prikaz prve stranice dokumenta Application of characterisation methods in the development of biomedical titanium alloys
  Download
PDF 10.25 MB
Scientific paper - Review paper
Application of characterisation methods in the development of biomedical titanium alloys
Machines, Technologies, Materials, 17 (2023), 2; 86-89. urn:nbn:hr:115:462236
Jajčinović, Magdalena; Slokar Benić, Ljerka; Pezer, Robert; Holjevac Grgurić, Tamara

Institutional repository: Repository of Faculty of Metallurgy University of Zagreb

Cite this document

Jajčinović, M., Slokar Benić, Lj., Pezer, R. & Holjevac Grgurić, T. (2023). Application of characterisation methods in the development of biomedical titanium alloys. Machines, Technologies, Materials, 17. (2), 86-89. Retrieved from https://urn.nsk.hr/urn:nbn:hr:115:462236

Jajčinović, Magdalena, et al. "Application of characterisation methods in the development of biomedical titanium alloys." Machines, Technologies, Materials, vol. 17, no. 2, 2023, pp. 86-89. https://urn.nsk.hr/urn:nbn:hr:115:462236

Jajčinović, Magdalena, Ljerka Slokar Benić, Robert Pezer and Tamara Holjevac Grgurić. "Application of characterisation methods in the development of biomedical titanium alloys." Machines, Technologies, Materials 17, no. 2 (2023): 86-89. https://urn.nsk.hr/urn:nbn:hr:115:462236

Jajčinović, M., et al. (2023) 'Application of characterisation methods in the development of biomedical titanium alloys', Machines, Technologies, Materials, 17(2), pp. 86-89. Available at: https://urn.nsk.hr/urn:nbn:hr:115:462236 (Accessed 30 December 2024)

Jajčinović M, Slokar Benić Lj, Pezer R, Holjevac Grgurić T. Application of characterisation methods in the development of biomedical titanium alloys. Machines, Technologies, Materials [Internet]. 2023 [cited 2024 December 30];17(2):86-89. Available at: https://urn.nsk.hr/urn:nbn:hr:115:462236

M. Jajčinović, Lj. Slokar Benić, R. Pezer and T. Holjevac Grgurić, "Application of characterisation methods in the development of biomedical titanium alloys", Machines, Technologies, Materials, vol. 17, no. 2, pp. 86-89, 2023. [Online]. Available at: https://urn.nsk.hr/urn:nbn:hr:115:462236. [Accessed: 30 December 2024]

Metadata
Title (english)Application of characterisation methods in the development of biomedical titanium alloys
AuthorMagdalena Jajčinović
AuthorLjerka Slokar Benić
AuthorRobert Pezer
AuthorTamara Holjevac Grgurić
Author's institutionCatholic University of Croatia
(School of Medicine Catholic University of Croatia)
Author's institutionUniversity of Zagreb
Faculty of Metallurgy
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Metallurgy
Abstract (english)
Biomaterials are becoming an increasingly important research topic over time as they are used to replace parts and functions of the human body, helping to improve the quality of human life. Titanium alloys are particularly important for the development of new biomaterials. Commercial pure titanium and its alloys are used as essential structural biomaterials in the manufacture of implants due to their excellent biocompatibility, good corrosion resistance and mechanical strength. However, studies have shown that aluminum and vanadium ions are released in alloys such as Ti-6Al-4V, which can cause health problems over time. Because of the problems that occur, researchers are working to improve the properties of titanium alloys by adding new elements. In most cases, different metals are added to titanium and it is known that with the presence of different metals, the properties of titanium also change. All biomedical titanium alloys must undergo various testing procedures before they can be used. The article describes the characterisation methods used in the development of titanium alloys, such as: light and scanning electron microscopy, energy-dispersive spectrometry, X-ray diffraction analysis, differential scanning calorimetry, differential thermal analysis. The reliability of the results depends on the methods used and the avoidance of errors in the characterisation of biomedical alloys in order to reach better conclusions and produce alloys of the highest quality desirable for use in the human body.
Keywords (english)
Languageenglish
Publication typeScientific paper - Review paper
Publication statusPublished
Peer reviewPeer review - international
Publication versionPublished version
Journal titleMachines, Technologies, Materials
Numberingvol. 17, no. 2, pp. 86-89
p-ISSN1313-0226
e-ISSN1314-507X
URN:NBNurn:nbn:hr:115:462236
Publication2023
Document URLhttp://bib.irb.hr/1262128
Type of resourceText
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2023-07-06 06:45:04