prikaz prve stranice dokumenta PLANIRANJE I PRAĆENJE PLANSKOG POPRAVKA ODABRANOG TRANSPORTNOG OBJEKTA
Access restricted to students and staff of home institution
master's thesis
PLANIRANJE I PRAĆENJE PLANSKOG POPRAVKA ODABRANOG TRANSPORTNOG OBJEKTA
Slavonski Brod: University of Slavonski Brod, 2022. urn:nbn:hr:262:829437
Benko, Marko
University of Slavonski Brod

Institutional repository: repository.unisb.hr

Cite this document

Benko, M. (2022). PLANIRANJE I PRAĆENJE PLANSKOG POPRAVKA ODABRANOG TRANSPORTNOG OBJEKTA (Master's thesis). Slavonski Brod: University of Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:262:829437

Benko, Marko. "PLANIRANJE I PRAĆENJE PLANSKOG POPRAVKA ODABRANOG TRANSPORTNOG OBJEKTA." Master's thesis, University of Slavonski Brod, 2022. https://urn.nsk.hr/urn:nbn:hr:262:829437

Benko, Marko. "PLANIRANJE I PRAĆENJE PLANSKOG POPRAVKA ODABRANOG TRANSPORTNOG OBJEKTA." Master's thesis, University of Slavonski Brod, 2022. https://urn.nsk.hr/urn:nbn:hr:262:829437

Benko, M. (2022). 'PLANIRANJE I PRAĆENJE PLANSKOG POPRAVKA ODABRANOG TRANSPORTNOG OBJEKTA', Master's thesis, University of Slavonski Brod, accessed 26 December 2024, https://urn.nsk.hr/urn:nbn:hr:262:829437

Benko M. PLANIRANJE I PRAĆENJE PLANSKOG POPRAVKA ODABRANOG TRANSPORTNOG OBJEKTA [Master's thesis]. Slavonski Brod: University of Slavonski Brod; 2022 [cited 2024 December 26] Available at: https://urn.nsk.hr/urn:nbn:hr:262:829437

M. Benko, "PLANIRANJE I PRAĆENJE PLANSKOG POPRAVKA ODABRANOG TRANSPORTNOG OBJEKTA", Master's thesis, University of Slavonski Brod, Slavonski Brod, 2022. Available at: https://urn.nsk.hr/urn:nbn:hr:262:829437

Metadata
TitlePLANIRANJE I PRAĆENJE PLANSKOG POPRAVKA ODABRANOG TRANSPORTNOG OBJEKTA
Title (english)PLANNING AND MONITORING OF OVERHAUL OF SELECTED TRANSPORT FACILITY
AuthorMarko Benko
MentorTomislav Šarić (mentor)
Committee memberGoran Šimunović (predsjednik povjerenstva)
Committee memberTomislav Šarić (član povjerenstva)
Committee memberRoberto Lujić (član povjerenstva)
GranterUniversity of Slavonski Brod
Slavonski Brod
Defense date and country2022-09-30, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U ovom diplomskom radu prikazani su organizacija servisa, razvoj tehnološke podrške i sami postupci odrađivanja korektivnih popravaka na primjeru motocikla YAMAHA YZ450F. U radu je opisana organizacija servisnih radionica, te sama radionica gdje su se radnje održavale. Nadalje je opisana povijest i razvoj motocikala, te su navedene tehničke karakteristike objekta održavanja, u ovom slučaju je to gore navedeni model motocikla. Kroz četvrtu i petu cjelinu su opisani postupci održavanja vozila, općenito, te je opisana informatička podrška kroz OBD (ugrađena dijagnostika) cjeline, te se još i spominju servisna povijest vozila i nove e-knjižice. U šestoj cjelini je opisan postupak dijagnostike kvara i korektivne radnje, te je oblikovana tehnologija i potrebiti dijelovi. U sedmoj cjelini su kratko opisan MS Project program te je prikazano oblikovanje tehnologije korektivnih radnji u programu MS Project.
Abstract (english)
In this thesis, the service organization, the development of technological support and the procedures for performing corrective repairs are presented on the example of the YAMAHA YZ450F motorcycle. The work describes the organization of service workshops, as well as the workshop itself, where the activities took place. Furthermore, the history and development of the motorcycle is described, and the technical characteristics of the maintenance facility are listed, in this case it is the motorcycle model mentioned above. Through the fourth and fifth units, vehicle maintenance procedures are described, in general, and information technology support through the OBD (built-in diagnostics) unit is described, and the vehicle's service history and new e-booklets are also mentioned. In the sixth unit, the procedure of fault diagnosis and corrective actions is described, and the technology and necessary parts are designed. In the seventh unit, the MS Project program is briefly described and the design of the technology of corrective actions in the MS Project program is shown.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:262:829437
Study programmeTitle: Graduate Study Mechanical Engineering; specializations in: Design and Product Development, Manufacturing Logistics, Materials Engineering, Engineering Technologies, Power Engineering
Course: Manufacturing Logistics
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2022-10-19 09:05:36