prikaz prve stranice dokumenta Karakterizacija nanesenog fotokatalizatora titan(IV) oksida na karbonska vlakna
  Download
PDF 24.09 MB
master's thesis
Karakterizacija nanesenog fotokatalizatora titan(IV) oksida na karbonska vlakna
Sisak: University of Zagreb, Faculty of Metallurgy, 2022. urn:nbn:hr:115:788288
Liščinski, Kristijan
University of Zagreb
Faculty of Metallurgy

Institutional repository: Repository of Faculty of Metallurgy University of Zagreb

Cite this document

Liščinski, K. (2022). Karakterizacija nanesenog fotokatalizatora titan(IV) oksida na karbonska vlakna (Master's thesis). Sisak: University of Zagreb, Faculty of Metallurgy. Retrieved from https://urn.nsk.hr/urn:nbn:hr:115:788288

Liščinski, Kristijan. "Karakterizacija nanesenog fotokatalizatora titan(IV) oksida na karbonska vlakna." Master's thesis, University of Zagreb, Faculty of Metallurgy, 2022. https://urn.nsk.hr/urn:nbn:hr:115:788288

Liščinski, Kristijan. "Karakterizacija nanesenog fotokatalizatora titan(IV) oksida na karbonska vlakna." Master's thesis, University of Zagreb, Faculty of Metallurgy, 2022. https://urn.nsk.hr/urn:nbn:hr:115:788288

Liščinski, K. (2022). 'Karakterizacija nanesenog fotokatalizatora titan(IV) oksida na karbonska vlakna', Master's thesis, University of Zagreb, Faculty of Metallurgy, accessed 02 August 2024, https://urn.nsk.hr/urn:nbn:hr:115:788288

Liščinski K. Karakterizacija nanesenog fotokatalizatora titan(IV) oksida na karbonska vlakna [Master's thesis]. Sisak: University of Zagreb, Faculty of Metallurgy; 2022 [cited 2024 August 02] Available at: https://urn.nsk.hr/urn:nbn:hr:115:788288

K. Liščinski, "Karakterizacija nanesenog fotokatalizatora titan(IV) oksida na karbonska vlakna", Master's thesis, University of Zagreb, Faculty of Metallurgy, Sisak, 2022. Available at: https://urn.nsk.hr/urn:nbn:hr:115:788288

Metadata
TitleKarakterizacija nanesenog fotokatalizatora titan(IV) oksida na karbonska vlakna
Title (english)Characterization of applied titanium (IV) oxide photocatalyst on the carbon fibers
AuthorKristijan Liščinski
MentorIvan Brnardić (mentor)
MentorIgor Jajčinović (pomoć pri izradi, neposredni voditelj)
Committee memberAnita Štrkalj (predsjednik povjerenstva)
Committee memberIvan Brnardić (član povjerenstva)
Committee memberDamir Hršak (član povjerenstva)
GranterUniversity of Zagreb
Faculty of Metallurgy
Sisak
Defense date and country2022-10-27, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Metallurgy
Abstract
Napretkom društva i industrije raste i potrošnja čiste vode te se stvaraju sve veće količine otpadne vode koja je onečišćena raznim organskim i anorganskim tvarima. Mikroonečišćujuće tvari predstavljaju najveću opasnost koja proizlazi od njihovih potencijalnih svojstava da uzrokuju neželjene kemijske reakcije u okolišu koje utječu na zdravlje ljudi. Vrlo ih je teško ili gotovo nemoguće ukloniti standardnim mehaničkim i biološkim procesima. Metode koje bi se mogle upotrebljavati u pročišćavanju otpadnih voda su napredni oksidacijski postupci kao što je fotokataliza. Za proces fotokatalize potrebna je prisutnost fotokatalizatora, a jedan od fotokatalizatora koji se najčešće upotrebljava je TiO2. U ovom radu istraženi su fotokatalizatori koji su pripravljeni nanošenjem TiO2 na karbonska vlakna i sol – gel metodom na staklena vlakna te je ispitan utjecaj na fotokatalitička svojstva.
Abstract (english)
With the progress of society and industry, the consumption of clean water is also increasing, and increasing amounts of waste water are created that are contaminated with various organic and inorganic substances. Micropollutants represent the greatest danger arising from their potential properties to cause unwanted chemical reactions in the environment that affect human health. They are very difficult or almost impossible to remove by standard mechanical and biological processes. Methods that could be used in wastewater treatment are advanced oxidation processes such as photocatalysis. The photocatalysis process requires the presence of a photocatalyst, and one of the photocatalysts used is TiO2. In this work, photocatalysts prepared by applying TiO2 to carbon fibers and by the sol-gel method to glass fibers were investigated, and the influence on the photocatalytic properties was examined.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:115:788288
Study programmeTitle: Graduate study program Metallurgy
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka metalurgije (magistar/magistra inženjer/inženjerka metalurgije)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2022-10-17 19:13:44