prikaz prve stranice dokumenta Quality assessment of the AlSi9Cu3(Fe) alloy with regard to recycling ratio
Access restricted to students and staff of home institution
Scientific paper - Original scientific paper
Quality assessment of the AlSi9Cu3(Fe) alloy with regard to recycling ratio
In: Congress Proceedings - 5th Metallurgical & Materials Engineering Congress of South-East Europe. / Sokić, Miroslav; Marković, Branislav; Manojlović, Vaso. (Ed.). Beograd, Srbija: Association of Metallurgical Engineers of Serbia (AMES), 2023. pp. 251-256. urn:nbn:hr:115:381610
Zovko Brodarac, Zdenka; Kozina, Franjo; Stanić, Davor; Folta, Martin.

Institutional repository: Repository of Faculty of Metallurgy University of Zagreb

Cite this document

Zovko Brodarac, Z., Kozina, F., Stanić, D. & Folta, M. (2023). Quality assessment of the AlSi9Cu3(Fe) alloy with regard to recycling ratio. In M. Sokić, (Ed.), B. Marković, (Ed.), V. Manojlović, (Ed.), Congress Proceedings - 5th Metallurgical & Materials Engineering Congress of South-East Europe (pp. 251-256). Beograd, Srbija: Association of Metallurgical Engineers of Serbia (AMES). Retrieved from https://urn.nsk.hr/urn:nbn:hr:115:381610

Zovko Brodarac, Zdenka, et al. "Quality assessment of the AlSi9Cu3(Fe) alloy with regard to recycling ratio." Congress Proceedings - 5th Metallurgical & Materials Engineering Congress of South-East Europe, edited by Miroslav Sokić, edited by Branislav Marković, edited by Vaso. Manojlović, Association of Metallurgical Engineers of Serbia (AMES), 2023, pp. 251-256. https://urn.nsk.hr/urn:nbn:hr:115:381610

Zovko Brodarac, Zdenka, Franjo Kozina, Davor Stanić and Martin. Folta. "Quality assessment of the AlSi9Cu3(Fe) alloy with regard to recycling ratio." In Congress Proceedings - 5th Metallurgical & Materials Engineering Congress of South-East Europe, 251-256. Beograd, Srbija: Association of Metallurgical Engineers of Serbia (AMES), 2023. Accessed 2024 November 26. https://urn.nsk.hr/urn:nbn:hr:115:381610

Zovko Brodarac, Z., et al. (2023) 'Quality assessment of the AlSi9Cu3(Fe) alloy with regard to recycling ratio', in Sokić, M. (ed.), Marković, B. (ed.), Manojlović, V. (ed.), Congress Proceedings - 5th Metallurgical & Materials Engineering Congress of South-East Europe, Association of Metallurgical Engineers of Serbia (AMES), Beograd, Srbija, pp. 251-256. Available at: https://urn.nsk.hr/urn:nbn:hr:115:381610 (Accessed 26 November 2024)

Zovko Brodarac Z, Kozina F, Stanić D, Folta M. Quality assessment of the AlSi9Cu3(Fe) alloy with regard to recycling ratio. In: M. Sokić, ed., B. Marković, ed., V. Manojlović, ed. Congress Proceedings - 5th Metallurgical & Materials Engineering Congress of South-East Europe. Beograd, Srbija: Association of Metallurgical Engineers of Serbia (AMES); 2023. Pp. 251-256. [cited 2024 November 26] Available at: https://urn.nsk.hr/urn:nbn:hr:115:381610

Z. Zovko Brodarac, F. Kozina, D. Stanić and M. Folta, "Quality assessment of the AlSi9Cu3(Fe) alloy with regard to recycling ratio", Congress Proceedings - 5th Metallurgical & Materials Engineering Congress of South-East Europe, M. Sokić, B. Marković and V. Manojlović, Eds. Beograd, Srbija: Association of Metallurgical Engineers of Serbia (AMES), 2023. [Online] Available at: https://urn.nsk.hr/urn:nbn:hr:115:381610 [Accessed: 26 November 2024]

Metadata
Title (english)Quality assessment of the AlSi9Cu3(Fe) alloy with regard to recycling ratio
AuthorZdenka Zovko Brodarac
AuthorFranjo Kozina
AuthorDavor Stanić
AuthorMartin. Folta
EditorMiroslav Sokić
EditorBranislav Marković
EditorVaso. Manojlović
Author's institutionUniversity of Zagreb
Faculty of Metallurgy
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Metallurgy
Process Metallurgy
Abstract (english)
The most common aluminum alloy in automotive industry is the AlSi9Cu3(Fe) alloy due to relatively high mechanical properties, fluidity and resistance to hot cracking. The mechanical properties of aluminium cast alloys are strongly dependent from the microstructure developed on the base of chemical composition and casting process with the emphasis on solidification sequence. Green production is an imperative in nowadays industry. Usage of secondary charge material comprehend to the green production certification with 0% CO2 footprint when own return has been used. Maintaining the alloy quality with regard to functional properties while promoting green production makes economical production imperative. In this research, modeling of the solidification sequence in equilibrium and non-equilibrium conditions was carried out and compared with the obtained microstructure for a conventional AlSi9Cu3(Fe) alloy and alloy made of 100% return charge material. Modelled equilibrium phase diagram enables solidification sequence prediction which can be easily confirmed using metallographic analysis. Modeling of solidification sequence revealed some differences in solidification path. Microstructural investigation of obtained samples confirms the presence of following phases: primary aluminium evolution (αAl), iron phases (Al5FeSi, Alx(Fe,Mn)yCuuSiw), primary eutectic phase (αAl+βSi) as well as other intermetallic phases as Al7Cu2Mg, Al5Mg8Si6Cu2, Al2Cu and Al8Mg5FeSi2. The comparison of the obtained results indicates a lowering of the main alloying element Si and thus an influence on the displacement of the solidification sequence equilibrium. Despite the observed differences in the solidification path, the comparison of the microstructures for both cases (conventional and 100% return alloy) does not reveal a degradation in the quality of the alloy. The quality assessment thus indicates that production with 100% recycled AlSi9Cu3(Fe) charge material meets all functional properties in the automotive industry.
Keywords (english)
Languageenglish
Publication typeScientific paper - Original scientific paper
Publication statusPublished
Peer reviewPeer review - international
Publication versionPublished version
Publication titleCongress Proceedings - 5th Metallurgical & Materials Engineering Congress of South-East Europe
Numberingpp. 251-256
ISBN978-86-87183-32-2
URN:NBNurn:nbn:hr:115:381610
Publication2023
ProjectNumber: KK.01.1.1.02.0020
Title (croatian): Centar za ljevarstvo - SIMET
Title (english): Center for casting - SIMET
Acronym: SIMET
Leader: Zdenka Zovko Brodarac
Jurisdiction: Croatia
Funding stream: European Regional Development Fund
ProjectNumber: KK.01.1.1.02.0022
Title (croatian): Virtulab – Integrirani laboratorij za primarne i sekundarne sirovine
Acronym: Virtulab
Leader: Sibila Borojević Šoštarić; Zdenka Zovko Brodarac (MF)
Jurisdiction: Croatia
Funding stream: European Regional Development Fund
ConferenceTitle: 5th Metallurgical & Materials Engineering Congress of South-East Europe
Acronym: MME SEE 2023
Location: Trebinje, Bosnia and Herzegovina
Organizer: Association of Metallurgical Engineers of Serbia (AMES)
Start date: 2023-06-07
End date: 2023-06-10
Assembly type: Lecture
Type of resourceText
PublisherAssociation of Metallurgical Engineers of Serbia (AMES)
Publishing placeBeograd, Srbija
Access conditionsInstitutional access
Terms of useLicence In copyright icon
Created on2024-05-03 14:44:42