prikaz prve stranice dokumenta PROCEDURA UMJERAVANJA INSTRUMENATA U PROIZVODNOJ TVRTKI
Access restricted to students and staff of home institution
undergraduate thesis
PROCEDURA UMJERAVANJA INSTRUMENATA U PROIZVODNOJ TVRTKI
Slavonski Brod: University of Slavonski Brod, 2022. urn:nbn:hr:262:465527
Panijan, Luka
University of Slavonski Brod
Department of Engineering

Institutional repository: repository.unisb.hr

Cite this document

Panijan, L. (2022). PROCEDURA UMJERAVANJA INSTRUMENATA U PROIZVODNOJ TVRTKI (Undergraduate thesis). Slavonski Brod: University of Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:262:465527

Panijan, Luka. "PROCEDURA UMJERAVANJA INSTRUMENATA U PROIZVODNOJ TVRTKI." Undergraduate thesis, University of Slavonski Brod, 2022. https://urn.nsk.hr/urn:nbn:hr:262:465527

Panijan, Luka. "PROCEDURA UMJERAVANJA INSTRUMENATA U PROIZVODNOJ TVRTKI." Undergraduate thesis, University of Slavonski Brod, 2022. https://urn.nsk.hr/urn:nbn:hr:262:465527

Panijan, L. (2022). 'PROCEDURA UMJERAVANJA INSTRUMENATA U PROIZVODNOJ TVRTKI', Undergraduate thesis, University of Slavonski Brod, accessed 23 November 2024, https://urn.nsk.hr/urn:nbn:hr:262:465527

Panijan L. PROCEDURA UMJERAVANJA INSTRUMENATA U PROIZVODNOJ TVRTKI [Undergraduate thesis]. Slavonski Brod: University of Slavonski Brod; 2022 [cited 2024 November 23] Available at: https://urn.nsk.hr/urn:nbn:hr:262:465527

L. Panijan, "PROCEDURA UMJERAVANJA INSTRUMENATA U PROIZVODNOJ TVRTKI", Undergraduate thesis, University of Slavonski Brod, Slavonski Brod, 2022. Available at: https://urn.nsk.hr/urn:nbn:hr:262:465527

Metadata
TitlePROCEDURA UMJERAVANJA INSTRUMENATA U PROIZVODNOJ TVRTKI
Title (english)CALIBRATION PROCEDURE IN PRODUCTION COMPANY
AuthorLuka Panijan
MentorOlivera Maglić (mentor)
Committee memberOlivera Maglić (predsjednik povjerenstva)
Committee memberIvica Lacković (član povjerenstva)
Committee memberNataša Veljić (član povjerenstva)
GranterUniversity of Slavonski Brod
(Department of Engineering)
Slavonski Brod
Defense date and country2022-09-28, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Glavni cilj rada je bio prikazati umjeravanje različitih mjernih instrumenata u proizvodnoj tvrtki. U radu će se opisati važnost umjeravanja mjernih instrumenata, te će biti opisana struktura rada. U drugom poglavlju rada bit će opisano umjeravanje, te navodi definicija potrebnih za obavljanje umjeravanja nekog mjernog instrumenta. Treći dio rada donosi organizacijsku shemu poduzeća gdje se radila stručna praksa i koja posjeduje mjerne instrumente korištene za pisanje završnog rada, te proizvodni program tog poduzeća. Slijedi nam opis, fotografije i proračuni izvedeni za svako od tri umjeravanja koja su napravljena s tri različita mjerna instrumenta. Na kraju rada je izveden zaključak.
Abstract (english)
The paper consists of several chapters. In the very introduction of the work, the topic and goal of the work will be presented. The importance of calibration of measuring instruments will be described, and the structure of work will be described. The second chapter of the paper will describe calibration and sets out the definitions necessary to calibrate a measuring instrument. The third part of the work brings the organizational scheme of the enterprise where the internship was done and which has the measuring instruments used for the writing of the final work, and the production program of that enterprise. The following is a description, photos and calculations made for each of the three calibrations that were made with three different measuring instruments. At the end of the work, a conclusion was drawn.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:262:465527
Study programmeTitle: Professional study program in Production Engineering 
Study programme type: professional
Study level: undergraduate
Academic / professional title: stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2022-10-06 08:47:03