prikaz prve stranice dokumenta Uporaba 3D ispisa pri izradi metalnih osnova mobilnih protetskih radova
  Download
PDF 626.5 KB
master's thesis
Uporaba 3D ispisa pri izradi metalnih osnova mobilnih protetskih radova
Zagreb: University of Zagreb, School of Dental Medicine, 2020. urn:nbn:hr:127:238217
Ostojčić, Josipa
University of Zagreb
School of Dental Medicine
Department of Removable Prosthodontics

Institutional repository: University of Zagreb School of Dental Medicine Repository

Cite this document

Ostojčić, J. (2020). Uporaba 3D ispisa pri izradi metalnih osnova mobilnih protetskih radova (Master's thesis). Zagreb: University of Zagreb, School of Dental Medicine. Retrieved from https://urn.nsk.hr/urn:nbn:hr:127:238217

Ostojčić, Josipa. "Uporaba 3D ispisa pri izradi metalnih osnova mobilnih protetskih radova." Master's thesis, University of Zagreb, School of Dental Medicine, 2020. https://urn.nsk.hr/urn:nbn:hr:127:238217

Ostojčić, Josipa. "Uporaba 3D ispisa pri izradi metalnih osnova mobilnih protetskih radova." Master's thesis, University of Zagreb, School of Dental Medicine, 2020. https://urn.nsk.hr/urn:nbn:hr:127:238217

Ostojčić, J. (2020). 'Uporaba 3D ispisa pri izradi metalnih osnova mobilnih protetskih radova', Master's thesis, University of Zagreb, School of Dental Medicine, accessed 13 May 2024, https://urn.nsk.hr/urn:nbn:hr:127:238217

Ostojčić J. Uporaba 3D ispisa pri izradi metalnih osnova mobilnih protetskih radova [Master's thesis]. Zagreb: University of Zagreb, School of Dental Medicine; 2020 [cited 2024 May 13] Available at: https://urn.nsk.hr/urn:nbn:hr:127:238217

J. Ostojčić, "Uporaba 3D ispisa pri izradi metalnih osnova mobilnih protetskih radova", Master's thesis, University of Zagreb, School of Dental Medicine, Zagreb, 2020. Available at: https://urn.nsk.hr/urn:nbn:hr:127:238217

Metadata
TitleUporaba 3D ispisa pri izradi metalnih osnova mobilnih protetskih radova
Title (english)Use of 3D printing in the fabrication of metal frameworks of removable restorations
AuthorJosipa Ostojčić
MentorNikša Dulčić (mentor)
Committee memberNikša Dulčić (predsjednik povjerenstva)
Committee memberDavor Illeš (član povjerenstva)
Committee memberLana Bergman (član povjerenstva)
GranterUniversity of Zagreb
School of Dental Medicine
(Department of Removable Prosthodontics)
Zagreb
Defense date and country2020-09-03, Croatia
Scientific / art field,
discipline and subdiscipline		BIOMEDICINE AND HEALTHCARE
Dental Medicine
Abstract
Iako se preventiva u dentalnoj medicini i životni standard poboljšavaju s godinama, i dalje postoji velika potreba za protetskom rehabilitacijom. U cilju olakšanja i ubrzanja procesa izrade koja uključuje brojne korake, razvile su se digitalne metode izrade protetskih radova. Protetski se radovi već godinama uspješno izrađuju glodanjem blokova materijala, dok 3D ispis posljednjih godina postaje sve zastupljenija metoda izbora, osobito pri izradi metalnih i polimernih radova. 3D ispisom nastoji se postići ušteda materijala jer tehnikom slojevanja točnih obrisa protetskog rada ne dolazi do suvišne potrošnje materijala za razliku od metode glodanja koja ima veliki utrošak neiskorištenog materijala preostalog frezanjem blokova. Ušteda materijala, klinički zadovoljavajuća preciznost i povećana produktivnost svrstavaju 3D ispis među konkurentne metode pri odabiru načina izrade. Aditivne tehnike izrade u širem smislu dijele se na one kojima se obrađuju polimerni materijali, kao što su stereolitografija, digitalna svjetlosna obrada i fuzijsko depozicijsko modeliranje te tehnike laserskog taljenja kojima se obrađuju metalni materijali. Metalne osnove mobilnih protetskih radova vrlo se jednostavno i uspješno izrađuju metodom laserskog taljenja, čime je komplicirana izrada složene metalne osnove djelomičnih proteza svedena na što jednostavniji proces. Iako razvijen i primjenjiv u kliničkom radu, 3D ispis pokazuje određene nedostatke koji zahtijevaju završnu konvencionalnu obradu protetskih radova, ali se očekuje da će brzi razvoj metoda i materijala u sljedećim godinama naći rješenje za te prepreke.
Abstract (english)
Although prevention in dentistry and standard of living improve over time, there is still a great need for prosthetic rehabilitation. In order to facilitate and speed up the process of fabrication, which includes many different steps, digital methods of prosthetic restorations fabrication have been developed. Prosthetic restorations have been successfully fabricated by milling blocks of materials for years, while 3D printing has become an increasingly common method of choice in recent years, especially in the fabrication of metal and polymer restorations. 3D printing aims to achieve material savings, since the technique of layering the exact contours of prosthetic restorations does not require excessive material consumption, unlike the milling method, which leaves considerable amounts of unused material after milling of blocks. Material savings, clinically satisfactory precision and increased productivity place 3D printing among competitive methods when choosing a method of fabrication. Additive fabrication techniques in a broader sense are divided into the ones used for processing polymers, e.g. stereolithography, digital light processing and fused deposition modeling, as well as laser melting techniques, which are used with metals. Metal frameworks of removable prosthetic restorations are fabricated by laser melting in a very simple and successful way, which reduces the complicated process of metal framework fabrication to a more simple process.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:127:238217
Study programmeTitle: dental medicine
Study programme type: university
Study level: integrated undergraduate and graduate
Academic / professional title: doktor/doktorica dentalne medicine (doktor/doktorica dentalne medicine)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence Attribution-NonCommercial 4.0 International (CC BY-NC 4.0) icon
Created on2021-01-18 12:55:27