prikaz prve stranice dokumenta Roughness of the Surface of Zirconia Reinforced Lithium Disilicate Ceramic Treated by Different Procedures
  Download
PDF 10.88 MB
Scientific paper - Original scientific paper
Roughness of the Surface of Zirconia Reinforced Lithium Disilicate Ceramic Treated by Different Procedures
Materials, 16 (2022), 1; 265. https://doi.org/10.3390/ma16010265
Carek, Andreja; Slokar Benić, Ljerka; Komar, Daniel; Krebelj, Ena

Institutional repository: Repository of Faculty of Metallurgy University of Zagreb

Cite this document

Carek, A., Slokar Benić, Lj., Komar, D. & Krebelj, E. (2022). Roughness of the Surface of Zirconia Reinforced Lithium Disilicate Ceramic Treated by Different Procedures. Materials, 16. (1). doi: 10.3390/ma16010265

Carek, Andreja, et al. "Roughness of the Surface of Zirconia Reinforced Lithium Disilicate Ceramic Treated by Different Procedures." Materials, vol. 16, no. 1, 2022. https://doi.org/10.3390/ma16010265

Carek, Andreja, Ljerka Slokar Benić, Daniel Komar and Ena Krebelj. "Roughness of the Surface of Zirconia Reinforced Lithium Disilicate Ceramic Treated by Different Procedures." Materials 16, no. 1 (2022). https://doi.org/10.3390/ma16010265

Carek, A., et al. (2022) 'Roughness of the Surface of Zirconia Reinforced Lithium Disilicate Ceramic Treated by Different Procedures', Materials, 16(1). doi: 10.3390/ma16010265

Carek A, Slokar Benić Lj, Komar D, Krebelj E. Roughness of the Surface of Zirconia Reinforced Lithium Disilicate Ceramic Treated by Different Procedures. Materials [Internet]. 2022 December 27 [cited 2024 May 26];16(1). doi: 10.3390/ma16010265

A. Carek, Lj. Slokar Benić, D. Komar and E. Krebelj, "Roughness of the Surface of Zirconia Reinforced Lithium Disilicate Ceramic Treated by Different Procedures", Materials, vol. 16, no. 1, December 2022. [Online]. Available at: https://urn.nsk.hr/urn:nbn:hr:115:520661. [Accessed: 26 May 2024]

Metadata
Title (english)Roughness of the Surface of Zirconia Reinforced Lithium Disilicate Ceramic Treated by Different Procedures
AuthorAndreja Carek
AuthorLjerka Slokar Benić
AuthorDaniel Komar
AuthorEna Krebelj
Author's institutionUniversity of Zagreb
Faculty of Metallurgy
Author's institutionUniversity of Zagreb
School of Dental Medicine
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Metallurgy
Abstract (english)
Lithium disilicate and zirconia are the two most popular materials for aesthetic and dental prosthetic work; however, due to their limitations, a new material is being researched, namely zirconia-reinforced lithium disilicate, the surface of which is treated with different procedures to achieve the best possible surface properties. In this study, the surface of zirconia-reinforced lithium disilicate glass-ceramic was treated using different methods (conventional and laser) to determine the effects of the treatment procedures on the surface properties and surface roughness to achieve a higher strength of adhesion from the self-adhesive resin cement to zirconia-reinforced lithium disilicate. The treated surfaces were investigated using profilometry, X-ray diffraction and energy dispersive X-ray fluorescence. The results obtained were statistically evaluated. The results show that the surface roughness is highest for the samples treated with Er:YAG (erbium-doped yttrium aluminium garnet laser) and silanisation. Furthermore, the surface treatment procedures applied did not change the composition of the surface.
Keywords (english)
Languageenglish
Publication typeScientific paper - Original scientific paper
Publication statusPublished
Peer reviewPeer review - international
Publication versionPublished version
Journal titleMaterials
Numberingvol. 16, no. 1, 265
e-ISSN1996-1944
DOIhttps://doi.org/10.3390/ma16010265
URN:NBNurn:nbn:hr:115:520661
Publication2022-12-27
Document URLhttps://www.mdpi.com/1996-1944/16/1/265
Type of resourceText
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2023-07-06 06:51:44