prikaz prve stranice dokumenta The Application of a Factorial Experiment with Repeated Measurements in the Investigation of Parameters Influencing the Properties of Niobium Microalloyed Cold Drawn Welded Steel Tubes
No public access
Scientific paper - Original scientific paper
The Application of a Factorial Experiment with Repeated Measurements in the Investigation of Parameters Influencing the Properties of Niobium Microalloyed Cold Drawn Welded Steel Tubes
Transactions of FAMENA, 43 (2020), 4; 17-26. https://doi.org/10.21278/TOF.43402
Rešković, Stoja; Grizelj, Branko; Brlić, Tin; Balenović, Marijan

Institutional repository: Repository of Faculty of Metallurgy University of Zagreb

Cite this document

Rešković, S., Grizelj, B., Brlić, T. & Balenović, M. (2020). The Application of a Factorial Experiment with Repeated Measurements in the Investigation of Parameters Influencing the Properties of Niobium Microalloyed Cold Drawn Welded Steel Tubes. Transactions of FAMENA, 43. (4), 17-26. doi: 10.21278/TOF.43402

Rešković, Stoja, et al. "The Application of a Factorial Experiment with Repeated Measurements in the Investigation of Parameters Influencing the Properties of Niobium Microalloyed Cold Drawn Welded Steel Tubes." Transactions of FAMENA, vol. 43, no. 4, 2020, pp. 17-26. https://doi.org/10.21278/TOF.43402

Rešković, Stoja, Branko Grizelj, Tin Brlić and Marijan Balenović. "The Application of a Factorial Experiment with Repeated Measurements in the Investigation of Parameters Influencing the Properties of Niobium Microalloyed Cold Drawn Welded Steel Tubes." Transactions of FAMENA 43, no. 4 (2020): 17-26. https://doi.org/10.21278/TOF.43402

Rešković, S., et al. (2020) 'The Application of a Factorial Experiment with Repeated Measurements in the Investigation of Parameters Influencing the Properties of Niobium Microalloyed Cold Drawn Welded Steel Tubes', Transactions of FAMENA, 43(4), pp. 17-26. doi: 10.21278/TOF.43402

Rešković S, Grizelj B, Brlić T, Balenović M. The Application of a Factorial Experiment with Repeated Measurements in the Investigation of Parameters Influencing the Properties of Niobium Microalloyed Cold Drawn Welded Steel Tubes. Transactions of FAMENA [Internet]. 2020 [cited 2024 June 29];43(4):17-26. doi: 10.21278/TOF.43402

S. Rešković, B. Grizelj, T. Brlić and M. Balenović, "The Application of a Factorial Experiment with Repeated Measurements in the Investigation of Parameters Influencing the Properties of Niobium Microalloyed Cold Drawn Welded Steel Tubes", Transactions of FAMENA, vol. 43, no. 4, pp. 17-26, 2020. [Online]. Available at: https://urn.nsk.hr/urn:nbn:hr:115:569448. [Accessed: 29 June 2024]

Metadata
Title (english)The Application of a Factorial Experiment with Repeated Measurements in the Investigation of Parameters Influencing the Properties of Niobium Microalloyed Cold Drawn Welded Steel Tubes
AuthorStoja Rešković
AuthorBranko Grizelj
AuthorTin Brlić
AuthorMarijan Balenović
Author's institutionUniversity of Slavonski Brod
(Mechanical Engineering Faculty in Slavonski Brod)
Author's institutionUniversity of Zagreb
Faculty of Metallurgy
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Metallurgy
Abstract (english)
It has been observed that inhomogeneous deformations occur at the beginning of the plastic material flow during the cold drawing of welded tubes and after the proportionality limit Rp has been reached. Therefore, it is important to determine the most influential factor at the beginning of the plastic material flow. Tests were carried out on a welded joint and on the base material. The study was performed on two steels with different contents of the microalloying element niobium. Tubes were drawn with two different degrees of reduction. The factorial experiment consisting of three factors at two levels 2^3 with repeated measurements showed that the degree of reduction has the greatest influence on the proportionality limit.
Keywords (english)
Languageenglish
Publication typeScientific paper - Original scientific paper
Publication statusPublished
Peer reviewPeer review - international
Publication versionPublished version
Journal titleTransactions of FAMENA
Numberingvol. 43, no. 4, pp. 17-26
p-ISSN1333-1124
e-ISSN1849-1391
DOIhttps://doi.org/10.21278/TOF.43402
URN:NBNurn:nbn:hr:115:569448
Publication2020
ProjectNumber: IP 2016-06-1270
Title (croatian): Istraživanja početka plastičnog toka metala kod hladne deformacije
Acronym: MFSRIP062016
Leader: Stoja Rešković
Jurisdiction: Croatia
Document URLhttps://hrcak.srce.hr/234308
Type of resourceText
Access conditionsClosed access
Terms of useLicence In copyright icon
Created on2024-05-04 14:30:13