prikaz prve stranice dokumenta Study on strengthening during cold drawing of steel tubes
  Download
PDF 3.44 MB
Scientific paper - Preliminary note / Short communication
Study on strengthening during cold drawing of steel tubes
In: Conference Proceedings Mechanical Technologies and Structural Materials. / Jozić, Sonja; Lela, Branimir (Ed.). Split: Croatian Society for Mechanical Technologies, 2019. pp. 83-88. urn:nbn:hr:115:400748
Jandrlić, Ivan; Rešković, Stoja; Tarandek, Patrik; Slokar Benić, Ljerka; Brlić, Tin

Institutional repository: Repository of Faculty of Metallurgy University of Zagreb

Cite this document

Jandrlić, I., Rešković, S., Tarandek, P., Slokar Benić, Lj. & Brlić, T. (2019). Study on strengthening during cold drawing of steel tubes. In S. Jozić, (Ed.), B. Lela, (Ed.), Conference Proceedings Mechanical Technologies and Structural Materials (pp. 83-88). Split: Croatian Society for Mechanical Technologies. Retrieved from https://urn.nsk.hr/urn:nbn:hr:115:400748

Jandrlić, Ivan, et al. "Study on strengthening during cold drawing of steel tubes." Conference Proceedings Mechanical Technologies and Structural Materials, edited by Sonja Jozić, edited by Branimir Lela, Croatian Society for Mechanical Technologies, 2019, pp. 83-88. https://urn.nsk.hr/urn:nbn:hr:115:400748

Jandrlić, Ivan, Stoja Rešković, Patrik Tarandek, Ljerka Slokar Benić and Tin Brlić. "Study on strengthening during cold drawing of steel tubes." In Conference Proceedings Mechanical Technologies and Structural Materials, 83-88. Split: Croatian Society for Mechanical Technologies, 2019. Accessed 2025 January 06. https://urn.nsk.hr/urn:nbn:hr:115:400748

Jandrlić, I., et al. (2019) 'Study on strengthening during cold drawing of steel tubes', in Jozić, S. (ed.), Lela, B. (ed.), Conference Proceedings Mechanical Technologies and Structural Materials, Croatian Society for Mechanical Technologies, Split, pp. 83-88. Available at: https://urn.nsk.hr/urn:nbn:hr:115:400748 (Accessed 06 January 2025)

Jandrlić I, Rešković S, Tarandek P, Slokar Benić Lj, Brlić T. Study on strengthening during cold drawing of steel tubes. In: S. Jozić, ed., B. Lela, ed. Conference Proceedings Mechanical Technologies and Structural Materials. Split: Croatian Society for Mechanical Technologies; 2019. Pp. 83-88. [cited 2025 January 06] Available at: https://urn.nsk.hr/urn:nbn:hr:115:400748

I. Jandrlić, S. Rešković, P. Tarandek, Lj. Slokar Benić and T. Brlić, "Study on strengthening during cold drawing of steel tubes", Conference Proceedings Mechanical Technologies and Structural Materials, S. Jozić and B. Lela, Eds. Split: Croatian Society for Mechanical Technologies, 2019. [Online] Available at: https://urn.nsk.hr/urn:nbn:hr:115:400748 [Accessed: 06 January 2025]

Metadata
Title (english)Study on strengthening during cold drawing of steel tubes
AuthorIvan Jandrlić
AuthorStoja Rešković
AuthorPatrik Tarandek
AuthorLjerka Slokar Benić
AuthorTin Brlić
EditorSonja Jozić
EditorBranimir Lela
Author's institutionUniversity of Zagreb
Faculty of Metallurgy
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Metallurgy
Abstract (english)
Study on strengthening during cold drawing was carried out on the samples taken from the steel tube before and after the cold drawing on drawing bench. Low carbon steel tubes were previously prepared and cold- drawn through the drawing dies with a different degree of reduction. During the process, the process is stopped and samples were taken in front of deformation zone, in the zone itself and behind the deformation zone. Detailed measurements on changes in the hardness and microstructure in the deformation zone were performed. The effect of the degree of deformation on the strengthening of the tested steel during the cold drawing was determined.
Keywords (english)
Languageenglish
Publication typeScientific paper - Preliminary note / Short communication
Publication statusPublished
Peer reviewPeer review - international
Publication versionPublished version
Publication titleConference Proceedings Mechanical Technologies and Structural Materials
Numberingpp. 83-88
p-ISSN1847-7917
URN:NBNurn:nbn:hr:115:400748
Publication2019-09
ProjectNumber: IP-2016-06-1270
Title (croatian): Istraživanja početka plastičnog toka metala kod hladne deformacije
Acronym: MFSRIP062016
Leader: Stoja Rešković
Jurisdiction: Croatia
Funding stream: IP
ConferenceTitle: 9th International Conference Mechanical Technologies and Structural Materials 2019
Acronym: MTSM2019
Location: Split, Croatia
Organizer: Croatian Society for Mechanical Technologies, Croatia
Start date: 2019-09-26
End date: 2019-09-27
Assembly type: Lecture
Type of resourceText
PublisherCroatian Society for Mechanical Technologies
Publishing placeSplit
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2024-04-23 12:44:40