prikaz prve stranice dokumenta Microstructural analysis of cold drawn CuAlMn shape memory alloy wire
  Download
PDF 1.11 MB
Scientific paper - Original scientific paper
Microstructural analysis of cold drawn CuAlMn shape memory alloy wire
In: Proceedings book 18th International Foundrymen Conference. / Dolić, Natalija; Zovko Brodarac, Zdenka; Begić Hadžipašić, Anita (Ed.). Sisak: University of Zagreb Faculty of Metallurgy, 2019. pp. 237-246. urn:nbn:hr:115:904720
Ivanić, Ivana; Kožuh, Stjepan; Pavičić, Nikolina; Čubela, Dijana; Beganović, Omer; Kosec, Borut; Gojić, Mirko

Institutional repository: Repository of Faculty of Metallurgy University of Zagreb

Cite this document

Ivanić, I., Kožuh, S., Pavičić, N., Čubela, D., Beganović, O., Kosec, B. & Gojić, M. (2019). Microstructural analysis of cold drawn CuAlMn shape memory alloy wire. In N. Dolić, (Ed.), Z. Zovko Brodarac, (Ed.), A. Begić Hadžipašić, (Ed.), Proceedings book 18th International Foundrymen Conference (pp. 237-246). Sisak: University of Zagreb Faculty of Metallurgy. Retrieved from https://urn.nsk.hr/urn:nbn:hr:115:904720

Ivanić, Ivana, et al. "Microstructural analysis of cold drawn CuAlMn shape memory alloy wire." Proceedings book 18th International Foundrymen Conference, edited by Natalija Dolić, edited by Zdenka Zovko Brodarac, edited by Anita Begić Hadžipašić, University of Zagreb Faculty of Metallurgy, 2019, pp. 237-246. https://urn.nsk.hr/urn:nbn:hr:115:904720

Ivanić, Ivana, Stjepan Kožuh, Nikolina Pavičić, Dijana Čubela, Omer Beganović, Borut Kosec and Mirko Gojić. "Microstructural analysis of cold drawn CuAlMn shape memory alloy wire." In Proceedings book 18th International Foundrymen Conference, 237-246. Sisak: University of Zagreb Faculty of Metallurgy, 2019. Accessed 2024 November 26. https://urn.nsk.hr/urn:nbn:hr:115:904720

Ivanić, I., et al. (2019) 'Microstructural analysis of cold drawn CuAlMn shape memory alloy wire', in Dolić, N. (ed.), Zovko Brodarac, Z. (ed.), Begić Hadžipašić, A. (ed.), Proceedings book 18th International Foundrymen Conference, University of Zagreb Faculty of Metallurgy, Sisak, pp. 237-246. Available at: https://urn.nsk.hr/urn:nbn:hr:115:904720 (Accessed 26 November 2024)

Ivanić I, Kožuh S, Pavičić N, Čubela D, Beganović O, Kosec B, and sur.. Microstructural analysis of cold drawn CuAlMn shape memory alloy wire. In: N. Dolić, ed., Z. Zovko Brodarac, ed., A. Begić Hadžipašić, ed. Proceedings book 18th International Foundrymen Conference. Sisak: University of Zagreb Faculty of Metallurgy; 2019. Pp. 237-246. [cited 2024 November 26] Available at: https://urn.nsk.hr/urn:nbn:hr:115:904720

I. Ivanić, et al., "Microstructural analysis of cold drawn CuAlMn shape memory alloy wire", Proceedings book 18th International Foundrymen Conference, N. Dolić, Z. Zovko Brodarac and A. Begić Hadžipašić, Eds. Sisak: University of Zagreb Faculty of Metallurgy, 2019. [Online] Available at: https://urn.nsk.hr/urn:nbn:hr:115:904720 [Accessed: 26 November 2024]

Metadata
Title (english)Microstructural analysis of cold drawn CuAlMn shape memory alloy wire
AuthorIvana Ivanić
AuthorStjepan Kožuh
AuthorNikolina Pavičić
AuthorDijana Čubela
AuthorOmer Beganović
AuthorBorut Kosec
AuthorMirko Gojić
EditorNatalija Dolić
EditorZdenka Zovko Brodarac
EditorAnita Begić Hadžipašić
Author's institutionUniversity of Zagreb
Faculty of Metallurgy
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Metallurgy
Abstract (english)
The Cu-11.9Al-2.5Mn (wt. %) shape memory alloy was produced by vertically continuous casting technique obtaining bars of 8 mm in diameter which is applicable for plastic deformation. With the process of hot rolling and forging the 4.80 mm bar was produced. Afterwards, the obtained 4.80 mm bar was subjected to cold drawing process. After first run and after fourth run of cold drawing process the wire with diameter of 4.47 mm and 3.22 mm was produced, respectively. Optical microscopy (OM) and scanning electron microscopy (SEM) equipped with energy dispersive spectroscopy (EDS) shown the insight in the samples microstructure. The as-cast state sample has two phase (α+β) microstructure. After cold working process the two-phase (martensite+α) microstructure appears. As the result of the cold working process it can be noticed a texture inside the sample depending on cold drawing direction. The microhardness of samples increases as the wires diameter decreases.
Keywords (english)
Languageenglish
Publication typeScientific paper - Original scientific paper
Publication statusPublished
Peer reviewPeer review - international
Publication versionPublished version
Publication titleProceedings book 18th International Foundrymen Conference
Numberingpp. 237-246
ISBN978-953-7082-34-5
URN:NBNurn:nbn:hr:115:904720
Publication2019
ConferenceTitle: 18th International Foundrymen Conference, Coexistence of material science and sustainable technology in economic growth
Location: Sisak, Croatia
Start date: 2019-05-15
End date: 2019-05-17
Assembly type: Lecture
Document URLhttp://bib.irb.hr/1002342
Type of resourceText
PublisherUniversity of Zagreb Faculty of Metallurgy
Publishing placeSisak
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2019-07-03 06:55:21