prikaz prve stranice dokumenta The effect of annealing time on microstructure and impact energy of stainless steel AISI 316L
  Download
PDF 3.95 MB
Professional paper - Professional paper
The effect of annealing time on microstructure and impact energy of stainless steel AISI 316L
Zavarivanje, 64 (2021), 3-4; 79-86. urn:nbn:hr:115:773465
Kožuh, Stjepan; Pavičić, Katarina; Ivanić, Ivana; Bizjak, Milan; Gojić, Mirko

Institutional repository: Repository of Faculty of Metallurgy University of Zagreb

Cite this document

Kožuh, S., Pavičić, K., Ivanić, I., Bizjak, M. & Gojić, M. (2021). The effect of annealing time on microstructure and impact energy of stainless steel AISI 316L. Zavarivanje, 64. (3-4), 79-86. Retrieved from https://urn.nsk.hr/urn:nbn:hr:115:773465

Kožuh, Stjepan, et al. "The effect of annealing time on microstructure and impact energy of stainless steel AISI 316L." Zavarivanje, vol. 64, no. 3-4, 2021, pp. 79-86. https://urn.nsk.hr/urn:nbn:hr:115:773465

Kožuh, Stjepan, Katarina Pavičić, Ivana Ivanić, Milan Bizjak and Mirko Gojić. "The effect of annealing time on microstructure and impact energy of stainless steel AISI 316L." Zavarivanje 64, no. 3-4 (2021): 79-86. https://urn.nsk.hr/urn:nbn:hr:115:773465

Kožuh, S., et al. (2021) 'The effect of annealing time on microstructure and impact energy of stainless steel AISI 316L', Zavarivanje, 64(3-4), pp. 79-86. Available at: https://urn.nsk.hr/urn:nbn:hr:115:773465 (Accessed 12 January 2025)

Kožuh S, Pavičić K, Ivanić I, Bizjak M, Gojić M. The effect of annealing time on microstructure and impact energy of stainless steel AISI 316L. Zavarivanje [Internet]. 2021 [cited 2025 January 12];64(3-4):79-86. Available at: https://urn.nsk.hr/urn:nbn:hr:115:773465

S. Kožuh, K. Pavičić, I. Ivanić, M. Bizjak and M. Gojić, "The effect of annealing time on microstructure and impact energy of stainless steel AISI 316L", Zavarivanje, vol. 64, no. 3-4, pp. 79-86, 2021. [Online]. Available at: https://urn.nsk.hr/urn:nbn:hr:115:773465. [Accessed: 12 January 2025]

Metadata
Title (english)The effect of annealing time on microstructure and impact energy of stainless steel AISI 316L
AuthorStjepan Kožuh
AuthorKatarina Pavičić
AuthorIvana Ivanić
AuthorMilan Bizjak
AuthorMirko Gojić
Author's institutionUniversity of Zagreb
Faculty of Metallurgy
(Department of Physical Metallurgy)
(Laboratory of Materials Development and Application)
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Metallurgy
Physical Metallurgy
Abstract (english)
In this work the results of microstructural analysis and impact energy testing of austenitic stainless steel AISI 316L were carried out. Investigations were performed before and after annealing at 850 °C. Annealing time in this investigation varied from 30 to 90 minutes. After annealing, the samples were cooled in room temperature air. Microstructural analysis of initial rolled and different annealed states was performed by optical microscopy (OM) and scanning electron microscopy (SEM) equipped with device for energy dispersive spectroscopy (EDS). Impact tests were performed on Charpy V-notch specimens at room temperature. Initial rolled state of investigated steel showed the presence of typical elongated polygonal grains austenite and delta ferrite while annealed states showed the presence and evolution of sigma phase in microstructure. Impact energy value of initial rolled state was 260 J and by increasing annealing time it decreases.
Keywords (english)
Languageenglish
Publication typeProfessional paper - Professional paper
Publication statusPublished
Peer reviewPeer review - domestic
Publication versionPublished version
Journal titleZavarivanje
Numberingvol. 64, no. 3-4, pp. 79-86
p-ISSN0044-1902
URN:NBNurn:nbn:hr:115:773465
Publication2021
Type of resourceText
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2024-04-30 09:10:02