prikaz prve stranice dokumenta Modeling of stress distribution on the basis of the measured values of strain and temperature changes
  Download
PDF 622.54 KB
Scientific paper - Original scientific paper
Modeling of stress distribution on the basis of the measured values of strain and temperature changes
AIMS Materials Science, 6 (2019), 4; 601-609. https://doi.org/10.3934/matersci.2019.4.601
Jandrlić, Ivan; Rešković, Stoja; Ćurčija, Dušan; Lazić, Ladislav; Brlić, Tin

Institutional repository: Repository of Faculty of Metallurgy University of Zagreb

Cite this document

Jandrlić, I., Rešković, S., Ćurčija, D., Lazić, L. & Brlić, T. (2019). Modeling of stress distribution on the basis of the measured values of strain and temperature changes. AIMS Materials Science, 6. (4), 601-609. doi: 10.3934/matersci.2019.4.601

Jandrlić, Ivan, et al. "Modeling of stress distribution on the basis of the measured values of strain and temperature changes." AIMS Materials Science, vol. 6, no. 4, 2019, pp. 601-609. https://doi.org/10.3934/matersci.2019.4.601

Jandrlić, Ivan, Stoja Rešković, Dušan Ćurčija, Ladislav Lazić and Tin Brlić. "Modeling of stress distribution on the basis of the measured values of strain and temperature changes." AIMS Materials Science 6, no. 4 (2019): 601-609. https://doi.org/10.3934/matersci.2019.4.601

Jandrlić, I., et al. (2019) 'Modeling of stress distribution on the basis of the measured values of strain and temperature changes', AIMS Materials Science, 6(4), pp. 601-609. doi: 10.3934/matersci.2019.4.601

Jandrlić I, Rešković S, Ćurčija D, Lazić L, Brlić T. Modeling of stress distribution on the basis of the measured values of strain and temperature changes. AIMS Materials Science [Internet]. 2019 July 05 [cited 2025 January 06];6(4):601-609. doi: 10.3934/matersci.2019.4.601

I. Jandrlić, S. Rešković, D. Ćurčija, L. Lazić and T. Brlić, "Modeling of stress distribution on the basis of the measured values of strain and temperature changes", AIMS Materials Science, vol. 6, no. 4, pp. 601-609, July 2019. [Online]. Available at: https://urn.nsk.hr/urn:nbn:hr:115:377045. [Accessed: 06 January 2025]

Metadata
Title (english)Modeling of stress distribution on the basis of the measured values of strain and temperature changes
AuthorIvan Jandrlić
AuthorStoja Rešković
AuthorDušan Ćurčija
MBZ: 4741
AuthorLadislav Lazić
AuthorTin Brlić
Author's institutionUniversity of Zagreb
Faculty of Metallurgy
(Department of Mechanical Metallurgy)
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Metallurgy
Mechanical Metallurgy
Abstract (english)
This paper proposes a new mathematical model for calculation of stresses on the basis of experimentally measured values of strains and temperature changes for niobium microalloyed steel. Construction of model was done using a multiple regression analysis of the measured values of temperature change, deformation and stresses at four different stretching rates. All investigations were conducted on samples from the niobium microalloyed steel, using thermography and digital image correlation during static tensile testing. Constructed model was tested and validated on the experimentally obtained results. Model showed a good agreement of calculated stress values with experimentally obtained ones.
Keywords (english)
Languageenglish
Publication typeScientific paper - Original scientific paper
Publication statusPublished
Peer reviewPeer review - international
Publication versionPublished version
Journal titleAIMS Materials Science
Numberingvol. 6, no. 4, pp. 601-609
e-ISSN2372-0484
DOIhttps://doi.org/10.3934/matersci.2019.4.601
URN:NBNurn:nbn:hr:115:377045
Publication2019-07-05
ProjectNumber: IP-2016-06-1270
Title (croatian): Istraživanja početka plastičnog toka metala kod hladne deformacije
Acronym: MFSRIP062016
Leader: Stoja Rešković
Jurisdiction: Croatia
Funding stream: IP
Type of resourceText
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2024-04-23 12:22:29