prikaz prve stranice dokumenta Influence of Niobium Content on Strain Amount in Lüders Bands in Niobium Microalloyed Steel
No public access
Scientific paper - Original scientific paper
Influence of Niobium Content on Strain Amount in Lüders Bands in Niobium Microalloyed Steel
Metals and Materials International, 26 (2019), 2; 179-187. https://doi.org/10.1007/s12540-019-00336-w
Brlić, Tin; Rešković, Stoja; Jandrlić, Ivan

Institutional repository: Repository of Faculty of Metallurgy University of Zagreb

Cite this document

Brlić, T., Rešković, S. & Jandrlić, I. (2019). Influence of Niobium Content on Strain Amount in Lüders Bands in Niobium Microalloyed Steel. Metals and Materials International, 26. (2), 179-187. doi: 10.1007/s12540-019-00336-w

Brlić, Tin, et al. "Influence of Niobium Content on Strain Amount in Lüders Bands in Niobium Microalloyed Steel." Metals and Materials International, vol. 26, no. 2, 2019, pp. 179-187. https://doi.org/10.1007/s12540-019-00336-w

Brlić, Tin, Stoja Rešković and Ivan Jandrlić. "Influence of Niobium Content on Strain Amount in Lüders Bands in Niobium Microalloyed Steel." Metals and Materials International 26, no. 2 (2019): 179-187. https://doi.org/10.1007/s12540-019-00336-w

Brlić, T., Rešković, S. and Jandrlić, I. (2019) 'Influence of Niobium Content on Strain Amount in Lüders Bands in Niobium Microalloyed Steel', Metals and Materials International, 26(2), pp. 179-187. doi: 10.1007/s12540-019-00336-w

Brlić T, Rešković S, Jandrlić I. Influence of Niobium Content on Strain Amount in Lüders Bands in Niobium Microalloyed Steel. Metals and Materials International [Internet]. 2019 June 28 [cited 2024 June 28];26(2):179-187. doi: 10.1007/s12540-019-00336-w

T. Brlić, S. Rešković and I. Jandrlić, "Influence of Niobium Content on Strain Amount in Lüders Bands in Niobium Microalloyed Steel", Metals and Materials International, vol. 26, no. 2, pp. 179-187, June 2019. [Online]. Available at: https://urn.nsk.hr/urn:nbn:hr:115:997824. [Accessed: 28 June 2024]

Metadata
Title (english)Influence of Niobium Content on Strain Amount in Lüders Bands in Niobium Microalloyed Steel
AuthorTin Brlić
AuthorStoja Rešković
AuthorIvan Jandrlić
Author's institutionUniversity of Zagreb
Faculty of Metallurgy
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Metallurgy
Abstract (english)
In this paper, the influence of niobium content on strain amounts in various areas of Lüders bands propagation was investigated. The tests were simultaneously performed by a static tensile test and a digital image correlation in microalloyed steel with the same base chemical composition but with different addition of 0.035% and 0.06% of niobium. Strain changes were determined by a qualitative and quantitative analysis using a digital image correlation in the area of maximum strain amount behind the Lüders band front (position 1), on the Lüders band front (position 2) and in front of the Lüders band front (position 3). Different deformation behavior of Lüders bands was found in the examined samples with different addition of microalloying element niobium. The area behind the Lüders band front (position 1) showed the highest strain amounts in relation to the other two examined areas. The steel with 0.035% of niobium indicates higher strain amounts in the area of maximum strain behind the Lüders band front (position 1) compared to the steel with 0.06% of niobium which is associated with dislocation density and grain size. This difference is lower on the Lüders band front (position 2) and in front of the Lüders band front (position 3). There were no significant changes in the strain amount with the change of niobium content.
Keywords (english)
Languageenglish
Publication typeScientific paper - Original scientific paper
Publication statusPublished
Peer reviewPeer review - international
Publication versionPublished version
Journal titleMetals and Materials International
Numberingvol. 26, no. 2, pp. 179-187
p-ISSN1598-9623
e-ISSN2005-4149
DOIhttps://doi.org/10.1007/s12540-019-00336-w
URN:NBNurn:nbn:hr:115:997824
Publication2019-06-28
ProjectNumber: IP-2016-06-1270
Title (croatian): Istraživanja početka plastičnog toka metala kod hladne deformacije
Acronym: MFSRIP062016
Leader: Stoja Rešković
Jurisdiction: Croatia
Funding stream: Research Projects
Document URLhttp://link.springer.com/10.1007/s12540-019-00336-w
Type of resourceText
Access conditionsClosed access
Terms of useLicence In copyright icon
Created on2024-05-04 15:34:39