prikaz prve stranice dokumenta Unos i provođenje topline pri TIG zavarivanju bakra i legura bakra
  Download
PDF 3.87 MB
master's thesis
Unos i provođenje topline pri TIG zavarivanju bakra i legura bakra
Koprivnica: University North, 2024. urn:nbn:hr:122:557971
Zelić, Mihael
University North
University centre Varaždin
Department of Mechanical Engineering

Institutional repository: University North Digital Repository

Cite this document

Zelić, M. (2024). Unos i provođenje topline pri TIG zavarivanju bakra i legura bakra (Master's thesis). Koprivnica: University North. Retrieved from https://urn.nsk.hr/urn:nbn:hr:122:557971

Zelić, Mihael. "Unos i provođenje topline pri TIG zavarivanju bakra i legura bakra." Master's thesis, University North, 2024. https://urn.nsk.hr/urn:nbn:hr:122:557971

Zelić, Mihael. "Unos i provođenje topline pri TIG zavarivanju bakra i legura bakra." Master's thesis, University North, 2024. https://urn.nsk.hr/urn:nbn:hr:122:557971

Zelić, M. (2024). 'Unos i provođenje topline pri TIG zavarivanju bakra i legura bakra', Master's thesis, University North, accessed 24 December 2024, https://urn.nsk.hr/urn:nbn:hr:122:557971

Zelić M. Unos i provođenje topline pri TIG zavarivanju bakra i legura bakra [Master's thesis]. Koprivnica: University North; 2024 [cited 2024 December 24] Available at: https://urn.nsk.hr/urn:nbn:hr:122:557971

M. Zelić, "Unos i provođenje topline pri TIG zavarivanju bakra i legura bakra", Master's thesis, University North, Koprivnica, 2024. Available at: https://urn.nsk.hr/urn:nbn:hr:122:557971

Metadata
TitleUnos i provođenje topline pri TIG zavarivanju bakra i legura bakra
Title (english)Heat input and conductivity in TIG welding of copper and copper alloys
AuthorMihael Zelić
MentorMatija Bušić (mentor)
Committee memberTomislav Veliki (predsjednik povjerenstva)
Committee memberMatija Bušić (član povjerenstva)
Committee memberZlatko Botak (član povjerenstva)
GranterUniversity North
(University centre Varaždin)
(Department of Mechanical Engineering)
Koprivnica
Defense date and country2024-10-17, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Rad se bavi analizom unosa i provođenja topline pri TIG zavarivanju bakra i njegovih legura. Zbog visoke toplinske vodljivosti bakra, održavanje optimalne temperature zavarivanja predstavlja izazov. Cilj istraživanja bio je ispitati distribuciju temperature tijekom procesa protaljivanja, a ne zavarivanja, kako bi se minimizirao utjecaj faznih promjena u materijalu. Provedeni su eksperimentalni i numerički pristupi, uključujući ANSYS simulacije, radi boljeg razumijevanja toplinskih procesa. Eksperimenti su omogućili mjerenje distribucije temperature na simetričnim točkama ploča pomoću termoparova, dok se pokretni izvor topline kretao preko bakrenih ploča. Analizirani su parametri kao što su brzina izvora, vrsta zaštitnog plina i početna temperatura materijala. Rad također obuhvaća preporuke za optimizaciju parametara zavarivanja radi postizanja kvalitetnijih spojeva te smanjenja deformacija zavarenih materijala.
Abstract (english)
The paper focuses on the analysis of heat input and conduction during TIG welding of copper and its alloys. Due to the high thermal conductivity of copper, maintaining the optimal welding temperature presents a challenge. The goal of the research was to examine the temperature distribution during the process of gouging, rather than welding, to minimize the impact of phase changes in the material. Experimental and numerical approaches were conducted, including ANSYS simulations, to better understand the thermal processes. Experiments allowed for the measurement of temperature distribution at symmetrical points on the plates using thermocouples, while the moving heat source passed over copper plates. Parameters such as the speed of the source, type of shielding gas, and the initial temperature of the material were analyzed. The paper also includes recommendations for optimizing welding parameters to achieve better-quality joints and reduce deformation of welded materials.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:122:557971
Study programmeTitle: Mechanical engineering
Study programme type: university
Study level: graduate
Academic / professional title: sveučilišni magistar/magistra inženjer/inženjerka strojarstva (sveučilišni magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2024-10-25 11:11:27