prikaz prve stranice dokumenta Numerical analysis of metallographic preparation effect on the hardness of titanium alloy
  Download
PDF 1.13 MB
Scientific paper - Original scientific paper
Numerical analysis of metallographic preparation effect on the hardness of titanium alloy
Machines. Technologies. Materials., 16 (2022), 2; 66-69. urn:nbn:hr:115:906330
Slokar Benić, Ljerka; Ivec, Ivan; Šimić, Klara; Jandrlić, Ivan

Institutional repository: Repository of Faculty of Metallurgy University of Zagreb

Cite this document

Slokar Benić, Lj., Ivec, I., Šimić, K. & Jandrlić, I. (2022). Numerical analysis of metallographic preparation effect on the hardness of titanium alloy. Machines. Technologies. Materials., 16. (2), 66-69. Retrieved from https://urn.nsk.hr/urn:nbn:hr:115:906330

Slokar Benić, Ljerka, et al. "Numerical analysis of metallographic preparation effect on the hardness of titanium alloy." Machines. Technologies. Materials., vol. 16, no. 2, 2022, pp. 66-69. https://urn.nsk.hr/urn:nbn:hr:115:906330

Slokar Benić, Ljerka, Ivan Ivec, Klara Šimić and Ivan Jandrlić. "Numerical analysis of metallographic preparation effect on the hardness of titanium alloy." Machines. Technologies. Materials. 16, no. 2 (2022): 66-69. https://urn.nsk.hr/urn:nbn:hr:115:906330

Slokar Benić, Lj., et al. (2022) 'Numerical analysis of metallographic preparation effect on the hardness of titanium alloy', Machines. Technologies. Materials., 16(2), pp. 66-69. Available at: https://urn.nsk.hr/urn:nbn:hr:115:906330 (Accessed 05 September 2024)

Slokar Benić Lj, Ivec I, Šimić K, Jandrlić I. Numerical analysis of metallographic preparation effect on the hardness of titanium alloy. Machines. Technologies. Materials. [Internet]. 2022 [cited 2024 September 05];16(2):66-69. Available at: https://urn.nsk.hr/urn:nbn:hr:115:906330

Lj. Slokar Benić, I. Ivec, K. Šimić and I. Jandrlić, "Numerical analysis of metallographic preparation effect on the hardness of titanium alloy", Machines. Technologies. Materials., vol. 16, no. 2, pp. 66-69, 2022. [Online]. Available at: https://urn.nsk.hr/urn:nbn:hr:115:906330. [Accessed: 05 September 2024]

Metadata
Title (english)Numerical analysis of metallographic preparation effect on the hardness of titanium alloy
AuthorLjerka Slokar Benić
AuthorIvan Ivec
AuthorKlara Šimić
AuthorIvan Jandrlić
Author's institutionUniversity of Zagreb
Faculty of Metallurgy
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Metallurgy
Abstract (english)
Titanium alloys due to their good properties are increasingly used in biomedicine. However, in order to improve certain properties, titanium- based alloys with new chemical compositions are designed. In order to be characterized in a satisfactory manner, they must first be adequately prepared. In this paper the two most influential parameters were varied: grinding time and force, while the speed of rotation of the grinding wheel was constant. After grinding with the highest gradation of grind paper, the samples were observed under a light microscope to determine the condition of the surface. Then their hardness was determined by the Vickers method with different indenter loads. After that, the samples were polished under the same conditions, and their hardness was determined again. The obtained hardness values were numerically analyzed and the corresponding functional dependences of the measured hardness on the grinding parameters (time and force) and on the indentation force were determined.
Keywords (english)
Languageenglish
Publication typeScientific paper - Original scientific paper
Publication statusPublished
Peer reviewPeer review - international
Publication versionPublished version
Journal titleMachines. Technologies. Materials.
Numberingvol. 16, no. 2, pp. 66-69
p-ISSN1313-0226
URN:NBNurn:nbn:hr:115:906330
Publication2022
Type of resourceText
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2024-04-24 11:37:48