prikaz prve stranice dokumenta Primjena zavarivanja trenjem rotirajućim alatom na aluminijskim sendvič panelima
  Download
PDF 2.06 MB
master's thesis
Primjena zavarivanja trenjem rotirajućim alatom na aluminijskim sendvič panelima
Koprivnica: University North, 2022. urn:nbn:hr:122:558944
Marciuš, Vanja
University North
University centre Varaždin
Department of Mechanical Engineering

Institutional repository: University North Digital Repository

Cite this document

Marciuš, V. (2022). Primjena zavarivanja trenjem rotirajućim alatom na aluminijskim sendvič panelima (Master's thesis). Koprivnica: University North. Retrieved from https://urn.nsk.hr/urn:nbn:hr:122:558944

Marciuš, Vanja. "Primjena zavarivanja trenjem rotirajućim alatom na aluminijskim sendvič panelima." Master's thesis, University North, 2022. https://urn.nsk.hr/urn:nbn:hr:122:558944

Marciuš, Vanja. "Primjena zavarivanja trenjem rotirajućim alatom na aluminijskim sendvič panelima." Master's thesis, University North, 2022. https://urn.nsk.hr/urn:nbn:hr:122:558944

Marciuš, V. (2022). 'Primjena zavarivanja trenjem rotirajućim alatom na aluminijskim sendvič panelima', Master's thesis, University North, accessed 29 April 2024, https://urn.nsk.hr/urn:nbn:hr:122:558944

Marciuš V. Primjena zavarivanja trenjem rotirajućim alatom na aluminijskim sendvič panelima [Master's thesis]. Koprivnica: University North; 2022 [cited 2024 April 29] Available at: https://urn.nsk.hr/urn:nbn:hr:122:558944

V. Marciuš, "Primjena zavarivanja trenjem rotirajućim alatom na aluminijskim sendvič panelima", Master's thesis, University North, Koprivnica, 2022. Available at: https://urn.nsk.hr/urn:nbn:hr:122:558944

Metadata
TitlePrimjena zavarivanja trenjem rotirajućim alatom na aluminijskim sendvič panelima
Title (english)Application of friction stir welding on aluminum foam sandwich panels
AuthorVanja Marciuš
MentorMatija Bušić (mentor)
Committee memberZlatko Botak (predsjednik povjerenstva)
Committee memberMatija Bušić (član povjerenstva)
Committee memberŽivko Kondić (član povjerenstva)
GranterUniversity North
(University centre Varaždin)
(Department of Mechanical Engineering)
Koprivnica
Defense date and country2022-09-14, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovom diplomskom radu obrađena je tema „Primjena zavarivanja trenjem rotirajućim alatom na aluminijskim sendvič panelima“. Rad se sastoji od dva dijela, teorijskog i eksperimentalnog. Pošto će se zavarivati aluminijeva legura, u teorijskom je dijelu prikazana podjela istih te njihovo označavanje, primjena i problematika zavarivanja. Potom je opisan potreban postupak zavarivanja tj. zavarivanje trenjem rotirajućim alatom (FSW) kao i prednosti i nedostaci istog te utjecajni faktori, zavarljivost, vrste spojeva, pogreške i primjena FSW postupka. U eksperimentalnom su dijelu zavareni trenjem rotirajućim alatom aluminijski sendvič paneli. Nakon FSW postupka uzorci su izrezani na pili te izbrušeni i nagrizani u klorovodičnoj kiselini. Na kraju je provedena mikroskopska analiza uzoraka. Naposljetku, temeljem dobivenog, donesen je zaključak.
Abstract (english)
The topic "Application of friction stir welding on aluminium foam sandwich panels" is discussed in this graduate thesis. The paper consists of two parts, theoretical and experimental. Since the aluminium alloy will be welded, the theoretical part describes the division of aluminium alloys and their marking, application and problems of welding. Then, it is described the required welding process, friction stir welding (FSW), as well as its advantages and disadvantages, influencing factors, weldability, types of joints, errors and application of the FSW process. In the experimental part, aluminium sandwich panels were welded by FSW process. After the FSW process, the samples were cut on a saw and ground and etched in hydrochloric acid. At the end, a microscopic analysis of the samples was performed. Finally, based on what was obtained, a conclusion was reached.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:122:558944
Study programmeTitle: Mechanical engineering
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2022-11-29 14:53:26