prikaz prve stranice dokumenta Recycling potential of AlSi9Cu3(Fe) alloy
Access restricted to students and staff of home institution
Scientific paper - Original scientific paper
Recycling potential of AlSi9Cu3(Fe) alloy
In: Conference Proceedings 61st International Foundry Conference Portorož 2021. / Križman, Alojz; Mrvar, Primož; Medved, Jožef; Rudolf, Rebeka; Petrič, Mitja; Bühring-Polaczek, Andreas; Schumacher, Peter; Murrell, Pam; Sobczak, Jerzy; Marković, Srđan (Ed.). Ljubljana, Slovenija: Slovenian Foundry Society, 2021. pp. 1-8. urn:nbn:hr:115:087500
Zovko Brodarac, Zdenka; Stanić, Davor; Folta, Martin; Kozina, Franjo

Institutional repository: Repository of Faculty of Metallurgy University of Zagreb

Cite this document

Zovko Brodarac, Z., Stanić, D., Folta, M. & Kozina, F. (2021). Recycling potential of AlSi9Cu3(Fe) alloy. In A. Križman, (Ed.), P. Mrvar, (Ed.), J. Medved, (Ed.), R. Rudolf, (Ed.), M. Petrič, (Ed.), A. Bühring Polaczek, (Ed.), P. Schumacher, (Ed.), P. Murrell, (Ed.), J. Sobczak, (Ed.), S. Marković, (Ed.), Conference Proceedings 61st International Foundry Conference Portorož 2021 (pp. 1-8). Ljubljana, Slovenija: Slovenian Foundry Society. Retrieved from https://urn.nsk.hr/urn:nbn:hr:115:087500

Zovko Brodarac, Zdenka, et al. "Recycling potential of AlSi9Cu3(Fe) alloy." Conference Proceedings 61st International Foundry Conference Portorož 2021, edited by Alojz Križman, edited by Primož Mrvar, edited by Jožef Medved, edited by Rebeka Rudolf, edited by Mitja Petrič, edited by Andreas Bühring Polaczek, edited by Peter Schumacher, edited by Pam Murrell, edited by Jerzy Sobczak, edited by Srđan Marković, Slovenian Foundry Society, 2021, pp. 1-8. https://urn.nsk.hr/urn:nbn:hr:115:087500

Zovko Brodarac, Zdenka, Davor Stanić, Martin Folta and Franjo Kozina. "Recycling potential of AlSi9Cu3(Fe) alloy." In Conference Proceedings 61st International Foundry Conference Portorož 2021, 1-8. Ljubljana, Slovenija: Slovenian Foundry Society, 2021. Accessed 2024 June 26. https://urn.nsk.hr/urn:nbn:hr:115:087500

Zovko Brodarac, Z., et al. (2021) 'Recycling potential of AlSi9Cu3(Fe) alloy', in Križman, A. (ed.), Mrvar, P. (ed.), Medved, J. (ed.), Rudolf, R. (ed.), Petrič, M. (ed.), Bühring Polaczek, A. (ed.), Schumacher, P. (ed.), Murrell, P. (ed.), Sobczak, J. (ed.), Marković, S. (ed.), Conference Proceedings 61st International Foundry Conference Portorož 2021, Slovenian Foundry Society, Ljubljana, Slovenija, pp. 1-8. Available at: https://urn.nsk.hr/urn:nbn:hr:115:087500 (Accessed 26 June 2024)

Zovko Brodarac Z, Stanić D, Folta M, Kozina F. Recycling potential of AlSi9Cu3(Fe) alloy. In: A. Križman, ed., P. Mrvar, ed., J. Medved, ed., R. Rudolf, ed., M. Petrič, ed., A. Bühring Polaczek, ed., P. Schumacher, ed., P. Murrell, ed., J. Sobczak, ed., S. Marković, ed. Conference Proceedings 61st International Foundry Conference Portorož 2021. Ljubljana, Slovenija: Slovenian Foundry Society; 2021. Pp. 1-8. [cited 2024 June 26] Available at: https://urn.nsk.hr/urn:nbn:hr:115:087500

Z. Zovko Brodarac, D. Stanić, M. Folta and F. Kozina, "Recycling potential of AlSi9Cu3(Fe) alloy", Conference Proceedings 61st International Foundry Conference Portorož 2021, A. Križman et al., Eds. Ljubljana, Slovenija: Slovenian Foundry Society, 2021. [Online] Available at: https://urn.nsk.hr/urn:nbn:hr:115:087500 [Accessed: 26 June 2024]

Metadata
Title (english)Recycling potential of AlSi9Cu3(Fe) alloy
AuthorZdenka Zovko Brodarac
AuthorDavor Stanić
AuthorMartin Folta
AuthorFranjo Kozina
EditorAlojz Križman
EditorPrimož Mrvar
EditorJožef Medved
EditorRebeka Rudolf
EditorMitja Petrič
EditorAndreas Bühring-Polaczek
EditorPeter Schumacher
EditorPam Murrell
EditorJerzy Sobczak
EditorSrđan Marković
Author's institutionUniversity of Zagreb
Faculty of Metallurgy
(Department of Process Metallurgy)
(Laboratory of Iron, Steel and Founding)
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Metallurgy
Process Metallurgy
Abstract (english)
Standard aluminium alloy AlSi9Cu3(Fe) (EN AC 46000) is the most common Al-alloy used to produce castings with high-pressure casting technology and has wide application in the automotive industry, especially for motor mounts, gearbox housings, filter housings, generator housing, turbocharger housing, etc. The advantages of AlSi9Cu3(Fe) alloy are relatively high mechanical properties, strength and hardness, although it shows slightly lower elongation and corrosion resistance. The mechanical and microstructural properties of aluminium cast alloys are dependent from the composition, melt treatment, solidification rate, casting process and from potential heat treatment. This paper investigates the recycling potential of AlSi9Cu3(Fe) alloy using own return material from foundry without any additions. The presence of wide range of alloying elements AlSi9Cu3(Fe) alloys reveals number of potential phases such as α-Al15(FeMn)3Si2, β-Al5FeSi, Mg2Si, Al2Cu and even more complex one such as Al15Cu2Mg8Si6 and Al5Mg8Cu2Si6. Remelting of recycled aluminium cast alloys influence on the change of microstructure development through the solidification process and therefore lead to the degradation of mechanical properties.
Keywords (english)
Languageenglish
Publication typeScientific paper - Original scientific paper
Publication statusPublished
Peer reviewUnknown
Publication versionPublished version
Publication titleConference Proceedings 61st International Foundry Conference Portorož 2021
Numberingpp. 1-8, 24
ISBN978-961-94793-3-9
URN:NBNurn:nbn:hr:115:087500
Publication2021
ProjectNumber: KK.01.1.1.02.0020
Title (croatian): Centar za ljevarstvo - SIMET
Title (english): Center for casting - SIMET
Acronym: SIMET
Leader: Zdenka Zovko Brodarac
Jurisdiction: Croatia
Funding stream: European Regional Development Fund
ProjectNumber: KK.01.1.1.02.0022
Title (croatian): Virtulab – Integrirani laboratorij za primarne i sekundarne sirovine
Acronym: Virtulab
Leader: Sibila Borojević Šoštarić; Zdenka Zovko Brodarac (MF)
Jurisdiction: Croatia
Funding stream: European Regional Development Fund
ConferenceTitle: 61st International Foundry Conference Portorož 2021
Acronym: IFC Portorož
Location: Portorož, Slovenia
Organizer: Slovenian Foundrymen Society
Start date: 2021-09-15
End date: 2021-09-17
Assembly type: Invited lecture
Type of resourceText
PublisherSlovenian Foundry Society
Publishing placeLjubljana, Slovenija
Access conditionsInstitutional access
Terms of useLicence In copyright icon
Created on2024-05-03 16:17:13