prikaz prve stranice dokumenta 3D oblikovanje kalupa za niskotlačno lijevanje hot-melt tehnologijom
  Download
PDF 5.02 MB
undergraduate thesis
3D oblikovanje kalupa za niskotlačno lijevanje hot-melt tehnologijom
Koprivnica: University North, 2021. urn:nbn:hr:122:460780
Filipović, Marijan
University North
University centre Varaždin
Department of Mechanical Engineering

Institutional repository: University North Digital Repository

Cite this document

Filipović, M. (2021). 3D oblikovanje kalupa za niskotlačno lijevanje hot-melt tehnologijom (Undergraduate thesis). Koprivnica: University North. Retrieved from https://urn.nsk.hr/urn:nbn:hr:122:460780

Filipović, Marijan. "3D oblikovanje kalupa za niskotlačno lijevanje hot-melt tehnologijom." Undergraduate thesis, University North, 2021. https://urn.nsk.hr/urn:nbn:hr:122:460780

Filipović, Marijan. "3D oblikovanje kalupa za niskotlačno lijevanje hot-melt tehnologijom." Undergraduate thesis, University North, 2021. https://urn.nsk.hr/urn:nbn:hr:122:460780

Filipović, M. (2021). '3D oblikovanje kalupa za niskotlačno lijevanje hot-melt tehnologijom', Undergraduate thesis, University North, accessed 25 December 2024, https://urn.nsk.hr/urn:nbn:hr:122:460780

Filipović M. 3D oblikovanje kalupa za niskotlačno lijevanje hot-melt tehnologijom [Undergraduate thesis]. Koprivnica: University North; 2021 [cited 2024 December 25] Available at: https://urn.nsk.hr/urn:nbn:hr:122:460780

M. Filipović, "3D oblikovanje kalupa za niskotlačno lijevanje hot-melt tehnologijom", Undergraduate thesis, University North, Koprivnica, 2021. Available at: https://urn.nsk.hr/urn:nbn:hr:122:460780

Metadata
Title3D oblikovanje kalupa za niskotlačno lijevanje hot-melt tehnologijom
Title (english)3D design for low pressure hot melt casting
AuthorMarijan Filipović
MentorSiniša Švoger (mentor)
Committee memberAnte Čikić (predsjednik povjerenstva)
Committee memberSiniša Švoger (član povjerenstva)
Committee memberBožidar Hršak (član povjerenstva)
GranterUniversity North
(University centre Varaždin)
(Department of Mechanical Engineering)
Koprivnica
Defense date and country2021-07-05, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Production Mechanical Engineering
Abstract
ovom radu opisan je postupak izrade kalupa za niskotlačno lijevanje, hot-melt tehnologijom, primjenom alata za izradu kalupa (Mold tools), u programu SolidWorks. Opisana je tehnologija izrade pojedinih dijelova kalupa na CNC obradnom stroju glodalici, te korišteni modul za programiranje CNC stroja. Analizirane su dostupne teoretske i praktične spoznaje o niskotlačnom lijevanju hot-melt tehnologijom, te je izvršeni sam postupak lijevanja u priređeni kalup. Također su navedene koje greške su se javile nakon prvog lijevanja, mogućnost poboljšanja lijevanja i sprječavanja nastanka istih grešaka.
Abstract (english)
This thesis describes process of making a mold for low pressure casting of Hot-Melt tehnologies, using mold making tools in software called SolidWorks. It also describes technology of making individual part of the mold on a CNC machinde, and the module used for programing CNC machining. The available theoretical and practical knowledge about low-pressure hot-melt casting technology was analyzed, and the casting procedure itself was performed in prepared molds. Also listed are the errors that occurred after first casting and the possibility of improving the casting and preventing the occurrence of the same errors.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:122:460780
Study programmeTitle: Mechanical Engineering, with emphasis in Production Engineering
Study programme type: professional
Study level: undergraduate
Academic / professional title: stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2021-07-21 11:51:04