prikaz prve stranice dokumenta PRIMJENA TWIN ROBOTIZIRANOG SUSTAVA ZAVARIVANJA
Access restricted to students and staff of home institution
master's thesis
PRIMJENA TWIN ROBOTIZIRANOG SUSTAVA ZAVARIVANJA
Slavonski Brod: University of Slavonski Brod, 2023. urn:nbn:hr:262:350075
Sertić, Dominik
University of Slavonski Brod

Institutional repository: repository.unisb.hr

Cite this document

Sertić, D. (2023). PRIMJENA TWIN ROBOTIZIRANOG SUSTAVA ZAVARIVANJA (Master's thesis). Slavonski Brod: University of Slavonski Brod. Retrieved from https://urn.nsk.hr/urn:nbn:hr:262:350075

Sertić, Dominik. "PRIMJENA TWIN ROBOTIZIRANOG SUSTAVA ZAVARIVANJA." Master's thesis, University of Slavonski Brod, 2023. https://urn.nsk.hr/urn:nbn:hr:262:350075

Sertić, Dominik. "PRIMJENA TWIN ROBOTIZIRANOG SUSTAVA ZAVARIVANJA." Master's thesis, University of Slavonski Brod, 2023. https://urn.nsk.hr/urn:nbn:hr:262:350075

Sertić, D. (2023). 'PRIMJENA TWIN ROBOTIZIRANOG SUSTAVA ZAVARIVANJA', Master's thesis, University of Slavonski Brod, accessed 31 August 2024, https://urn.nsk.hr/urn:nbn:hr:262:350075

Sertić D. PRIMJENA TWIN ROBOTIZIRANOG SUSTAVA ZAVARIVANJA [Master's thesis]. Slavonski Brod: University of Slavonski Brod; 2023 [cited 2024 August 31] Available at: https://urn.nsk.hr/urn:nbn:hr:262:350075

D. Sertić, "PRIMJENA TWIN ROBOTIZIRANOG SUSTAVA ZAVARIVANJA", Master's thesis, University of Slavonski Brod, Slavonski Brod, 2023. Available at: https://urn.nsk.hr/urn:nbn:hr:262:350075

Metadata
TitlePRIMJENA TWIN ROBOTIZIRANOG SUSTAVA ZAVARIVANJA
Title (english)APPLICATION OF TWIN ROBOTIZED WELDING SYSTEM
AuthorDominik Sertić
MentorIvan Samardžić (mentor)
Committee memberMarko Dunđer (predsjednik povjerenstva)
Committee memberIvan Samardžić (član povjerenstva)
Committee memberZlatko Tonković (član povjerenstva)
GranterUniversity of Slavonski Brod
Slavonski Brod
Defense date and country2023-09-12, Croatia
Scientific / art field,
discipline and subdiscipline		TECHNICAL SCIENCES
Mechanical Engineering
Abstract
Ovaj diplomski rad obuhvaća tehnološki razvoj i uporabu twin sustava zavarivanja u postupcima elektrolučnog zavarivanja pod troskom (EPT) i elektrolučnog zavarivanja u zaštiti plina (MIG/MAG). Twin sustav, odnosno, sustav zavarivanja s dvije žice predstavlja proširenje konvencionalnog zavarivanja jednom žicom gdje se koriste dvije žice unutar istog pištolja za zavarivanje. Ova metoda rezultirala je povećanjem stope proizvodnosti u smislu povećanja brzina zavarivanja i stope taloženja. Nadalje, objašnjeni su glavni problemi s kojima se sustav zavarivanja s dvije žice susreće tj. međusobne interakcije električnih lukova pojedinih žica. Opisano je uvođenje ovog sustava u robotizirano zavarivanje te postupci zavarivanja koji su time omogućeni. Drugi dio rada obuhvaća eksperimentalni dio u kojemu se vrši ispitivanje na izrađenim uzorcima te se zatim zapažaju rezultati i na koncu donosi zaključak provedenog ispitivanja.
Abstract (english)
This thesis contains technological development and usage of twin wire welding system in submergerd arc welding (SAW) and gas metal arc welding (GMAW). Twin wire system, that is, the welding system with two wires, is an extension of conventional welding with one wires used inside the same welding torch. This method resulted in an increase in productivity in terms of increased welding speeds and deposition rates. Furthermore, the main problems faced by the welding system with two wires are explained, i.e. mutual interactions of the electric arcs of individual wires. The introduction of this system in robotic welding is described later on. The second part of the work includes the experimental part, in which testing is performed on the manufactured samples, and then the results are observed and finally, the conclusion of the conducted testing is drawn.
Keywords
Keywords (english)
Languagecroatian
URN:NBNurn:nbn:hr:262:350075
Study programmeTitle: Graduate Study Mechanical Engineering; specializations in: Design and Product Development, Manufacturing Logistics, Materials Engineering, Engineering Technologies, Power Engineering
Course: Engineering Technologies
Study programme type: university
Study level: graduate
Academic / professional title: magistar/magistra inženjer/inženjerka strojarstva (magistar/magistra inženjer/inženjerka strojarstva)
Type of resourceText
File originBorn digital
Access conditionsAccess restricted to students and staff of home institution
Terms of useLicence In copyright icon
Created on2023-09-15 10:23:47