prikaz prve stranice dokumenta The Effect of Heat Treatment on Damping Capacity and Mechanical Properties of CuAlNi Shape Memory Alloy
  Download
PDF 5.37 MB
Scientific paper - Original scientific paper
The Effect of Heat Treatment on Damping Capacity and Mechanical Properties of CuAlNi Shape Memory Alloy
Materials, 15 (2022), 5; 1825. https://doi.org/10.3390/ma15051825
Ivanić, Ivana; Kožuh, Stjepan; Holjevac Grgurić, Tamara; Vrsalović, Ladislav; Gojić, Mirko

Institutional repository: Repository of Faculty of Metallurgy University of Zagreb

Cite this document

Ivanić, I., Kožuh, S., Holjevac Grgurić, T., Vrsalović, L. & Gojić, M. (2022). The Effect of Heat Treatment on Damping Capacity and Mechanical Properties of CuAlNi Shape Memory Alloy. Materials, 15. (5). doi: 10.3390/ma15051825

Ivanić, Ivana, et al. "The Effect of Heat Treatment on Damping Capacity and Mechanical Properties of CuAlNi Shape Memory Alloy." Materials, vol. 15, no. 5, 2022. https://doi.org/10.3390/ma15051825

Ivanić, Ivana, Stjepan Kožuh, Tamara Holjevac Grgurić, Ladislav Vrsalović and Mirko Gojić. "The Effect of Heat Treatment on Damping Capacity and Mechanical Properties of CuAlNi Shape Memory Alloy." Materials 15, no. 5 (2022). https://doi.org/10.3390/ma15051825

Ivanić, I., et al. (2022) 'The Effect of Heat Treatment on Damping Capacity and Mechanical Properties of CuAlNi Shape Memory Alloy', Materials, 15(5). doi: 10.3390/ma15051825

Ivanić I, Kožuh S, Holjevac Grgurić T, Vrsalović L, Gojić M. The Effect of Heat Treatment on Damping Capacity and Mechanical Properties of CuAlNi Shape Memory Alloy. Materials [Internet]. 2022 [cited 2024 May 29];15(5). doi: 10.3390/ma15051825

I. Ivanić, S. Kožuh, T. Holjevac Grgurić, L. Vrsalović and M. Gojić, "The Effect of Heat Treatment on Damping Capacity and Mechanical Properties of CuAlNi Shape Memory Alloy", Materials, vol. 15, no. 5, 2022. [Online]. Available at: https://urn.nsk.hr/urn:nbn:hr:115:975349. [Accessed: 29 May 2024]

Metadata
Title (english)The Effect of Heat Treatment on Damping Capacity and Mechanical Properties of CuAlNi Shape Memory Alloy
AuthorIvana Ivanić
MBZ: 335063
AuthorStjepan Kožuh
MBZ: 248081
AuthorTamara Holjevac Grgurić
MBZ: 241081
AuthorLadislav Vrsalović
MBZ: 237626
AuthorMirko Gojić
MBZ: 63390
Author's institutionCatholic University of Croatia
Author's institutionUniversity of Split
Faculty of Chemistry and Technology
Author's institutionUniversity of Zagreb
Faculty of Metallurgy
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Metallurgy
Abstract (english)
This paper discusses the effect of different heat treatment procedures on the microstructural characteristics, damping capacities, and mechanical properties of CuAlNi shape memory alloys (SMA). The investigation was performed on samples in the as-cast state and heat treated states (solution annealing at 885 °C/60’/H2O and after tempering at 300 °C/60’/H2O). The microstructure of the samples was examined by light microscopy (LM) and scanning electron microscopy (SEM) equipped with a device for energy dispersive spectrometry (EDS) analysis. Light and scanning electron microscopy showed martensitic microstructure in all investigated samples. However, the changes in microstructure due to heat treatment by the presence of two types of martensite phases (β1’ and γ1’) influenced alloy damping and mechanical properties by enhancing alloy damping characteristics. Heat treatment procedure reduced the alloys’ mechanical properties and increased hardness of the alloy. Fractographic analysis of the alloy showed a transgranular type of fracture in samples after casting. After solution annealing, two types of fracture mechanisms can be noticed, transgranular and intergranular, while in tempered samples, mostly an intergranular type of fracture exists.
Keywords (english)
Languageenglish
Publication typeScientific paper - Original scientific paper
Publication statusPublished
Peer reviewPeer review - international
Publication versionPublished version
Journal titleMaterials
Numberingvol. 15, no. 5, 1825
e-ISSN1996-1944
DOIhttps://doi.org/10.3390/ma15051825
URN:NBNurn:nbn:hr:115:975349
Publication2022
ProjectNumber: IP-2014-09-3405
Title (croatian): Dizajniranje mikrostrukture i funkcionalnih svojstava legura s prisjetljivosti oblika na bazi bakra
Title (english): Design of Microstructure and Functional Properties of Cu-based Shape Memory Alloys
Acronym: DMFP-CuSMA
Leader: Mirko Gojić
Jurisdiction: Croatia
Funding stream: IP
Document URLhttp://bib.irb.hr/1182627
Type of resourceText
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2022-03-02 07:35:41