prikaz prve stranice dokumenta Changes in structure and properties of copper wire during the production and processing
  Download
PDF 1.43 MB
Scientific paper - Original scientific paper
Changes in structure and properties of copper wire during the production and processing
In: Abstract Proceedings 62nd IFC Portorož 2022. / Jan-Blažič, Mrjam (Ed.). Ljubljana: Tisk Fleks d.o.o., 2022. urn:nbn:hr:115:521645
Jandrlić, Ivan; Kozina, Franjo; Brlić, Tin; Mrkobrada, Lorena

Institutional repository: Repository of Faculty of Metallurgy University of Zagreb

Cite this document

Jandrlić, I., Kozina, F., Brlić, T. & Mrkobrada, L. (2022). Changes in structure and properties of copper wire during the production and processing. In M. Jan Blažič, (Ed.), Abstract Proceedings 62nd IFC Portorož 2022. Ljubljana: Tisk Fleks d.o.o.. Retrieved from https://urn.nsk.hr/urn:nbn:hr:115:521645

Jandrlić, Ivan, et al. "Changes in structure and properties of copper wire during the production and processing." Abstract Proceedings 62nd IFC Portorož 2022, edited by Mrjam Jan Blažič, Tisk Fleks d.o.o., 2022. https://urn.nsk.hr/urn:nbn:hr:115:521645

Jandrlić, Ivan, Franjo Kozina, Tin Brlić and Lorena Mrkobrada. "Changes in structure and properties of copper wire during the production and processing." In Abstract Proceedings 62nd IFC Portorož 2022. Ljubljana: Tisk Fleks d.o.o., 2022. Accessed 2024 August 12. https://urn.nsk.hr/urn:nbn:hr:115:521645

Jandrlić, I., et al. (2022) 'Changes in structure and properties of copper wire during the production and processing', in Jan Blažič, M. (ed.), Abstract Proceedings 62nd IFC Portorož 2022, Tisk Fleks d.o.o., Ljubljana. Available at: https://urn.nsk.hr/urn:nbn:hr:115:521645 (Accessed 12 August 2024)

Jandrlić I, Kozina F, Brlić T, Mrkobrada L. Changes in structure and properties of copper wire during the production and processing. In: M. Jan Blažič, ed. Abstract Proceedings 62nd IFC Portorož 2022. Ljubljana: Tisk Fleks d.o.o.; 2022. [cited 2024 August 12] Available at: https://urn.nsk.hr/urn:nbn:hr:115:521645

I. Jandrlić, F. Kozina, T. Brlić and L. Mrkobrada, "Changes in structure and properties of copper wire during the production and processing", Abstract Proceedings 62nd IFC Portorož 2022, M. Jan Blažič, Ed. Ljubljana: Tisk Fleks d.o.o., 2022. [Online] Available at: https://urn.nsk.hr/urn:nbn:hr:115:521645 [Accessed: 12 August 2024]

Metadata
Title (english)Changes in structure and properties of copper wire during the production and processing
AuthorIvan Jandrlić
AuthorFranjo Kozina
AuthorTin Brlić
AuthorLorena Mrkobrada
EditorMrjam Jan-Blažič
Author's institutionUniversity of Zagreb
Faculty of Metallurgy
(Department of Mechanical Metallurgy)
(Laboratory of Deformation Metal Processing)
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Metallurgy
Abstract (english)
Irreplaceability of copper, as an electrical conductor, makes it the most important non-ferrous metal in application. The most frequently used methods of producing the copper conductors involves continuous casting of the copper wire, subsequent cold drawing deformation and heat treatment processes to improve copper mechanical and electrical properties. In this paper the research was performed on copper wire produced by continuous casting. During production various structural changes and changes in mechanical properties occur. To investigate those changes and to clarify their influence on final product, structure and hardness were recorded and measured in all stages of production. While macrostructure and microstructure were observed by light microscopy, the hardness was measured using Vickers hardness testing method. The results indicate that the initial coarse-grained structure in as-cast condition, brakes down into a fine- grained structure during reduction. Those fine grains are orientated in the direction of cold drawing during plastic deformation. There is an increase in the hardness. The purpose of heat treatment is to achieve better conductivity while maintaining good mechanical properties. The results of microstructure analysis indicate the presence of twin crystals in the structure of the final product
Keywords (english)
Languageenglish
Publication typeScientific paper - Original scientific paper
Publication statusPublished
Peer reviewPeer review - international
Publication versionPublished version
Publication titleAbstract Proceedings 62nd IFC Portorož 2022
Numbering41
ISBN978-961-94793-5-3
URN:NBNurn:nbn:hr:115:521645
Publication2022-09
ProjectNumber: KK.01.1.1.02.0020
Title (croatian): Centar za ljevarstvo - SIMET
Title (english): Center for casting - SIMET
Acronym: SIMET
Leader: Zdenka Zovko Brodarac
Jurisdiction: Croatia
Funding stream: European Regional Development Fund
ProjectNumber: KK.01.1.1.02.0022
Title (croatian): Virtulab – Integrirani laboratorij za primarne i sekundarne sirovine
Acronym: Virtulab
Jurisdiction: Croatia
Funding stream: European Regional Development Fund
ConferenceTitle: 62nd IFC PORTOROZ 2023
Location: Portorož, Slovenia
Organizer: Slovenian foundrymen society
Start date: 2022-09-14
End date: 2022-09-16
Assembly type: Lecture
Type of resourceText
PublisherTisk Fleks d.o.o.
Publishing placeLjubljana
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2024-04-24 12:01:45