prikaz prve stranice dokumenta Utjecaj parametara obrade na točnost dimenzija pri glodanju polimera PA 6
  Download
PDF 22.75 MB
undergraduate thesis
Utjecaj parametara obrade na točnost dimenzija pri glodanju polimera PA 6
Koprivnica: University North, 2024. urn:nbn:hr:122:375930
Sakač, Marija
University North
University centre Varaždin
Department of Mechanical Engineering

Institutional repository: University North Digital Repository

Cite this document

Sakač, M. (2024). Utjecaj parametara obrade na točnost dimenzija pri glodanju polimera PA 6 (Undergraduate thesis). Koprivnica: University North. Retrieved from https://urn.nsk.hr/urn:nbn:hr:122:375930

Sakač, Marija. "Utjecaj parametara obrade na točnost dimenzija pri glodanju polimera PA 6." Undergraduate thesis, University North, 2024. https://urn.nsk.hr/urn:nbn:hr:122:375930

Sakač, Marija. "Utjecaj parametara obrade na točnost dimenzija pri glodanju polimera PA 6." Undergraduate thesis, University North, 2024. https://urn.nsk.hr/urn:nbn:hr:122:375930

Sakač, M. (2024). 'Utjecaj parametara obrade na točnost dimenzija pri glodanju polimera PA 6', Undergraduate thesis, University North, accessed 19 December 2024, https://urn.nsk.hr/urn:nbn:hr:122:375930

Sakač M. Utjecaj parametara obrade na točnost dimenzija pri glodanju polimera PA 6 [Undergraduate thesis]. Koprivnica: University North; 2024 [cited 2024 December 19] Available at: https://urn.nsk.hr/urn:nbn:hr:122:375930

M. Sakač, "Utjecaj parametara obrade na točnost dimenzija pri glodanju polimera PA 6", Undergraduate thesis, University North, Koprivnica, 2024. Available at: https://urn.nsk.hr/urn:nbn:hr:122:375930

Metadata
TitleUtjecaj parametara obrade na točnost dimenzija pri glodanju polimera PA 6
Title (english)Influence of processing parameters on dimensional accuracy in milling of PA 6 polymer
AuthorMarija Sakač
MentorMatija Bušić (mentor)
Committee memberTomislav Veliki (predsjednik povjerenstva)
Committee memberMatija Bušić (član povjerenstva)
Committee memberMarko Horvat (član povjerenstva)
GranterUniversity North
(University centre Varaždin)
(Department of Mechanical Engineering)
Koprivnica
Defense date and country2024-10-04, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Ovaj rad govori o postupku odvajanja čestica koji se naziva glodanje, silama koje se javljaju i utjecajnim parametrima za glodanje. Govori se o alatima za glodanje, o podjeli glodalica te pobliže opisuje svaku od glodalica. Spominju se i načini automatizacije izmjene obradaka na radnom stolu glodalice. Rad opisuje način rada enkodera, uređaja koji su glavni element mjernih sustava NC strojeva te navodi najčešću podjelu mjernih sustava. Opisana je CNC glodalica Haas Desktop Mill i Haas upravljačka jedinica. Opisano je i programiranje pomoću VPS-a. Predstavljeni su polimeri i opisana su svojstva poliamida 6. U eksperimentalnom dijelu se pomoću VPS-a programira kod za obradu i obrađuju se četiri komada s različitom brzinom posmaka. Analizira se utjecaj posmaka na točnost izrade.
Abstract (english)
This paper discusses the particle separation process known as milling, the forces that occur, and the influential parameters for milling. It covers milling tools, the classification of milling machines, and provides a detailed description of each type of milling machine. The methods of automating the change of workpieces on the milling machine table are also mentioned. The paper describes the operation of encoders, which are the main element of measurement systems in CNC machines, and lists the most common classifications of measurement systems. The CNC milling machine Haas Desktop Mill and the Haas control unit are described. Programming using VPS is also explained. Polymers are presented, with a focus on the properties of polyamide 6. In the experimental part, code for machining is programmed using VPS, and four pieces are machined at different feed rates. The impact of feed rate on manufacturing accuracy is analyzed.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:122:375930
Study programmeTitle: Mechanical Engineering, with emphasis in Production Engineering
Study programme type: professional
Study level: undergraduate
Academic / professional title: prvostupnik/prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (prvostupnik/prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2024-10-23 10:51:07