prikaz prve stranice dokumenta Utjecaj alata na oblik zavarenog spoja pri točkastom zavarivanju trenjem rotirajućim alatom
  Download
PDF 4.27 MB
master's thesis
Utjecaj alata na oblik zavarenog spoja pri točkastom zavarivanju trenjem rotirajućim alatom
Koprivnica: University North, 2022. urn:nbn:hr:122:106199
Kocijan, Filip
University North
University centre Varaždin
Department of Mechanical Engineering

Institutional repository: University North Digital Repository

Cite this document

Kocijan, F. (2022). Utjecaj alata na oblik zavarenog spoja pri točkastom zavarivanju trenjem rotirajućim alatom (Master's thesis). Koprivnica: University North. Retrieved from https://urn.nsk.hr/urn:nbn:hr:122:106199

Kocijan, Filip. "Utjecaj alata na oblik zavarenog spoja pri točkastom zavarivanju trenjem rotirajućim alatom." Master's thesis, University North, 2022. https://urn.nsk.hr/urn:nbn:hr:122:106199

Kocijan, Filip. "Utjecaj alata na oblik zavarenog spoja pri točkastom zavarivanju trenjem rotirajućim alatom." Master's thesis, University North, 2022. https://urn.nsk.hr/urn:nbn:hr:122:106199

Kocijan, F. (2022). 'Utjecaj alata na oblik zavarenog spoja pri točkastom zavarivanju trenjem rotirajućim alatom', Master's thesis, University North, accessed 28 April 2024, https://urn.nsk.hr/urn:nbn:hr:122:106199

Kocijan F. Utjecaj alata na oblik zavarenog spoja pri točkastom zavarivanju trenjem rotirajućim alatom [Master's thesis]. Koprivnica: University North; 2022 [cited 2024 April 28] Available at: https://urn.nsk.hr/urn:nbn:hr:122:106199

F. Kocijan, "Utjecaj alata na oblik zavarenog spoja pri točkastom zavarivanju trenjem rotirajućim alatom", Master's thesis, University North, Koprivnica, 2022. Available at: https://urn.nsk.hr/urn:nbn:hr:122:106199

Metadata
TitleUtjecaj alata na oblik zavarenog spoja pri točkastom zavarivanju trenjem rotirajućim alatom
Title (english)Influence of the tool on weld profile in friction stir spot welding
AuthorFilip Kocijan
MentorMatija Bušić (mentor)
Committee memberSanja Šolić (predsjednik povjerenstva)
Committee memberMatija Bušić (član povjerenstva)
Committee memberJasna Leder Horina (član povjerenstva)
GranterUniversity North
(University centre Varaždin)
(Department of Mechanical Engineering)
Koprivnica
Defense date and country2022-09-08, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovom radu su proučavani postupci zavarivanja trenjem. Proučavano je zavarivanje trenjem rotirajućim alatom (Friction Stir Welding), a posebno detaljno je proučavano točkasto zavarivanje trenjem rotirajućim alatom (Friction Stir Spot Welding). Govori se o svim parametrima, vrstama alata i njihovom učinku, te oblicima spojeva koji se mogu postići ovim postupkom. U eksperimentalnom dijelu rada je izvedeno točkasto zavarivanje trenjem rotirajućim alatom limova aluminijeve legure uz različite parametre zavarivanja različitim oblicima alata. Praćeno je ponašanje materijala u postupku zavarivanja, te je izvršena analiza poprečnog presjeka zavarenog spoja na stereomikroskopu. Izmjerene su dimenzije zavarenih spojeva, te je temeljem analize utvrđena ovisnost dimenzija o parametrima zavarivanja. Na kraju je donesen zaključak o utjecaju parametara primijenjenih u eksperimentu na oblik zavarenog spoja.
Abstract (english)
In this work Friction welding procedures are studied. Friction Stir Welding is studied and especially Friction Stir Spot Welding is studied in detail. All parameters, types of tools and their effect, and forms of joints that can be achieved with this procedure are discussed. In the experimental part of the work, friction stir spot welding of aluminum alloy sheets is performed with different welding parameters and different tool shapes. The behavior of the material during the welding process is monitored, and the cross-section of the welded joint is analyzed using a light microscope. The dimensions of the welded joints are measured and the dependence of the dimensions on the welding parameters are determined based on the analysis. At the end, a conclusion is made about the influence of the parameters applied in the experiment on the shape of the welded joint.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:122:106199
Study programmeTitle: Mechanical engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2022-11-29 11:25:11