prikaz prve stranice dokumenta Utjecaj brzine laserskog rezanja na kvalitetu reza
  Download
PDF 3.35 MB
master's thesis
Utjecaj brzine laserskog rezanja na kvalitetu reza
Koprivnica: University North, 2021. urn:nbn:hr:122:909771
Zorman, Tin
University North
University centre Varaždin
Department of Mechanical Engineering

Institutional repository: University North Digital Repository

Cite this document

Zorman, T. (2021). Utjecaj brzine laserskog rezanja na kvalitetu reza (Master's thesis). Koprivnica: University North. Retrieved from https://urn.nsk.hr/urn:nbn:hr:122:909771

Zorman, Tin. "Utjecaj brzine laserskog rezanja na kvalitetu reza." Master's thesis, University North, 2021. https://urn.nsk.hr/urn:nbn:hr:122:909771

Zorman, Tin. "Utjecaj brzine laserskog rezanja na kvalitetu reza." Master's thesis, University North, 2021. https://urn.nsk.hr/urn:nbn:hr:122:909771

Zorman, T. (2021). 'Utjecaj brzine laserskog rezanja na kvalitetu reza', Master's thesis, University North, accessed 18 April 2024, https://urn.nsk.hr/urn:nbn:hr:122:909771

Zorman T. Utjecaj brzine laserskog rezanja na kvalitetu reza [Master's thesis]. Koprivnica: University North; 2021 [cited 2024 April 18] Available at: https://urn.nsk.hr/urn:nbn:hr:122:909771

T. Zorman, "Utjecaj brzine laserskog rezanja na kvalitetu reza", Master's thesis, University North, Koprivnica, 2021. Available at: https://urn.nsk.hr/urn:nbn:hr:122:909771

Metadata
TitleUtjecaj brzine laserskog rezanja na kvalitetu reza
Title (english)Influence of laser cutting speed on cut quality
AuthorTin Zorman
MentorMatija Bušić (mentor)
Committee memberMatija Bušić (predsjednik povjerenstva)
Committee memberTomislav Veliki (član povjerenstva)
Committee memberSven Maričić (član povjerenstva)
GranterUniversity North
(University centre Varaždin)
(Department of Mechanical Engineering)
Koprivnica
Defense date and country2021-07-16, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Production Mechanical Engineering
Abstract
Cilj ovog rada bio je ispitati utjecaj brzine laserskog rezanja na kvalitetu samog reza. Rezani su ispitni uzorci debljine 5 mm od nekoliko vrsta metala (opći konstrukcijski čelik, nehrđajući čelik, aluminijeva legura) na fiber laseru njemačkog proizvođača Trumpf. Ispitivanja odnosno mjerenja samih uzoraka provedena su na Sveučilištu Sjever u Varaždinu. Teorijski dio rada fokusiran je na lasersko rezanje kao tehnologiju toplinskog rezanja iz skupine suvremenih proizvodnih tehnologija. Opisuje sam stroj i princip rada istog, tehnologiju laserskog rezanja, ali i daje jedan generalni uvid u suvremene proizvodne tehnologije.
Abstract (english)
The aim of this paper is to examine the influence of cutting speed on the quality of the cut itself using a fiber laser. Test samples 5 mm thick will be cut from several types of metal (construction steel, stainless steel, aluminum) on a fiber laser from the German manufacturer Trumpf. Tests and measurements of the samples themselves were conducted at the University North in Varaždin. The theoretical part of the paper is focused on laser cutting as a processing technology by separating particles from the groups of modern production technologies. It describes the machine and the principle of operation of the same, laser cutting technology, but also gives a general insight into modern production technologies.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:122:909771
Study programmeTitle: Mechanical engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2021-10-01 13:16:29