prikaz prve stranice dokumenta Tehnologija izrade vlačne opruge
  Download
PDF 5.37 MB
undergraduate thesis
Tehnologija izrade vlačne opruge
Koprivnica: University North, 2017. urn:nbn:hr:122:343580
Tremac, Đuro
University North
University centre Varaždin
Department of Mechanical Engineering

Institutional repository: University North Digital Repository

Cite this document

Tremac, Đ. (2017). Tehnologija izrade vlačne opruge (Undergraduate thesis). Koprivnica: University North. Retrieved from https://urn.nsk.hr/urn:nbn:hr:122:343580

Tremac, Đuro. "Tehnologija izrade vlačne opruge." Undergraduate thesis, University North, 2017. https://urn.nsk.hr/urn:nbn:hr:122:343580

Tremac, Đuro. "Tehnologija izrade vlačne opruge." Undergraduate thesis, University North, 2017. https://urn.nsk.hr/urn:nbn:hr:122:343580

Tremac, Đ. (2017). 'Tehnologija izrade vlačne opruge', Undergraduate thesis, University North, accessed 19 December 2024, https://urn.nsk.hr/urn:nbn:hr:122:343580

Tremac Đ. Tehnologija izrade vlačne opruge [Undergraduate thesis]. Koprivnica: University North; 2017 [cited 2024 December 19] Available at: https://urn.nsk.hr/urn:nbn:hr:122:343580

Đ. Tremac, "Tehnologija izrade vlačne opruge", Undergraduate thesis, University North, Koprivnica, 2017. Available at: https://urn.nsk.hr/urn:nbn:hr:122:343580

Metadata
TitleTehnologija izrade vlačne opruge
Title (english)Technology of making torsion spring
AuthorĐuro Tremac
MentorZlatko Botak (mentor)
Committee memberKatarina Pisačić (predsjednik povjerenstva)
Committee memberZlatko Botak (član povjerenstva)
Committee memberMarko Horvat (član povjerenstva)
GranterUniversity North
(University centre Varaždin)
(Department of Mechanical Engineering)
Koprivnica
Defense date and country2017-09-28, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Production Mechanical Engineering
Abstract
U radu je opisana tehnologija izrade vlačne opruge u tvornici opruga i metalnih proizvoda „ ESCO – Fofonjka d.o.o “ iz Bjelovara. Prikazani su postupci odabira procesa, strojeva, alata, proračuna opruge, dimenzioniranje opruge i odabira materijala. Za primjer je korištena vlačna opruga, koja je vrlo jednostavne izvedbe, ali ima široku primjenu. Potrebno je utvrditi optimalne parametre za njezinu proizvodnju, kako bi proizvodnja bila što jeftinija i efikansija, te kako bi se ispoštivali zadani rokovi.
Abstract (english)
This paper describes the technology of tension spring production in the spring and metal products factory "ESCO - Fofonjka d.o.o" from Bjelovar. Procedures for selecting processes, machines, tools, spring calculations, spring dimensioning, and material selection are shown. For example, a tension spring was used, which is very simple to perform, but has a wide application. It is necessary to determine optimal parameters for its production, to make production as cheaper and more efficient, and to meet the deadlines set.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:122:343580
Study programmeTitle: Mechanical Engineering, with emphasis in Production Engineering
Study programme type: professional
Study level: undergraduate
Academic / professional title: stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2017-10-20 11:20:43