prikaz prve stranice dokumenta Utjecaj plastičnosti materijala
  Download
PDF 2.77 MB
undergraduate thesis
Utjecaj plastičnosti materijala
Pula: University of Pula, 2023. urn:nbn:hr:137:176941
Petrinčić, Antonio
University of Pula
Juraj Dobrila University of Pula, Department of Engineering

Institutional repository: Digital Repository Juraj Dobrila University of Pula

Cite this document

Petrinčić, A. (2023). Utjecaj plastičnosti materijala (Undergraduate thesis). Pula: University of Pula. Retrieved from https://urn.nsk.hr/urn:nbn:hr:137:176941

Petrinčić, Antonio. "Utjecaj plastičnosti materijala." Undergraduate thesis, University of Pula, 2023. https://urn.nsk.hr/urn:nbn:hr:137:176941

Petrinčić, Antonio. "Utjecaj plastičnosti materijala." Undergraduate thesis, University of Pula, 2023. https://urn.nsk.hr/urn:nbn:hr:137:176941

Petrinčić, A. (2023). 'Utjecaj plastičnosti materijala', Undergraduate thesis, University of Pula, accessed 10 May 2024, https://urn.nsk.hr/urn:nbn:hr:137:176941

Petrinčić A. Utjecaj plastičnosti materijala [Undergraduate thesis]. Pula: University of Pula; 2023 [cited 2024 May 10] Available at: https://urn.nsk.hr/urn:nbn:hr:137:176941

A. Petrinčić, "Utjecaj plastičnosti materijala", Undergraduate thesis, University of Pula, Pula, 2023. Available at: https://urn.nsk.hr/urn:nbn:hr:137:176941

Metadata
TitleUtjecaj plastičnosti materijala
Title (english)Influence of material plasticity
AuthorAntonio Petrinčić
MentorVedrana Špada (mentor)
GranterUniversity of Pula
(Juraj Dobrila University of Pula, Department of Engineering)
Pula
Defense date and country2023-09-26, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Production Mechanical Engineering
Abstract
Čelik je jedan on najkorištenijih materijala na svijetu, a valjanje najčešći proces njegove deformacije. U ovom radu ispitan je utjecaj plastičnosti materijala tj. njegova anizotropija. Materijal (hladnovaljani čelik DC01) je ispitan emisijskim masenim spektometrom kako bi se utvrdio njegov kemijski sastav te odgovara li standardu. Metalografska analiza je odrađena kako bi se provjerio raspored zrna te njihovo usmjerenje. Nakon toga epruvete rezane pod 0°, 45° i 90° u odnosu na smjer valjanja podvrgnute su statičkom vlačnom testu te dobiveni su različiti rezultati što potvrđuje da se radi o anizotropnom materijalu. Na kraju rada je dan pregled i zaključak s obzirom na različite rezultate mjerenja ovisno o kutu rezanja uzoraka.
Abstract (english)
Steel is one of the most widely used materials in the world, and rolling is the most common process for its deformation. In this study, the influence of material plasticity, specifically its anisotropy, was examined. The material (cold-rolled steel DC01) was analyzed using emission mass spectrometry to determine its chemical composition and conformity to the standard. Metallographic analysis was conducted to verify the grain distribution and their orientation. Subsequently, specimens were cut at 0°, 45°, and 90° with respect to the rolling direction and subjected to a static tensile test, yielding different results, confirming that the material is anisotropic. Finally, the paper provides an overview and conclusions based on the varying measurement results depending on the cutting angle of the samples.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:137:176941
Study programmeTitle: Production Engineering
Study programme type: professional
Study level: undergraduate
Academic / professional title: stručni/a prvostupnik/prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (stručni/a prvostupnik/prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsOpen access
Terms of useLicence In copyright icon
Created on2023-09-27 06:50:06