prikaz prve stranice dokumenta Preoblikovanje polimera na uređaju za vakuumsko toplo oblikovanje
  Download
PDF 2.53 MB
undergraduate thesis
Preoblikovanje polimera na uređaju za vakuumsko toplo oblikovanje
Koprivnica: University North, 2018. urn:nbn:hr:122:377191
Kliček, Vladimir
University North
University centre Varaždin
Department of Mechanical Engineering

Institutional repository: University North Digital Repository

Cite this document

Kliček, V. (2018). Preoblikovanje polimera na uređaju za vakuumsko toplo oblikovanje (Undergraduate thesis). Koprivnica: University North. Retrieved from https://urn.nsk.hr/urn:nbn:hr:122:377191

Kliček, Vladimir. "Preoblikovanje polimera na uređaju za vakuumsko toplo oblikovanje." Undergraduate thesis, University North, 2018. https://urn.nsk.hr/urn:nbn:hr:122:377191

Kliček, Vladimir. "Preoblikovanje polimera na uređaju za vakuumsko toplo oblikovanje." Undergraduate thesis, University North, 2018. https://urn.nsk.hr/urn:nbn:hr:122:377191

Kliček, V. (2018). 'Preoblikovanje polimera na uređaju za vakuumsko toplo oblikovanje', Undergraduate thesis, University North, accessed 30 April 2024, https://urn.nsk.hr/urn:nbn:hr:122:377191

Kliček V. Preoblikovanje polimera na uređaju za vakuumsko toplo oblikovanje [Undergraduate thesis]. Koprivnica: University North; 2018 [cited 2024 April 30] Available at: https://urn.nsk.hr/urn:nbn:hr:122:377191

V. Kliček, "Preoblikovanje polimera na uređaju za vakuumsko toplo oblikovanje", Undergraduate thesis, University North, Koprivnica, 2018. Available at: https://urn.nsk.hr/urn:nbn:hr:122:377191

Metadata
TitlePreoblikovanje polimera na uređaju za vakuumsko toplo oblikovanje
Title (english)Polymer shaping on vacuum-hot forming device
AuthorVladimir Kliček
MentorSanja Šolić (mentor)
Committee memberZlatko Botak (predsjednik povjerenstva)
Committee memberSanja Šolić (član povjerenstva)
Committee memberMarko Horvat (član povjerenstva)
GranterUniversity North
(University centre Varaždin)
(Department of Mechanical Engineering)
Koprivnica
Defense date and country2018-11-28, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Production Mechanical Engineering
Abstract
U ovom završnom radu bilo je potrebno prikazati postupke tehnologije prerade polimernih materijala te dati kratak pregled polimera, njihovog dobivanja i podjelu. U sklopu završnog rada izrađen je uređaj za vakuumsko toplinsko oblikovanje plastomera te je u teorijskom dijelu rada naglasak stavljen na svojstva i vrste plastomera. U eksperimentalnom dijelu rada provedeno je ispitivanje parametara vakuumskog toplog oblikovanja na prionjivosti polipropilenske folije dvije različite debljine, na ispitni model. Rezultati su pokazali da parametri postupka vakuumskog toplinskog oblikovanja imaju velik utjecaj na prionjivost polipropilenskih folija te da je u konkretnoj industrijskoj primjeni postupka potrebno provesti optimiranje parametara postupaka u ovisnosti o debljini materijala koji se oblikuju kako bi se dobili najbolji rezultati.
Abstract (english)
In this thesis paper, it was necessary to show the procedures of polymer processing technology and to give a brief overview of polymers in general, how trey are produced and their classification. As part of this thesis paper, a device for vacuum-hot forming of plastomers was developed. In the theoretical part of the paper, emphasis was put on the properties and types of polymers. In the experimental part of the paper, an examination was conducted to determine the parameters of vacuum hot forming on the adhesion of polypropylene foil of two different thicknesses to the test model. The results have shown that the parameters of the vacuum-hot forming process have a great influence on the adhesion of the polypropylene foils and that in industrial applications of the process it is necessary to optimize the parameters of the processes depending on the thickness of the materials to be formed in order to obtain the best results.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:122:377191
Study programmeTitle: Mechanical Engineering, with emphasis in Production Engineering
Study programme type: professional
Study level: undergraduate
Academic / professional title: stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2019-01-07 12:38:14