prikaz prve stranice dokumenta Istraživanje konstrukcijskih spojeva kod kutno-plošnog sastavljanja
Access restricted to students and staff of home institution
master's thesis
Istraživanje konstrukcijskih spojeva kod kutno-plošnog sastavljanja
Zagreb: University of Zagreb, Faculty of Forestry, 2013. urn:nbn:hr:108:906696
Hadžić, Damir
University of Zagreb
Faculty of Forestry and Wood Technology
Institute of Furniture and Wood in Construction

Institutional repository: University of Zagreb Faculty of Forestry and Wood Technology

Cite this document

Hadžić, D. (2013). Istraživanje konstrukcijskih spojeva kod kutno-plošnog sastavljanja (Master's thesis). Zagreb: University of Zagreb, Faculty of Forestry and Wood Technology. Retrieved from https://urn.nsk.hr/urn:nbn:hr:108:906696

Hadžić, Damir. "Istraživanje konstrukcijskih spojeva kod kutno-plošnog sastavljanja." Master's thesis, University of Zagreb, Faculty of Forestry and Wood Technology, 2013. https://urn.nsk.hr/urn:nbn:hr:108:906696

Hadžić, Damir. "Istraživanje konstrukcijskih spojeva kod kutno-plošnog sastavljanja." Master's thesis, University of Zagreb, Faculty of Forestry and Wood Technology, 2013. https://urn.nsk.hr/urn:nbn:hr:108:906696

Hadžić, D. (2013). 'Istraživanje konstrukcijskih spojeva kod kutno-plošnog sastavljanja', Master's thesis, University of Zagreb, Faculty of Forestry and Wood Technology, accessed 06 January 2025, https://urn.nsk.hr/urn:nbn:hr:108:906696

Hadžić D. Istraživanje konstrukcijskih spojeva kod kutno-plošnog sastavljanja [Master's thesis]. Zagreb: University of Zagreb, Faculty of Forestry and Wood Technology; 2013 [cited 2025 January 06] Available at: https://urn.nsk.hr/urn:nbn:hr:108:906696

D. Hadžić, "Istraživanje konstrukcijskih spojeva kod kutno-plošnog sastavljanja", Master's thesis, University of Zagreb, Faculty of Forestry and Wood Technology, Zagreb, 2013. Available at: https://urn.nsk.hr/urn:nbn:hr:108:906696

Metadata
TitleIstraživanje konstrukcijskih spojeva kod kutno-plošnog sastavljanja
Title (english)Research of constructional joints in angled blade assembly
AuthorDamir Hadžić
MentorIvica Grbac (mentor)
Committee memberIvica Grbac
Committee memberIvica Župčić
Committee memberDanijela Domljan
GranterUniversity of Zagreb
Faculty of Forestry and Wood Technology
(Institute of Furniture and Wood in Construction)
Zagreb
Defense date and country2013-09-27, Croatia
Scientific / art field,
discipline and subdiscipline		BIOTECHNICAL SCIENCES
Wood Technology
Construction and Design of Wood Products
Abstract
Da bi namještaj bio kvalitetan, bitno je prije svega naglasiti da svi dijelovi koji se upotrebljavaju za izradu namještaja moraju biti kvalitetni. Mora se voditi računa o postizanju kvalitete konstrukcijskog sastava koji je ujedno i najvažniji faktor pri izradi namještaja, ali da se i odabere što kvalitetnija metoda izrade. U radu su prikazane dosadašnje svjetske spoznaje vezano za istraživanja o konstrukcijskim sastavima, te o njihovoj čvrstoći. Istraživanje je provedeno na uzorcima izrađenim od ploče iverice 18 mm debljine. Uzorci su bili dimenzija 100×100 mm, sastavljeni kutno plošnim sastavljanjem. Za izradu sastava koristio se bukov moždanik, lamelo umetak, konfirmat vijak, vijak za drvo, te svornjak za zakretnim klinom. Dobiveni rezultati istraživanja su statistički obrađeni, te će služiti za dalje kao pokazatelj utjecaja moždanika, vijka za drvo, konfirmat vijka, lamelo umetka, te svornjaka sa zakretnim klinom na čvrstoću spoja.
Abstract (english)
To have a good quality furniture, it is primarily to emphasize that all components used for making furniture must be of good quality. It must be taken into account to achieve the quality of the structural system, which is also the most important factor in making furniture, but also chooses the highest quality production methods. The paper presents the current knowledge regarding the world's research on the structural composition and their strength. Start the exploration is carried out on samples made of chipboard 18 mm thick. The samples were of dimensions 100 × 100 mm, composed angled blade assembly. To create a composition using beech dowels, wood biscuits, confirmat screw, screw for wood and portable fasteners. Research results have been statistically analyzed, and to continue to serve as an indicator of the impact of dowel, screws for wood, confirmat screws, wood biscuits and portable fasteners on the joint strength.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:108:906696
Study programmeTitle: Design of Wood Products
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka drvne tehnologije (magistar/magistra inženjer/inženjerka drvne tehnologije)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2016-01-15 14:11:15