prikaz prve stranice dokumenta Projektiranje e-jakne za bicikliste
No public access
master's thesis
Projektiranje e-jakne za bicikliste
Zagreb: University of Zagreb, Faculty of Textile Technology, 2018. urn:nbn:hr:201:916537
Peck-Tijeglić, Martina
University of Zagreb
Faculty of Textile Technology
Department of Clothing Technology

Institutional repository: Faculty of Textile Technology University of Zagreb - Digital Repository

Cite this document

Peck Tijeglić, M. (2018). Projektiranje e-jakne za bicikliste (Master's thesis). Zagreb: University of Zagreb, Faculty of Textile Technology. Retrieved from https://urn.nsk.hr/urn:nbn:hr:201:916537

Peck Tijeglić, Martina. "Projektiranje e-jakne za bicikliste." Master's thesis, University of Zagreb, Faculty of Textile Technology, 2018. https://urn.nsk.hr/urn:nbn:hr:201:916537

Peck Tijeglić, Martina. "Projektiranje e-jakne za bicikliste." Master's thesis, University of Zagreb, Faculty of Textile Technology, 2018. https://urn.nsk.hr/urn:nbn:hr:201:916537

Peck Tijeglić, M. (2018). 'Projektiranje e-jakne za bicikliste', Master's thesis, University of Zagreb, Faculty of Textile Technology, accessed 17 February 2025, https://urn.nsk.hr/urn:nbn:hr:201:916537

Peck Tijeglić M. Projektiranje e-jakne za bicikliste [Master's thesis]. Zagreb: University of Zagreb, Faculty of Textile Technology; 2018 [cited 2025 February 17] Available at: https://urn.nsk.hr/urn:nbn:hr:201:916537

M. Peck Tijeglić, "Projektiranje e-jakne za bicikliste", Master's thesis, University of Zagreb, Faculty of Textile Technology, Zagreb, 2018. Available at: https://urn.nsk.hr/urn:nbn:hr:201:916537

Metadata
TitleProjektiranje e-jakne za bicikliste
AuthorMartina Peck-Tijeglić
MentorSnježana Firšt Rogale (mentor)
Committee memberSlavenka Petrak (predsjednik povjerenstva)
Committee memberSnježana Firšt Rogale (član povjerenstva)
Committee memberIrena Šabarić (član povjerenstva)
GranterUniversity of Zagreb
Faculty of Textile Technology
(Department of Clothing Technology)
Zagreb
Defense date and country2018-09-28, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Textile Technology
Clothing Technology
Abstract
Prema današnjim važećim prometnim pravilima u većini država bicikl se smatra prometnim sredstvom, te je dakle biciklist ravnopravan sudionik u prometu. S obzirom na veliki broj korisnika ovog prijevoznog sredstva, potrebno je razmišljati o sigurnosti biciklista te na koji način možemo povećati sigurnost u prometu. U ovom radu opisano je jedno od mogućih rješenja za povećanje sigurnosti kada biciklisti žele skrenuti u određenom smjeru preko cestovnih prometnica gdje može doći do kolizije s ostalim vozilima u prometu. Rješenje se zasniva na tome da vozač motornog vozila u prometu što bolje uoči biciklista koji se nalazi ispred ili kraj njega pomoću svjetlosne signalizacije jakne. U sklopu diplomskog rada projektirat će se kolekcija e-jakni za bicikliste na koje će biti ugrađene LE diode (engl. Light Emitting Diode). Svrha ugrađenih LE dioda je povećanje vidljivosti biciklista u prometu u uvjetima smanjene vidljivosti. LE diode će također služiti i kao indikator smjera skretanja biciklista u lijevu ili desnu stranu, kako bi ostali sudionici u prometu bili na vrijeme informirani kuda biciklista skreće. Izradit će se jedan prototip e-jakne kako bi se dokazala njezina funkcionalnost.
Abstract (english)
According to current traffic rules in most countries, the bicycle is considered to be traffic-free means, and therefore the bicycle is an equal participant in traffic. Considering the large number of users of this means of transportation, it is necessary to think about the safety of cyclists and how we can increase traffic safety. This paper describes one of the possible solutions to increase safety when cyclists want to turn in a certain direction where collapse may occur with other vehicles in traffic. The solution is based on the fact that the driver of another vehicle in traffic can easily spot cyclists, beacuse the cyclists is wearing light signaling jacket. As part of the graduate thesis, a collection of e-jackets for cyclists will be built, with LE diodes (Light Emitting Diode) installed. The purpose of the built-in LE diodes is to increase the visibility of cyclists in traffic under reduced visibility conditions. LE diodes will also serve as an indicator of turning when the cyclist wants to turn left or right, so that other traffic participants are informed in advance of how the cyclist turns. An e-jacket prototype will be produced to demonstrate it's functionality.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:201:916537
Study programmeTitle: Textile Technology and Engineering; specializations in: Clothing Engineering, Textile Design and Management, Industrial Textile Design, Industrial Clothing Design, Textile Chemistry, Materials and Ecology
Course: Industrial Clothing Design
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka tekstilne tehnologije i inženjerstva (magistar/magistra inženjer/inženjerka tekstilne tehnologije i inženjerstva)
Type of resourceText
File originBorn digital
Access conditionsClosed access
Terms of useLicence In copyright icon
Created on2019-06-10 11:20:48