prikaz prve stranice dokumenta DOZATOR KAO DIO SKLOPA PRINTELEX
  Download
PDF 1.97 MB
undergraduate thesis
DOZATOR KAO DIO SKLOPA PRINTELEX
Pula: University of Pula, 2021. urn:nbn:hr:137:728662
Vivoda, Juraj
University of Pula
Juraj Dobrila University of Pula, Department of Engineering

Institutional repository: Digital Repository Juraj Dobrila University of Pula

Cite this document

Vivoda, J. (2021). DOZATOR KAO DIO SKLOPA PRINTELEX (Undergraduate thesis). Pula: University of Pula. Retrieved from https://urn.nsk.hr/urn:nbn:hr:137:728662

Vivoda, Juraj. "DOZATOR KAO DIO SKLOPA PRINTELEX." Undergraduate thesis, University of Pula, 2021. https://urn.nsk.hr/urn:nbn:hr:137:728662

Vivoda, Juraj. "DOZATOR KAO DIO SKLOPA PRINTELEX." Undergraduate thesis, University of Pula, 2021. https://urn.nsk.hr/urn:nbn:hr:137:728662

Vivoda, J. (2021). 'DOZATOR KAO DIO SKLOPA PRINTELEX', Undergraduate thesis, University of Pula, accessed 03 June 2023, https://urn.nsk.hr/urn:nbn:hr:137:728662

Vivoda J. DOZATOR KAO DIO SKLOPA PRINTELEX [Undergraduate thesis]. Pula: University of Pula; 2021 [cited 2023 June 03] Available at: https://urn.nsk.hr/urn:nbn:hr:137:728662

J. Vivoda, "DOZATOR KAO DIO SKLOPA PRINTELEX", Undergraduate thesis, University of Pula, Pula, 2021. Available at: https://urn.nsk.hr/urn:nbn:hr:137:728662

Metadata
TitleDOZATOR KAO DIO SKLOPA PRINTELEX
AuthorJuraj Vivoda
MentorSven Maričić (mentor)
GranterUniversity of Pula
(Juraj Dobrila University of Pula, Department of Engineering)
Pula
Defense date and country2021, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Production Mechanical Engineering
Abstract
Cilj rada je prikazati projektiranje te konstruiranje dozatora koji je dio Printelex sklopa. Prilikom projektiranja dozatora služio sam se programskim alatom koji se zove Fusion 360 koji služi za CAD/CAM modeliranje. Prilikom projektiranja morao sam paziti na izbor materijala od kojega će model biti izrađen kako sastav praha unutar dozatora ne bi reagirao sa samim materijalom. Dozator služi doziranju djela praha u male kalupe pri proizvodnji suplemenata hrani.
Abstract (english)
This paper aims to present the design and construction of a dispenser that is part of the Printelex assembly. When designing the dispenser, I used a software tool called Fusion 360, which is used for CAD / CAM modeling. When designing it, I had to pay attention to the choice of material from which the model will be made so that the composition of the powder inside the dispenser would not react with the material itself. The dispenser serves to dose a portion of the powder into small molds in the production of food supplements.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:137:728662
Study programmeTitle: Production Engineering
Study programme type: professional
Study level: undergraduate
Academic / professional title: stručni/a prvostupnik/prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (stručni/a prvostupnik/prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2021-09-22 09:00:26