prikaz prve stranice dokumenta Influence of Strip Cooling Rate on Lüders Bands Appearance During Subsequent Cold Deformation
  Download
PDF 17.5 MB
Scientific paper - Chapter in Book
Influence of Strip Cooling Rate on Lüders Bands Appearance During Subsequent Cold Deformation
In: New Technologies, Development and Application II / Karabegović, Isak (Ed.). Cham, Switzerland: Springer Nature Switzerland, 2020. pp. 299-333. https://doi.org/10.1007/978-3-030-18072-0_12
Rešković, Stoja; Brlić, Tin; Jandrlić, Ivan; Vodopivec, Franc

Institutional repository: Repository of Faculty of Metallurgy University of Zagreb

Cite this document

Rešković, S., Brlić, T., Jandrlić, I. & Vodopivec, F. (2020). Influence of Strip Cooling Rate on Lüders Bands Appearance During Subsequent Cold Deformation. In I. Karabegović, (Ed.), New Technologies, Development and Application II (pp. 299-333). Cham, Switzerland: Springer Nature Switzerland. doi: 10.1007/978-3-030-18072-0_12

Rešković, Stoja, et al. "Influence of Strip Cooling Rate on Lüders Bands Appearance During Subsequent Cold Deformation." New Technologies, Development and Application II, edited by Isak Karabegović, Springer Nature Switzerland, 2020, pp. 299-333. https://urn.nsk.hr/urn:nbn:hr:115:395625

Rešković, Stoja, Tin Brlić, Ivan Jandrlić and Franc Vodopivec. "Influence of Strip Cooling Rate on Lüders Bands Appearance During Subsequent Cold Deformation." In New Technologies, Development and Application II, edited by Isak Karabegović, 299-333. Cham, Switzerland: Springer Nature Switzerland, 2020. https://urn.nsk.hr/urn:nbn:hr:115:395625

Rešković, S., et al. (2020) 'Influence of Strip Cooling Rate on Lüders Bands Appearance During Subsequent Cold Deformation' in Karabegović, I. (ed.) New Technologies, Development and Application II Cham, Switzerland: Springer Nature Switzerland, pp. 299-333. Available at: https://urn.nsk.hr/urn:nbn:hr:115:395625 (Accessed 06 January 2025)

Rešković S, Brlić T, Jandrlić I, Vodopivec F. Influence of Strip Cooling Rate on Lüders Bands Appearance During Subsequent Cold Deformation. In: I. Karabegović, ed. New Technologies, Development and Application II. Cham, Switzerland: Springer Nature Switzerland; 2020. Pp. 299-333. [cited 2025 January 06] Available at: https://urn.nsk.hr/urn:nbn:hr:115:395625

S. Rešković, T. Brlić, I. Jandrlić and F. Vodopivec, "Influence of Strip Cooling Rate on Lüders Bands Appearance During Subsequent Cold Deformation", New Technologies, Development and Application II, I. Karabegović, Ed. Cham, Switzerland: Springer Nature Switzerland, 2020, pp. 299-333. [Online] Available at: https://urn.nsk.hr/urn:nbn:hr:115:395625

Metadata
Title (english)Influence of Strip Cooling Rate on Lüders Bands Appearance During Subsequent Cold Deformation
AuthorStoja Rešković
AuthorTin Brlić
AuthorIvan Jandrlić
AuthorFranc Vodopivec
EditorIsak Karabegović
Author's institutionUniversity of Zagreb
Faculty of Metallurgy
(Department of Mechanical Metallurgy)
(Laboratory of Deformation Metal Processing)
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Metallurgy
Abstract (english)
This paper presents the results of study of Lüders bands appearance on hot rolled strip during cold deformation. The research was carried out on niobium microalloyed steel. After the thermomechanical treatment the strip was cooled at different rates. Samples taken from hot rolled strip were tested by stretching to fracture with simultaneous application of the methods thermography and digital image correlation. The analysis of measurement results was performed with the software packages IRBIS 3 professional and MatchID. Significant differences were found in the samples tested at different cooling rates. In the samples cooled at a lower cooling rate, the appearance of Lüders bands in the elastoplastic area was determined. The appearance of Lüders bands was not observed in the samples cooled at a higher rates.
Keywords (english)
Languageenglish
Publication typeScientific paper - Chapter in Book
Publication statusPublished
Peer reviewPeer review - international
Publication versionPublished version
Book titleNew Technologies, Development and Application II
EditionSpringer Nature Switzerland
Numberingpp. 299-333
BPC0 HRK
ISBN978-3-030-18071-3
p-ISSN2367-3370
DOIhttps://doi.org/10.1007/978-3-030-18072-0_12
URN:NBNurn:nbn:hr:115:395625
Publication2020-06
ProjectNumber: IP-2016-06-1270
Title (croatian): Istraživanja početka plastičnog toka metala kod hladne deformacije
Acronym: MFSRIP062016
Leader: prof.dr.sc. Stoja Rešković
Jurisdiction: Croatia
Funding stream: IP
Type of resourceText
PublisherSpringer Nature Switzerland
Publishing placeCham, Switzerland
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2020-10-30 10:41:42