prikaz prve stranice dokumenta Karakterizacija mikrostrukture i faznih transformacija Cu-Al-Mn-Ag legura
  Download
PDF 3.43 MB
master's thesis
Karakterizacija mikrostrukture i faznih transformacija Cu-Al-Mn-Ag legura
Sisak: University of Zagreb, Faculty of Metallurgy, 2020. urn:nbn:hr:115:336597
Krtić, Željka
University of Zagreb
Faculty of Metallurgy

Institutional repository: Repository of Faculty of Metallurgy University of Zagreb

Cite this document

Krtić, Ž. (2020). Karakterizacija mikrostrukture i faznih transformacija Cu-Al-Mn-Ag legura (Master's thesis). Sisak: University of Zagreb, Faculty of Metallurgy. Retrieved from https://urn.nsk.hr/urn:nbn:hr:115:336597

Krtić, Željka. "Karakterizacija mikrostrukture i faznih transformacija Cu-Al-Mn-Ag legura." Master's thesis, University of Zagreb, Faculty of Metallurgy, 2020. https://urn.nsk.hr/urn:nbn:hr:115:336597

Krtić, Željka. "Karakterizacija mikrostrukture i faznih transformacija Cu-Al-Mn-Ag legura." Master's thesis, University of Zagreb, Faculty of Metallurgy, 2020. https://urn.nsk.hr/urn:nbn:hr:115:336597

Krtić, Ž. (2020). 'Karakterizacija mikrostrukture i faznih transformacija Cu-Al-Mn-Ag legura', Master's thesis, University of Zagreb, Faculty of Metallurgy, accessed 26 November 2024, https://urn.nsk.hr/urn:nbn:hr:115:336597

Krtić Ž. Karakterizacija mikrostrukture i faznih transformacija Cu-Al-Mn-Ag legura [Master's thesis]. Sisak: University of Zagreb, Faculty of Metallurgy; 2020 [cited 2024 November 26] Available at: https://urn.nsk.hr/urn:nbn:hr:115:336597

Ž. Krtić, "Karakterizacija mikrostrukture i faznih transformacija Cu-Al-Mn-Ag legura", Master's thesis, University of Zagreb, Faculty of Metallurgy, Sisak, 2020. Available at: https://urn.nsk.hr/urn:nbn:hr:115:336597

Metadata
TitleKarakterizacija mikrostrukture i faznih transformacija Cu-Al-Mn-Ag legura
Title (english)Microstructure characterization and phase transformations of Cu-Al-Mn-Ag alloys
AuthorŽeljka Krtić
MentorTamara Holjevac Grgurić (mentor)
Committee memberStjepan Kožuh (predsjednik povjerenstva)
Committee memberTamara Holjevac Grgurić (član povjerenstva)
Committee memberLjerka Slokar Benić (član povjerenstva)
GranterUniversity of Zagreb
Faculty of Metallurgy
Sisak
Defense date and country2020-10-30, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Metallurgy
Abstract
Cu-Al-Mn legure s prisjetljivosti oblika postale su vrlo atraktivne za komercijalnu primjenu u bioinženjerstvu, dentalnoj industriji te u proizvodnji senzora i aktuatora, i sve više zamjenjuju uporabu vrlo skupe Ni-Ti legure, s obzirom na njihovu nisku cijenu koštanja, veliku superelastičnost te izrazitu duktilnost. Efekt prisljetljivosti oblika u istraživanim legurama posljedica je bezdifuzijske martenzitne transformacije, koja podrazumjeva promjenu kristalne strukture materijala. Dodavanjem mangana osnovnoj binarnoj Cu-Al leguri, proširuje se područje -faze, ključnoj fazi za postizanje martenzitne strukture, `-faze, čime se povećava duktilnost materijala te sposobnost njenog hladnog deformiranja. Daljnjim dodavanjem mikrolegirajućih elemenata ternarnoj Cu-Al-Mn leguri, može se utjecati na smanjenje veličine zrna, čvrstoću materijala, pomak faznih transformacija te efekt prisjetljivosti oblika. Stoga je u ovom radu istražen utjecaj srebra na mikrostrukturu i temperature faznih transformacija Cu-Al-Mn legura. Cu-Al-Mn-Ag legure pripremljene su taljenjem u elektrolučnoj peći te lijevane u cilindrični kalup, dimenzija 8 mm x*1,2 cm. Termodinamički proračun i mehanizam skrućivanja Cu-Al-Mn legura proveden je programom Thermo-Calc, korištenjem termodinamičkih podataka prema Miettinenu. Simultanom tehnikom toplinske analize, diferencijalnom pretražnom kalorimetrijom/termogravimetrijom (STA DSC/TG) određene su temperature transformacija Cu-Al-Mn-Ag legura, dinamičkim mjerenjima kroz 2 ciklusa zagrijavanje/hlađenje, u atmosferi argona. Mikrostrukturna ispitivanja provedena su optičkom mikroskopijom (OM) te skenirajućom elektronskom mikroskopijom (SEM), dok je energijsko disperzijskom spektrometrijom (EDS) određen kemijski sastav istraživanih sustava. Rezultati mikrostrukture korelirani su sa promjenom sastava Cu-Al-Mn-Ag legure i udjelom srebra te pomakom temperatura transformacija.
Abstract (english)
Cu-Al-Mn shape memory alloys became very attractive for commercial use in the bioengineering, dental industry and in the high-demand industry for sensors or actuators, and they are frequently used instead of very expensive Ni-Ti alloy, due to their low cost, superelasticity and high ductility. Shape memory effect is a consequence of the diffusionless martensitic transformation, which implies a change of crystal structure. Addition of manganese to binary Cu-Al alloy, broadens -phase region, parent phase for formation of martensitic structure, `-phase, what increase ductility and cold workability of material. Further addition of alloying elements influences to decreasing of grain size, changes of phase transformation temperatures, mechanical properties and shape memory effect. In this paper, the effect of silver addition on the microstructure and transformation temperatures of Cu-Al-Mn alloys was investigated. Cu-Al-Mn-Ag alloys were prepared by melting in the electric-arc furnace and casted in the moulds dimensions 8 mm*1.2 cm. Thermodynamic calculation and solidification mechanism was performed by software Thermo-Calc 5, with thermodynamic data according to Miettinen. Transformation temperatures of Cu-Al-Mn-Ag alloys were carried out by simultaneous thermal analysis differential scanning calorimetry/thermogravimetry (STA DSC/TG) through two dynamic cycles in the argon atmosphere. Microstructural investigations were performed by optical microscopy (OM) and scanning electron microscopy (SEM), while chemical content of specimens was determined by energy-dispersive spectrometry (EDS). Microstructural results were correlated with silver content in Cu-Al-Mn-Ag alloy as well as transformation temperatures.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:115:336597
Study programmeTitle: Graduate study program Metallurgy
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka metalurgije (magistar/magistra inženjer/inženjerka metalurgije)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2020-11-02 08:55:21