prikaz prve stranice dokumenta Assessment of the Impact of the Addition of Nanoparticles on the Properties of Glass–Ionomer Cements
  Download
PDF 6.16 MB
Scientific paper - Original scientific paper
Assessment of the Impact of the Addition of Nanoparticles on the Properties of Glass–Ionomer Cements
Materials, 13 (2020), 2; 276. https://doi.org/10.3390/ma13020276
Gjorgievska, Elizabeta; Nicholson, John W.; Gabrić, Dragana; Guclu, Zeynep Asli; Miletić, Ivana; Coleman, Nichola J.

Institutional repository: University of Zagreb School of Dental Medicine Repository

Cite this document

Gjorgievska, E., Nicholson, J. W., Gabrić, D., Guclu, Z. A., Miletić, I. & Coleman, N. J. (2020). Assessment of the Impact of the Addition of Nanoparticles on the Properties of Glass–Ionomer Cements. Materials, 13. (2). doi: 10.3390/ma13020276

Gjorgievska, Elizabeta, et al. "Assessment of the Impact of the Addition of Nanoparticles on the Properties of Glass–Ionomer Cements." Materials, vol. 13, no. 2, 2020. https://doi.org/10.3390/ma13020276

Gjorgievska, Elizabeta, John W. Nicholson, Dragana Gabrić, Zeynep Asli Guclu, Ivana Miletić and Nichola J. Coleman. "Assessment of the Impact of the Addition of Nanoparticles on the Properties of Glass–Ionomer Cements." Materials 13, no. 2 (2020). https://doi.org/10.3390/ma13020276

Gjorgievska, E., et al. (2020) 'Assessment of the Impact of the Addition of Nanoparticles on the Properties of Glass–Ionomer Cements', Materials, 13(2). doi: 10.3390/ma13020276

Gjorgievska E, Nicholson JW, Gabrić D, Guclu ZA, Miletić I, Coleman NJ. Assessment of the Impact of the Addition of Nanoparticles on the Properties of Glass–Ionomer Cements. Materials [Internet]. 2020 January 08 [cited 2024 December 26];13(2). doi: 10.3390/ma13020276

E. Gjorgievska, J. W. Nicholson, D. Gabrić, Z. A. Guclu, I. Miletić and N. J. Coleman, "Assessment of the Impact of the Addition of Nanoparticles on the Properties of Glass–Ionomer Cements", Materials, vol. 13, no. 2, January 2020. [Online]. Available at: https://urn.nsk.hr/urn:nbn:hr:127:258088. [Accessed: 26 December 2024]

Metadata
Title (english)Assessment of the Impact of the Addition of Nanoparticles on the Properties of Glass–Ionomer Cements
AuthorElizabeta Gjorgievska
AuthorJohn W. Nicholson
AuthorDragana Gabrić
AuthorZeynep Asli Guclu
AuthorIvana Miletić
AuthorNichola J. Coleman
Author's institution(Zagreb University Hispital Center)
Author's institutionUniversity of Zagreb
School of Dental Medicine
Scientific / art field,
discipline and subdiscipline		BIOMEDICINE AND HEALTHCARE
Dental Medicine
Abstract (english)
The aim of the study was to evaluate the effects of incorporation of Al2O3, ZrO2 and TiO2 nanoparticles into glass–ionomer cements (GICs). Two different GICs were used in the study. Four groups were prepared for each material: the control group (without nanoparticles) and three groups modified by the incorporation of nanoparticles at 2, 5 or 10 wt %, respectively. Cements were mixed and placed in moulds (4 mm × 6 mm); after setting, the samples were stored in saline (one day and one week). Compressive strengths were measured and the morphology of the fractured surfaces was analyzed by scanning electron microscopy. The elements released into the storage solutions were determined by Inductively coupled plasma-optical emission spectrometry (ICP-OES). Addition of nanoparticles was found to alter the appearance of cements as examined by scanning electron microscopy. Compressive strength increased with the addition of ZrO2 and especially TiO2 nanoparticles, whereas the addition of Al2O3 nanoparticles generally weakened the cements. The ion release profile of the modified cements was the same in all cases. The addition of Al2O3, ZrO2 and TiO2 nanoparticles into GICs is beneficial, since it leads to reduction of the microscopic voids in the set cement. Of these, the use of ZrO2 and TiO2 nanoparticles also led to increased compressive strength. Nanoparticles did not release detectable levels of ions (Al, Zr or Ti), which makes them suitable for clinical use.
Keywords (english)
Languageenglish
Publication typeScientific paper - Original scientific paper
Publication statusPublished
Peer reviewPeer review - international
Publication versionPublished version
Journal titleMaterials
Numberingvol. 13, no. 2, 276
e-ISSN1996-1944
DOIhttps://doi.org/10.3390/ma13020276
URN:NBNurn:nbn:hr:127:258088
Publication2020-01-08
Document URLhttps://www.mdpi.com/1996-1944/13/2/276
Type of resourceText
Access conditionsOpen access
Terms of useLicence Attribution 4.0 International (CC BY 4.0) icon
Created on2022-11-11 10:10:13