prikaz prve stranice dokumenta Utjecaj vrste drva i pripreme površine drva na močenje
  Download
PDF 3.51 MB
master's thesis
Utjecaj vrste drva i pripreme površine drva na močenje
Zagreb: University of Zagreb, Faculty of Forestry and Wood Technology, 2022. urn:nbn:hr:108:772348
Pečarić, Kristijan
University of Zagreb
Faculty of Forestry and Wood Technology
Institute of Furniture and Wood in Construction

Institutional repository: University of Zagreb Faculty of Forestry and Wood Technology

Cite this document

Pečarić, K. (2022). Utjecaj vrste drva i pripreme površine drva na močenje (Master's thesis). Zagreb: University of Zagreb, Faculty of Forestry and Wood Technology. Retrieved from https://urn.nsk.hr/urn:nbn:hr:108:772348

Pečarić, Kristijan. "Utjecaj vrste drva i pripreme površine drva na močenje." Master's thesis, University of Zagreb, Faculty of Forestry and Wood Technology, 2022. https://urn.nsk.hr/urn:nbn:hr:108:772348

Pečarić, Kristijan. "Utjecaj vrste drva i pripreme površine drva na močenje." Master's thesis, University of Zagreb, Faculty of Forestry and Wood Technology, 2022. https://urn.nsk.hr/urn:nbn:hr:108:772348

Pečarić, K. (2022). 'Utjecaj vrste drva i pripreme površine drva na močenje', Master's thesis, University of Zagreb, Faculty of Forestry and Wood Technology, accessed 27 August 2024, https://urn.nsk.hr/urn:nbn:hr:108:772348

Pečarić K. Utjecaj vrste drva i pripreme površine drva na močenje [Master's thesis]. Zagreb: University of Zagreb, Faculty of Forestry and Wood Technology; 2022 [cited 2024 August 27] Available at: https://urn.nsk.hr/urn:nbn:hr:108:772348

K. Pečarić, "Utjecaj vrste drva i pripreme površine drva na močenje", Master's thesis, University of Zagreb, Faculty of Forestry and Wood Technology, Zagreb, 2022. Available at: https://urn.nsk.hr/urn:nbn:hr:108:772348

Metadata
TitleUtjecaj vrste drva i pripreme površine drva na močenje
Title (english)Influence of wood species and wood surface preparation on wood staining
AuthorKristijan Pečarić
MentorJosip Miklečić (mentor)
Committee memberJosip Miklečić (predsjednik povjerenstva)
Committee memberVlatka Jirouš Rajković (član povjerenstva)
Committee memberGoran Mihulja (član povjerenstva)
GranterUniversity of Zagreb
Faculty of Forestry and Wood Technology
(Institute of Furniture and Wood in Construction)
Zagreb
Defense date and country2022-07-08, Croatia
Scientific / art field,
discipline and subdiscipline		BIOTECHNICAL SCIENCES
Wood Technology
Abstract
U ovom diplomskom radu istraživao se utjecaj pripreme površine brušenjem na svojstva močene površine drva. Močenje je način promjene boje drva, a konačni efekt ovisi o velikom broju čimbenika. U istraživanju su korištene tri vrste drva, te vodena i otapalna močila s dodatkom bojila i pigmenata. Na uzorcima se mjerila dubina penetracije močila, promjena svjetline, sjaj te brzina upijanja močila. Rezultati su pokazali da su močila potamnila površinu drva, dok je otapalno močilo penetriralo je dublje u drvo u odnosu na vodeno močila. Nadalje, najbrže upijanje i najdublja penetracija močila zabilježena je na lipovini, dok je najmanja penetracija močila zabilježena na hrastovini.
Abstract (english)
In this thesis, the influence of surface preparation by sanding on the properties of the stained wood surfaces was studied. Staining is a way of changing the color of wood, and the final effect depends on a number of factors. Three types of wood species were used in the research, as well as water and solvent-based stains with the addition of dyes and pigments. The depth of stain penetration, lightness change, gloss and stain absorption rate were measured on the samples. The results showed that the stains darkened the wood surface, and the solvent-based stains penetrated deeper into the wood compared to the water-based stains. Furthermore, the fastest absorption and the deepest stain penetration were recorded on linden, while the lowest wetting penetration was recorded on oak.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:108:772348
Study programmeTitle: Wood Technology Processes
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka drvne tehnologije (magistar/magistra inženjer/inženjerka drvne tehnologije)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2022-07-13 12:31:30