prikaz prve stranice dokumenta Influence of cooling rate on microstructure development of AlSi9MgMn alloy
  Download
PDF 4.96 MB
Scientific paper - Original scientific paper
Influence of cooling rate on microstructure development of AlSi9MgMn alloy
Journal of Mining and Metallurgy, Section B, Metallurgy, 56 (2020), 3; 405-413. urn:nbn:hr:115:995703
Stanić, Davor; Zovko Brodarac, Zdenka

Institutional repository: Repository of Faculty of Metallurgy University of Zagreb

Cite this document

Stanić, D. & Zovko Brodarac, Z. (2020). Influence of cooling rate on microstructure development of AlSi9MgMn alloy. Journal of Mining and Metallurgy, Section B, Metallurgy, 56. (3), 405-413. Retrieved from https://urn.nsk.hr/urn:nbn:hr:115:995703

Stanić, Davor and Zdenka Zovko Brodarac. "Influence of cooling rate on microstructure development of AlSi9MgMn alloy." Journal of Mining and Metallurgy, Section B, Metallurgy, vol. 56, no. 3, 2020, pp. 405-413. https://urn.nsk.hr/urn:nbn:hr:115:995703

Stanić, Davor and Zdenka Zovko Brodarac. "Influence of cooling rate on microstructure development of AlSi9MgMn alloy." Journal of Mining and Metallurgy, Section B, Metallurgy 56, no. 3 (2020): 405-413. https://urn.nsk.hr/urn:nbn:hr:115:995703

Stanić, D. and Zovko Brodarac, Z. (2020) 'Influence of cooling rate on microstructure development of AlSi9MgMn alloy', Journal of Mining and Metallurgy, Section B, Metallurgy, 56(3), pp. 405-413. Available at: https://urn.nsk.hr/urn:nbn:hr:115:995703 (Accessed 23 November 2024)

Stanić D, Zovko Brodarac Z. Influence of cooling rate on microstructure development of AlSi9MgMn alloy. Journal of Mining and Metallurgy, Section B, Metallurgy [Internet]. 2020 [cited 2024 November 23];56(3):405-413. Available at: https://urn.nsk.hr/urn:nbn:hr:115:995703

D. Stanić and Z. Zovko Brodarac, "Influence of cooling rate on microstructure development of AlSi9MgMn alloy", Journal of Mining and Metallurgy, Section B, Metallurgy, vol. 56, no. 3, pp. 405-413, 2020. [Online]. Available at: https://urn.nsk.hr/urn:nbn:hr:115:995703. [Accessed: 23 November 2024]

Metadata
Title (english)Influence of cooling rate on microstructure development of AlSi9MgMn alloy
AuthorDavor Stanić
AuthorZdenka Zovko Brodarac
Author's institutionUniversity of Zagreb
Faculty of Metallurgy
(Department of Process Metallurgy)
(Laboratory of Iron, Steel and Founding)
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Metallurgy
Abstract (english)
Aluminum alloys are widely applied in automotive, aircraft, food, and building industries. Multicomponent technical AlSi9MgMn alloy is primarily intended for high cooling rate technology. Controlled addition of alloying elements such as iron and manganese as well as magnesium can improve mechanical and technological properties of the final casting depending on the cooling conditions during solidification. The aim of this investigation is the characterization of AlSi9MgMn alloy microstructure and mechanical properties at lower cooling rates than those for which this alloy was primarily developed. Thermodynamic calculation and thermal analyses revealed solidification sequence in correlation to the microstructure investigation as follows: development of primary dendrite network, precipitation of high temperature Al15(Mn,Fe)3Si2 and Al5FeSi phases, main eutectic reaction, precipitation of intermetallic Al8Mg3FeSi6 phase, and Mg2Si as a final solidifying phase. Influence of microstructure features investigation and cooling rate reveals significant Al15(Mn,Fe)3Si2 morphology change from Chinese script morphology at low, irregular broken Chinese script morphology at medium, and globular morphology at high cooling rate. High manganese content in AlSi9MgMn alloy together with high cooling rate enables the increase of Fe+Mn total amount in the intermetallic Al15(Mn,Fe)3Si2 phase and encourage favourable morphology development, all resulting in enhanced mechanical properties in as-cast state.
Keywords (english)
Languageenglish
Publication typeScientific paper - Original scientific paper
Publication statusPublished
Peer reviewPeer review - international
Publication versionPublished version
Journal titleJournal of Mining and Metallurgy, Section B, Metallurgy
Numberingvol. 56, no. 3, pp. 405-413
p-ISSN1450-5339
e-ISSN2217-7175
URN:NBNurn:nbn:hr:115:995703
Publication2020
Document URLchrome-extension://efaidnbmnnnibpcajpcglclefindmkaj/https://jmmab.com/wp-content/uploads/2020/12/1450-53392000036S-cf2.pdf
Type of resourceText
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2024-04-26 11:42:25