prikaz prve stranice dokumenta Utjecaj temperature žarenja na mikrostrukturu i tvrdoću AlSi10Mg dijelovaproizvedenih SLM aditivnim postupkom
  Download
PDF 1.68 MB
Scientific paper - Original scientific paper
Utjecaj temperature žarenja na mikrostrukturu i tvrdoću AlSi10Mg dijelovaproizvedenih SLM aditivnim postupkom
In: Conference Proceedings International conference on materials - corrosion, heat treatment, testing and tribology, 2021. / Stojanović, Ivan (Ed.). Zagreb: Zagreb: Hrvatsko društvo za zaštitu materijala (HDZaMa), 2021. pp. 369-375. urn:nbn:hr:115:369058
(Zagreb: Hrvatsko društvo za zaštitu materijala (HDZaMa)) Šolić, Sanja; Dolić, Natalija; Tropša, Vlado

Institutional repository: Repository of Faculty of Metallurgy University of Zagreb

Cite this document

Šolić, S., Dolić, N. & Tropša, V. (2021). Utjecaj temperature žarenja na mikrostrukturu i tvrdoću AlSi10Mg dijelovaproizvedenih SLM aditivnim postupkom. In I. Stojanović, (Ed.), Conference Proceedings International conference on materials - corrosion, heat treatment, testing and tribology, 2021 (pp. 369-375). Zagreb: Zagreb: Hrvatsko društvo za zaštitu materijala (HDZaMa). Retrieved from https://urn.nsk.hr/urn:nbn:hr:115:369058

Šolić, Sanja, et al. "Utjecaj temperature žarenja na mikrostrukturu i tvrdoću AlSi10Mg dijelovaproizvedenih SLM aditivnim postupkom." Conference Proceedings International conference on materials - corrosion, heat treatment, testing and tribology, 2021, edited by Ivan Stojanović, Zagreb: Hrvatsko društvo za zaštitu materijala (HDZaMa), 2021, pp. 369-375. https://urn.nsk.hr/urn:nbn:hr:115:369058

Šolić, Sanja, Natalija Dolić and Vlado Tropša. "Utjecaj temperature žarenja na mikrostrukturu i tvrdoću AlSi10Mg dijelovaproizvedenih SLM aditivnim postupkom." In Conference Proceedings International conference on materials - corrosion, heat treatment, testing and tribology, 2021, 369-375. Zagreb: Zagreb: Hrvatsko društvo za zaštitu materijala (HDZaMa), 2021. Accessed 2024 November 15. https://urn.nsk.hr/urn:nbn:hr:115:369058

Šolić, S., Dolić, N. and Tropša, V. (2021) 'Utjecaj temperature žarenja na mikrostrukturu i tvrdoću AlSi10Mg dijelovaproizvedenih SLM aditivnim postupkom', in Stojanović, I. (ed.), Conference Proceedings International conference on materials - corrosion, heat treatment, testing and tribology, 2021, Zagreb: Hrvatsko društvo za zaštitu materijala (HDZaMa), Zagreb, pp. 369-375. Available at: https://urn.nsk.hr/urn:nbn:hr:115:369058 (Accessed 15 November 2024)

Šolić S, Dolić N, Tropša V. Utjecaj temperature žarenja na mikrostrukturu i tvrdoću AlSi10Mg dijelovaproizvedenih SLM aditivnim postupkom. In: I. Stojanović, ed. Conference Proceedings International conference on materials - corrosion, heat treatment, testing and tribology, 2021. Zagreb: Zagreb: Hrvatsko društvo za zaštitu materijala (HDZaMa); 2021. Pp. 369-375. [cited 2024 November 15] Available at: https://urn.nsk.hr/urn:nbn:hr:115:369058

S. Šolić, N. Dolić and V. Tropša, "Utjecaj temperature žarenja na mikrostrukturu i tvrdoću AlSi10Mg dijelovaproizvedenih SLM aditivnim postupkom", Conference Proceedings International conference on materials - corrosion, heat treatment, testing and tribology, 2021, I. Stojanović, Ed. Zagreb: Zagreb: Hrvatsko društvo za zaštitu materijala (HDZaMa), 2021. [Online] Available at: https://urn.nsk.hr/urn:nbn:hr:115:369058 [Accessed: 15 November 2024]

Metadata
Title (croatian)Utjecaj temperature žarenja na mikrostrukturu i tvrdoću AlSi10Mg dijelovaproizvedenih SLM aditivnim postupkom
AuthorSanja Šolić
AuthorNatalija Dolić
AuthorVlado Tropša
EditorIvan Stojanović
CollaborationZagreb: Hrvatsko društvo za zaštitu materijala (HDZaMa)
Author's institutionUniversity of Zagreb
Faculty of Metallurgy
(Department of Process Metallurgy)
(Laboratory of Iron, Steel and Founding)
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Production Mechanical Engineering
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Metallurgy
Process Metallurgy
Abstract (croatian)
SLM proizvodnja Co-Cr dentalnih legura je relativno novo područje inženjerstva materijala. Utjecaj pojedinih parametara SLM postupka na strukturu i svojstva konsolidiranih Co-Cr dentalnih legura i njihova interakcija predstavlja važno područje za istraživanje. Preliminarna istraživanja koja su provedena na proporcionalnim uzorcima izrađenima od istog komercijalnog praha Co-Cr legure SLM postupkom na strojevima različitih proizvođača koristeći preporučene parametre postupka pokazala su velike razlike u mikrostrukturi dobivenih uzoraka te značajna rasipanja vrijednosti mehaničkih svojstava konsolidiranog materijala (vlačna i savojna čvrstoća, istezanje i žilavost). Rasipanja rezultata nisu uočena samo između uzoraka izrađenih na različitim strojevima, već i između uzoraka različitih šarži na istom stroju. Dobiveni rezultati preliminarnih istraživanja pokazuju da u samoj proizvodnji Co-Cr legura SLM postupkom dolazi do utjecaja pojedinih parametara koji značajno utječu na kvalitetu dobivenog proizvoda. Ta povezanost glavnih tehnoloških parametara SLM proizvodnje sa strukturom i svojstvima proizvoda i njihova interakcija je velikim dijelom nepoznato područje i predstavlja veliki znanstveno istraživački potencijal, gdje rezultati istraživanja mogu doprinijeti optimizaciji strukture i svojstava dentalnih Co-Cr legura. U ovom istraživanju planira se napraviti ispitivanje utjecaja pojedinih parametara DSLM postupka, i to snage lasera te brzine taljenja na mehanička svojstva (vlačnu, tlačnu i savojnu čvrstoću) Co-Cr legure za dentalnu namjenu. Također će se napraviti i analiza mikrostrukture kojom će se utvrditi utjecaj pojedinih parametara na ispitivana mehanička svojstva.
Abstract (english)
SLM production of Co-Cr dental alloys is a relatively new field of materials engineering. The influence of individual parameters of the SLM procedure on the structure and properties of consolidated Co-Cr dental alloys and their interaction is an important area for research. Preliminary studies conducted on proportional samples made of the same commercial powder Co-Cr alloy SLM process on machines of different manufacturers using the recommended process parameters showed large differences in the microstructure of the obtained samples and significant differences in mechanical properties of consolidated material (tensile and flexural strength, elongation and toughness). Scattering of the results was observed not only between samples made on different machines, but also between samples of different batches on the same machine. The obtained results of preliminary research show that in the production of Co-Cr alloys by SLM process there is an influence of certain parameters that significantly affect the quality of the obtained product. This connection of the main technological parameters of SLM production with the structure and properties of products and their interaction is largely an unknown area and represents great scientific research potential, where research results can contribute to optimizing the structure and properties of dental Co-Cr alloys. In this research, it is planned to examine the influence of certain parameters of the DSLM procedure, namely laser power and melting rate on the mechanical properties (tensile, compressive and flexural strength) of Co-Cr alloy for dental purposes. A microstructure analysis will also be performed to determine the influence of individual parameters on the examined mechanical properties.
Keywords (croatian)
Keywords (english)
Languagecroatian
Publication typeScientific paper - Original scientific paper
Publication statusPublished
Peer reviewPeer review - international
Publication versionSubmitted version
Publication titleConference Proceedings International conference on materials - corrosion, heat treatment, testing and tribology, 2021
Numberingpp. 369-375
p-ISSN2584-4334
URN:NBNurn:nbn:hr:115:369058
Publication2021
ConferenceTitle: 3rd International Conference on Materials: corrosion, heat treatment, materials testing and tribology (MTECH 2021)
Location: Šibenik, Croatia
Start date: 2021-10-06
End date: 2021-10-09
Assembly type: Lecture
Type of resourceText
PublisherZagreb: Hrvatsko društvo za zaštitu materijala (HDZaMa)
Publishing placeZagreb
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2024-05-02 07:49:02