prikaz prve stranice dokumenta Određivanje parametara obrade i izrada CNC koda za obradu utora glodanjem aluminijeve legure EN AW 6082
  Download
PDF 3.4 MB
undergraduate thesis
Određivanje parametara obrade i izrada CNC koda za obradu utora glodanjem aluminijeve legure EN AW 6082
Koprivnica: University North, 2024. urn:nbn:hr:122:715704
Levanić, Adrian
University North
University centre Varaždin
Department of Mechanical Engineering

Institutional repository: University North Digital Repository

Cite this document

Levanić, A. (2024). Određivanje parametara obrade i izrada CNC koda za obradu utora glodanjem aluminijeve legure EN AW 6082 (Undergraduate thesis). Koprivnica: University North. Retrieved from https://urn.nsk.hr/urn:nbn:hr:122:715704

Levanić, Adrian. "Određivanje parametara obrade i izrada CNC koda za obradu utora glodanjem aluminijeve legure EN AW 6082." Undergraduate thesis, University North, 2024. https://urn.nsk.hr/urn:nbn:hr:122:715704

Levanić, Adrian. "Određivanje parametara obrade i izrada CNC koda za obradu utora glodanjem aluminijeve legure EN AW 6082." Undergraduate thesis, University North, 2024. https://urn.nsk.hr/urn:nbn:hr:122:715704

Levanić, A. (2024). 'Određivanje parametara obrade i izrada CNC koda za obradu utora glodanjem aluminijeve legure EN AW 6082', Undergraduate thesis, University North, accessed 18 December 2024, https://urn.nsk.hr/urn:nbn:hr:122:715704

Levanić A. Određivanje parametara obrade i izrada CNC koda za obradu utora glodanjem aluminijeve legure EN AW 6082 [Undergraduate thesis]. Koprivnica: University North; 2024 [cited 2024 December 18] Available at: https://urn.nsk.hr/urn:nbn:hr:122:715704

A. Levanić, "Određivanje parametara obrade i izrada CNC koda za obradu utora glodanjem aluminijeve legure EN AW 6082", Undergraduate thesis, University North, Koprivnica, 2024. Available at: https://urn.nsk.hr/urn:nbn:hr:122:715704

Metadata
TitleOdređivanje parametara obrade i izrada CNC koda za obradu utora glodanjem aluminijeve legure EN AW 6082
Title (english)Determination of processing parameters and creation of CNC code for slot milling of EN AW 6082 aluminium alloy
AuthorAdrian Levanić
MentorMatija Bušić (mentor)
Committee memberTomislav Veliki (predsjednik povjerenstva)
Committee memberMatija Bušić (član povjerenstva)
Committee memberMarko Horvat (član povjerenstva)
GranterUniversity North
(University centre Varaždin)
(Department of Mechanical Engineering)
Koprivnica
Defense date and country2024-09-24, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Ovaj rad istražuje važnost CNC upravljanja glodalicama i mogućnosti suvremenih CNC glodalica. Prvi dio rada opisuje način rada glodaćih alatnih strojeva, alate, karakteristike ove vrste obrade odvajanjem čestica te sam proces glodanja. Navedene su značajke CNC upravljanja, mogućnosti pojedinih CNC glodalica i uspoređeni su parametri obrade. Nakon toga slijedi poglavlje o Haas Desktop Mill glodalici gdje je detaljno objašnjeno programsko sučelje navedene glodalice. Drugi dio rada opisuje eksperimentalni postupak kreiranja programa za glodanje utora aluminijeve legure na temelju tehničkog crteža. Objašnjeni su različiti aspekti izrade utora, postupak određivanja nul-točke, VPS predložak glodanja, ručno izrađen kod te cijeli proces strojne obrade. Slijedi analiza provedene obrade, a na kraju je donesen konačni zaključak ovog rada.
Abstract (english)
This thesis explores the importance of CNC control for milling machines and the capabilities of modern CNC mills. The first part of the thesis describes the operation of milling machines, the tools, the characteristics of this type of machining involving material removal and the milling process. It outlines the features of CNC control, the capabilities of different CNC mills and compares processing parameters. This is followed by a chapter on the Haas Desktop Mill, where the programming interface of the specified mill is explained in detail. The second part of the thesis describes the experimental procedure of creating a program for slot milling of aluminum alloy based on a technical drawing. It explains various aspects of pocket milling, the process of determining the zero point, the VPS milling template, manually created code and the entire machining process. An analysis of the conducted machining follows, and finally, the thesis offers the main conclusion.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:122:715704
Study programmeTitle: Mechanical Engineering, with emphasis in Production Engineering
Study programme type: professional
Study level: undergraduate
Academic / professional title: prvostupnik/prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (prvostupnik/prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2024-10-10 16:21:55