prikaz prve stranice dokumenta Određivanje zapunjenosti pazušnog prostora kružne pile tijekom piljenja pomoću stroboskopa i digitalne kamere
Access restricted to students and staff of home institution
master's thesis
Određivanje zapunjenosti pazušnog prostora kružne pile tijekom piljenja pomoću stroboskopa i digitalne kamere
Zagreb: University of Zagreb, Faculty of Forestry, 2017. urn:nbn:hr:108:815815
Jovanović, Juraj
University of Zagreb
Faculty of Forestry and Wood Technology
Institute of Processes Engineering

Institutional repository: University of Zagreb Faculty of Forestry and Wood Technology

Cite this document

Jovanović, J. (2017). Određivanje zapunjenosti pazušnog prostora kružne pile tijekom piljenja pomoću stroboskopa i digitalne kamere (Master's thesis). Zagreb: University of Zagreb, Faculty of Forestry and Wood Technology. Retrieved from https://urn.nsk.hr/urn:nbn:hr:108:815815

Jovanović, Juraj. "Određivanje zapunjenosti pazušnog prostora kružne pile tijekom piljenja pomoću stroboskopa i digitalne kamere." Master's thesis, University of Zagreb, Faculty of Forestry and Wood Technology, 2017. https://urn.nsk.hr/urn:nbn:hr:108:815815

Jovanović, Juraj. "Određivanje zapunjenosti pazušnog prostora kružne pile tijekom piljenja pomoću stroboskopa i digitalne kamere." Master's thesis, University of Zagreb, Faculty of Forestry and Wood Technology, 2017. https://urn.nsk.hr/urn:nbn:hr:108:815815

Jovanović, J. (2017). 'Određivanje zapunjenosti pazušnog prostora kružne pile tijekom piljenja pomoću stroboskopa i digitalne kamere', Master's thesis, University of Zagreb, Faculty of Forestry and Wood Technology, accessed 28 November 2024, https://urn.nsk.hr/urn:nbn:hr:108:815815

Jovanović J. Određivanje zapunjenosti pazušnog prostora kružne pile tijekom piljenja pomoću stroboskopa i digitalne kamere [Master's thesis]. Zagreb: University of Zagreb, Faculty of Forestry and Wood Technology; 2017 [cited 2024 November 28] Available at: https://urn.nsk.hr/urn:nbn:hr:108:815815

J. Jovanović, "Određivanje zapunjenosti pazušnog prostora kružne pile tijekom piljenja pomoću stroboskopa i digitalne kamere", Master's thesis, University of Zagreb, Faculty of Forestry and Wood Technology, Zagreb, 2017. Available at: https://urn.nsk.hr/urn:nbn:hr:108:815815

Metadata
TitleOdređivanje zapunjenosti pazušnog prostora kružne pile tijekom piljenja pomoću stroboskopa i digitalne kamere
Title (english)Experimental determination of the gullet holding capacity with stroboscope and digital camera during sawing on circular saws
AuthorJuraj Jovanović
MentorIgor Đukić (mentor)
Committee memberIgor Đukić (predsjednik povjerenstva)
Committee memberJosip Ištvanić (član povjerenstva)
Committee memberMatija Jug (član povjerenstva)
GranterUniversity of Zagreb
Faculty of Forestry and Wood Technology
(Institute of Processes Engineering)
Zagreb
Defense date and country2017-07-14, Croatia
Scientific / art field,
discipline and subdiscipline		BIOTECHNICAL SCIENCES
Wood Technology
Abstract
U ovom diplomskom radu odabran je i analiziran predloženi mjerni lanac za mjerenje faktora rastresitosti pri piljenju na kružnoj pili. Kao mjerni lanac korišten je stroboskop i digitalni fotoaparat s mogućnošću snimanja videa. Dobiveni rezultati upućuju na upotrebljivost odabrane mjerne metode za analizu zapunjenosti pazušnog prostora lista pile piljevinom odmah nakon izlaska iz zahvata, iako su uočeni neki nedostatci pri obradi rezultata za koje su se dale preporuke u cilju poboljšanja i unapređenja korištenog mjernog postupka.
Abstract (english)
In this graduate thesis, the proposed measuring chain for measuring the looseness factor at the circular saw was selected and analyzed. As a metric chain, a stroboscope and a digital camera with the ability to record a video were used. The results that were obtained indicate the usefulness of the selected metering method for analyzing the gullet holding capacity of the saw blade with the saw blade immediately after the operation, although some shortcomings in the processing of the results for which recommendations were made in order to improve the measurement procedure.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:108:815815
Study programmeTitle: Wood Technology Processes
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka drvne tehnologije (magistar/magistra inženjer/inženjerka drvne tehnologije)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2017-08-01 11:06:39