prikaz prve stranice dokumenta Toplinska obrada žiga za utiskivanje oznake
Access restricted to students and staff of home institution
undergraduate thesis
Toplinska obrada žiga za utiskivanje oznake
Slavonski Brod: University of Slavonski Brod, 2021. urn:nbn:hr:262:438293
Čuljak, Krunoslav
University of Slavonski Brod
Department of Engineering

Institutional repository: repository.unisb.hr

Cite this document

Čuljak, K. (2021). Toplinska obrada žiga za utiskivanje oznake (Undergraduate thesis). Slavonski Brod: University of Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:262:438293

Čuljak, Krunoslav. "Toplinska obrada žiga za utiskivanje oznake." Undergraduate thesis, University of Slavonski Brod, 2021. https://urn.nsk.hr/urn:nbn:hr:262:438293

Čuljak, Krunoslav. "Toplinska obrada žiga za utiskivanje oznake." Undergraduate thesis, University of Slavonski Brod, 2021. https://urn.nsk.hr/urn:nbn:hr:262:438293

Čuljak, K. (2021). 'Toplinska obrada žiga za utiskivanje oznake', Undergraduate thesis, University of Slavonski Brod, accessed 11 July 2024, https://urn.nsk.hr/urn:nbn:hr:262:438293

Čuljak K. Toplinska obrada žiga za utiskivanje oznake [Undergraduate thesis]. Slavonski Brod: University of Slavonski Brod; 2021 [cited 2024 July 11] Available at: https://urn.nsk.hr/urn:nbn:hr:262:438293

K. Čuljak, "Toplinska obrada žiga za utiskivanje oznake", Undergraduate thesis, University of Slavonski Brod, Slavonski Brod, 2021. Available at: https://urn.nsk.hr/urn:nbn:hr:262:438293

Metadata
TitleToplinska obrada žiga za utiskivanje oznake
Title (english)TITLE OF THE PAPER
AuthorKrunoslav Čuljak
MentorSlavica Kladarić (mentor)
Committee memberSlavica Kladarić (predsjednik povjerenstva)
Committee memberIvica Lacković (član povjerenstva)
Committee memberNataša Veljić (član povjerenstva)
GranterUniversity of Slavonski Brod
(Department of Engineering)
Slavonski Brod
Defense date and country2021-07-02, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
U završnom radu prikazana je toplinska obrada žiga za utiskivanje oznaka na metal. Rad se sastoji od teorijskog i praktičnog dijela. U teorijskom dijelu prikazana su saznanja o podjeli i vrstama alatnih čelika, njihovoj primjeni u strojarstvu, o utjecaju kemijskog sastava i mikrostrukturi kod toplinskih obrada kaljenja i popuštanja. U praktičnom dijelu završnog rada, za izabrani materijal žiga, u proizvodnim pogonima tvrtke Sigmat d.o.o. u Slavonskom Brodu, na postojećim strojnim kapacitetima, električnoj peći i drugoj potrebnoj opremi, izvršena je priprema uzoraka i toplinska obrada. Na temelju ostvarenih rezultata nakon toplinske obrade usvojen je pravovaljani tehnološki postupak za izradu žiga.
Abstract (english)
The final work presents the heat treatment of s stamp for stamping marks on metal. The work consists of a theoretical and a practical part. The theoretical part presents knowledge about the division and types of tool steels, their application in mehanical engineering, the influence of chemical composition and microstructure in heat treatment of hardening and tempering. In the practical part of the final work, for the selected trademark material, in the production facilities of Sigmat d.o.o. in Slavonski Brod, on the existing machine capacities, electric furnace and other necessary equipment, samples were prepared and heat treatment was performed. Based on the achieved results after heat treatment, a valid technological procedure for making a trademark was adopted.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:262:438293
Study programmeTitle: Professional study program in Production Engineering 
Study programme type: professional
Study level: undergraduate
Academic / professional title: stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva (stručni/a prvostupnik/ prvostupnica (baccalaureus/baccalaurea) inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2021-07-02 11:12:45