prikaz prve stranice dokumenta MJERENJE I ANALIZA ZAOSTALIH NAPREZANJA U ZAVARENIM SPOJEVIMA
Access restricted to students and staff of home institution
master's thesis
MJERENJE I ANALIZA ZAOSTALIH NAPREZANJA U ZAVARENIM SPOJEVIMA
Slavonski Brod: University of Slavonski Brod, 2022. urn:nbn:hr:262:001217
Anđelić, Anton
University of Slavonski Brod

Institutional repository: repository.unisb.hr

Cite this document

Anđelić, A. (2022). MJERENJE I ANALIZA ZAOSTALIH NAPREZANJA U ZAVARENIM SPOJEVIMA (Master's thesis). Slavonski Brod: University of Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:262:001217

Anđelić, Anton. "MJERENJE I ANALIZA ZAOSTALIH NAPREZANJA U ZAVARENIM SPOJEVIMA." Master's thesis, University of Slavonski Brod, 2022. https://urn.nsk.hr/urn:nbn:hr:262:001217

Anđelić, Anton. "MJERENJE I ANALIZA ZAOSTALIH NAPREZANJA U ZAVARENIM SPOJEVIMA." Master's thesis, University of Slavonski Brod, 2022. https://urn.nsk.hr/urn:nbn:hr:262:001217

Anđelić, A. (2022). 'MJERENJE I ANALIZA ZAOSTALIH NAPREZANJA U ZAVARENIM SPOJEVIMA', Master's thesis, University of Slavonski Brod, accessed 08 November 2024, https://urn.nsk.hr/urn:nbn:hr:262:001217

Anđelić A. MJERENJE I ANALIZA ZAOSTALIH NAPREZANJA U ZAVARENIM SPOJEVIMA [Master's thesis]. Slavonski Brod: University of Slavonski Brod; 2022 [cited 2024 November 08] Available at: https://urn.nsk.hr/urn:nbn:hr:262:001217

A. Anđelić, "MJERENJE I ANALIZA ZAOSTALIH NAPREZANJA U ZAVARENIM SPOJEVIMA", Master's thesis, University of Slavonski Brod, Slavonski Brod, 2022. Available at: https://urn.nsk.hr/urn:nbn:hr:262:001217

Metadata
TitleMJERENJE I ANALIZA ZAOSTALIH NAPREZANJA U ZAVARENIM SPOJEVIMA
Title (english)MEASUREMENT AND ANALYSIS OF RESIDUAL STRESSES IN WELDED JOINTS
AuthorAnton Anđelić
MentorIvan Samardžić (mentor)
Committee memberDaniel Novoselović (predsjednik povjerenstva)
Committee memberIvan Samardžić (član povjerenstva)
Committee memberJosip Cumin (član povjerenstva)
GranterUniversity of Slavonski Brod
Slavonski Brod
Defense date and country2022-09-30, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Zaostala naprezanja nastaju kada se objekt (posebno zavarena komponenta) napreže iznad njegove elastične granice, što rezultira deformacijom. Tri su primarna razloga za ta zaostala naprezanja, a to su toplinske varijacije, fazne transformacije i mehanička obrada. Kada je u pitanju toplinska varijacija ona se događa u momentu kada se objekt ohladi s visoke temperature (npr. nakon zavarivanja), gdje često postoji velika razlika u brzini hlađenja cijele komponente. Razlika u brzinama hlađenja površine i sadržaja objekta rezultira lokaliziranim varijacijama toplinske kontrakcije. Cilj ovog diplomskog rada je predstaviti mjerenje i analiza zaostalih naprezanja u zavarenim spojevima. Metode korištene za izradu ovog rada su teorijske i eksperimentalne metode. Zavarivanje duplex čelika potrebno je izvršiti prema prethodno zadanima pWPS-ovima (WPS-ovima) kako bi se ostvarila željena vrijednost kvalitete zavarenoga spoja kako s aspekta izbjegavanja pojave određenih grešaka u samom zavarenom spoju, ali i postizanje optimalnih mehaničkih svojstava i željene korozijske postojanosti čelika.
Abstract (english)
Residual stresses occur when the object (especially welded component) stretches above its elastic limit, resulting in deformation. The three primary reasons for these residual stresses are thermal variations, phase transformations and mechanical treatment. When it comes to heat variation, it occurs at the moment when the object cools from high temperature (e.g. after welding), where there is often a great difference in cooling speed of the whole component. The difference in cooling velocities of the surface and object contents results in localised heat contraction variations. The aim of this graduate paper is to present the measurement and analysis of residual stresses in welded joints. The methods used for the elaboration of this paper are theoretical and experimental methods. Welding of duplex steel should be done according to previously defined pWPS (WPS) in order to achieve the desired value of welded joint quality both from the aspect of avoiding occurrence of certain errors in the welded joint itself and achieving optimal mechanical properties and desired corrosion resistance of steel.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:262:001217
Study programmeTitle: Graduate Study Mechanical Engineering; specializations in: Design and Product Development, Manufacturing Logistics, Materials Engineering, Engineering Technologies, Power Engineering
Course: Engineering Technologies
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2022-10-21 09:19:16