
MentorAntun Stoić (mentor)
Committee memberAntun Stoić (član povjerenstva)
Committee memberMiroslav Duspara (član povjerenstva)
Committee memberJosip Cumin (član povjerenstva)
GranterJosip Juraj Strossmayer University of Osijek
Mechanical Engineering Faculty in Slavonski Brod
Slavonski Brod
Defense date and country2020-09-11, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U radu se kroz nekoliko poglavlja opisuju postupci obrade bušenjem bez eksperimentalnih ispitivanja. U nastavku su opisane geometrijske značajke površine dobivenim pojedinim postupkom bušenja, kvaliteta površine, rezni alati, te izvedbe bušilica. U prvom poglavlju (uvodu) dane su osnovne postavke postupka bušenja. Prikazana je podjela postupaka obrade bušenjem. U drugom poglavlju opisane se pojedine izvedbe bušilica, te njihove prednosti i nedostatci. U trećem poglavlju opisane se tehnološke značajke pojedinih strojeva za obradu bušenjem i uz njih su objašnjeni parametri koji utječu na odabir stroja. Pod četvrtim poglavljem su prikazani rezni alati, njihova geometrija i materijali. Objašnjeno je gdje se svaki alat koristi u obradi bušenjem, te koje naprave služe za prihvat i stezanje obradaka.
Abstract (english)
In several chapters this work describes the processing methods by turning without experimental testing. The discontinuity is described by the geometrical properties of the surface obtained by a particular drilling procedure, surface quality, cutting tools and drilling performance. In the first chapter, a general introduction to drilling is described. The division of drilling operations is shown. In the second chapter, each drilling performance is described and their advantages and disadvantages. The third chapter describes the technological features of individual drilling machines and the parameters that affect the selection of the machine are explained. The fourth chapter presents cutting tools, their geometry and materials. It is explained where each tool is used for drilling and which tools are used for receiving and clamping the workpiece.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:153:421021
Study programmeTitle: Undergraduate Study in Mechanical Engineering
Study programme type: university
Study level: undergraduate
Academic / professional title: sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (sveučilišni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2020-10-07 10:19:36